Car Jacks

All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle. Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs. Features & Benefits: • Min./Max. Working Height: 1225/1850mm. • Capacity: 4tonne per stand. • Steel stand. • Pin and chain load support. • Full width crutch. • Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle. • The…

• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Fully certified and approved to comply with MOT req…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Optional fork cradle support for front paddock stands.• Designed to cradle and lift the front forks of a motorcycle for cleaning and storage.• Yellow phosphate finish for added corrosion resistance.• For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.Optional fork cradle support for front paddock stands. Designed to cradle and lift the front forks of a motorcycle for cleaning and storage. Yellow phosphate finish for added corrosion resistance. For safety always ensure that the rear of the bike is supported securely prior to lifting the front end of the motorcycle.• Optional fork cradle support for front paddock stands. • …

• Replacement hydraulic ram for PH20.V4 engine crane.Replacement hydraulic ram for PH20.V4 engine crane.• Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-ETechnical Specification:Nett Weight: 11.8kgRam Capacity: 8000kgRam Diameter: 33.9mmRam Travel: 502mmPump Type: Single SpeedRam Pin Hole Diameter: 16.4mmClevis Pin Hole Diameter: 16.4mmMounting Point Distance (Min.): 636mmOverall Length (Min.): 670mmBase mount Type: Double ClevisDimensions: Length: 130mm x Height: 125mmWeight: 11.852KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• High lift jack arm ideal when lifting a light commercial vehicle.• Fitted with quick lift foot pedal.• Heavy-duty long steel chassis provides easy access to deep set jacking points.• Fitted with one-piece hydraulic unit with built-in safety overload protection.Technical SpecificationCapacity: 2000kgConsumable Parts: Optional Rubber Jacking Pad - JP06Length: 1090mmMaximum Chassis Height: 188mmMaximum Saddle Height: 800mmMinimum Saddle Height: 140mmNett Weight: 58kgTechnical Specification:Capacity: 2000kg Length: 1090mm Maximum Chassis Height: 188mm Maximum Saddle Height: 800mmDimensions: Length: 470mm x Height: 220mmWeight: 66KgWarranty: 1 year

• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base, reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle and fitted with carrying handle.Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base, reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle and fitted with carrying handle.• Min./Max. Height: 180/385mm. • Telescopic hydraulic ram allows a reduced closed height. • Carrying handl…

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360° for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Features foldable legs for easier storage and transport.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. Heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Features folding legs for easier storage and transport. Maximum Load Length: 700mm.• Size (W x L x H): 820 x 1105 x 910mm. • Head swivels through 360°. • Fully adjustable mountin…