Car Jacks

Optional Bobbin Support for Model No. RPS2 and RPS2KD. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance. Features & Benefits: • Optional Bobbin Support for Model No. RPS2 and RPS2KD. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BS Specifications: Model No RPS1BS Brand: Sealey Length: 105mm Nett Weight: 0.34kg Quantity: 2

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's 300ETJ and 500ETJ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's 300ETJ and 500ETJ. • Model No. ADT7 Specifications: Model No ADT7 Brand: Sealey Capacity: 500kg Compatibility: 300ETJ, 500ETJ Nett Weight: 12.02kg

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600TR and ADT3 - Maximum capacity is 500kg. • Model No. ADT3 Specifications: Model No ADT3 Brand: Sealey Capacity: 500kg Compatibility: 300TR, 300TRQ, 600TR, 600TRQ Nett Weight: 10.82kg

Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pages XXX and XXX. If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum. Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links. Features & Benefits: • Handles and levels heavy, off-centre loads quickly and easily. • Ball-bearing handle allows for a smooth and easy adjustment. • Three adjustment holes accommodate different sized engines. • Ide…

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of rear wheel. For full floating movement, use in conjunction with FPS1MD. Features & Benefits: • Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. • Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle. • Design ensures rim and tyre protection at all times. • Once the bike is supported, allows easy removal …

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of front wheel. Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD). Features & Benefits: • Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. • Features width adjustment from 185 to 265mm, making it suitable for …

Single-piece hydraulic unit with heavy chassis design and large jacking saddle (Pad available as optional extra - Model No. JP14). Universal joint release mechanism allows safer, more controlled lowering of the jack. Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5tonne GVW. Supplied with Ratchet Type Axle Stands, 3tonne (3000kg) capacity per stand (6tonne (6000kg) per pair). Min./Max. Working Height: 285/420mm.…

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 23.8mm. Size 108mm. Fits saddle 106-108mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22.7mm. Size 122.7mm. Fits saddle 122-126mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 31.4mm. Size 140mm. Fits Saddle 139-140mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size 104mm. Fits saddle 93-95mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size 136.5mm. Fits saddle 136.5mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 6.4mm. Size 106.5mm. Fits saddle 99-106mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size 137.5mm. Fits saddle 116-123mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size 148mm. Fits saddle 128-131mm.

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle 100-106mm.

Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 5 tonne. • Model No. WC02

Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 3 tonne. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for vehicles below 3 tonne. • Model No. WC01

Single nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne. Features & Benefits: • Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10 Tonne. • Model No. WC03

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. • Incorporates wheel guards to prevent contact with other tr…

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. • Model No. PT1000 Specifications: Model No PT1000 Brand: Sealey Nett Weight: 12kg Capacity: 1000kg Test Load: 1500kg Track Width Adjustable Range: 64-140mm Minimum Curve Radius: 1000mm A: 255mm B: 127.5…

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. • Model No. PT500 Specifications: Model No PT500 Brand: Sealey Nett Weight: 7kg Capacity: 500kg Test Load: 750kg Track Width Adjustable Range: 64-140mm Minimum Curve Radius: 800mm A: 212mm B: 115mm C: 115mm…