Effects Pedals

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Battery Operation: Yes
Type: Overdrive;Distortion
Made in: China
UK/EU Power supply included: No

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Made in: China
Power Supply: Adapter
Type: Chorus
Battery Operation: Yes
UK/EU Power supply included: No

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Made in: China
Type: Equalizer;Tube Amp Modeler;Distortion
Battery Operation: Yes
Power Supply: Adapter
UK/EU Power supply included: No

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Type: Fuzz
Battery Operation: Yes
UK/EU Power supply included: No
Power Supply: Adapter
Made in: China

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Made in: China
Type: Distortion;Overdrive
UK/EU Power supply included: No

The OCTAVE DIVIDER is an authentic recreation of the popular Octave Divider from the ‘70s. It features an earth-shaking sub-octave effect with its own MIX and TONE controls so you can blend your dry and sub-octave signal, or shape that tone to your taste while still preserving the dynamics and harmonics. The BASS ONLY switch also allows you to completely cut out the dry signal leaving only the sub-octave so you can create your own complex basslines on the fly. The OCTAVE DIVIDER brings all the amazing features from the original ‘70s design, plus a few modern ones, that are sure to fit right at home with any pedal board. The OCTAVE DIVIDER has an amazing RINGER function that adds …

Pedal Design Foot Pedal

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

Optical wah pedal for electric guitar or bass guitar with adjustable frequency range that provides an array of tone-sculpting options and total optical control for wear-and-tear-free pedal operation without mechanical pots or switches. Its unique spring-back pedal mechanism with resistance adjustment is suitable for any playing style and can be removed. Pedal is equipped with a heel-down Range control that provides free adjustment for low frequency setting (440-250 Hz), additional Fine control that allows for high-end extension of sweep range as high as 2.2 kHz, powerful and tunable volume Boost (up to +15 dB) with on/off switch, and highly versatile Q control that provides precise filter shaping …

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
UK/EU Power supply included: No
Battery Type: 9V
Made in: China
Battery Operation: …

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …