Car Jacks

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 3 metre

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 31.7mm. Size ø157mm. Fits saddle ø138-142mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 31.7mm. • Size: ø157mm. • Fits saddle ø138-142mm. • Model No. JP07Technical Specification:Nett Weight: 0.13kgJack Pad Size: ø157mmStyle: Type AProfile Depth: 31.7mmTo Fit Saddle Size: ø138-142mmWeight: 0.13kgDimensions: Length: 20mm x Height: 280mmWeight: 0.4KgWarranty: Consumable

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 15 TonneHydraulic Lift: 150mmMaximum Height: 441mmMinimum Height: 231mmNett Weight: 7.15kgScrew Extension: 60mmTechnical Specification:Capacity: 15 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mmDimensions: Length: 145mm x Height: 250mmWeight: 7.825KgWarranty: 3 years

• Heavy-duty 7 Tonne short axle stands.• Sturdy welded steel construction for superior safety and strength.• Large crutch for good load distribution.• Supplied with captive pin load support.• Suitable for use with forklifts and vehicles with low suspension.• Sold in pairs.Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs.• Min./Max. Working Height: 244/354mm. • Capacity: 14tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Features & Benefits: • Min./Max. Height: 222/447mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Model No. SJ8 Specifications: Model No SJ8 Brand: Sealey Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 4.8kg Screw Extension: 80mm

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…