Car Jacks

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.

• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• N.B. Support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250Technical Specification:Capaci…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size ø137.5mm. Fits saddle ø116-123mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø137.5mm. • Fits saddle ø116-123mm. • Model No. JP06Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø137.5mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø116-123mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.284KgWarranty: Consumable

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

• Lifts and stabilizes any dual swing arm motorbike quickly and easily.• Fitted with width and angle adjustable rubber support pads.• Rubber supports mounted on heavy-duty box section for continuous professional use.• Bobbin Supports available as an optional extra - Model No. RPS1BS.• Delivered in knock-down form to reduce freight costs, some self-assembly required.• Min./Max. Width: 220-350mm.Technical SpecificationNett Weight: 4.3kgMinimum/Maximum Width: 220-350mmTechnical Specification:Minimum Width: 220mm Maximum Width: 350mmDimensions: Length: 110mm x Height: 470mmWeight: 4.8KgWarranty: 1 year

• Heavy-duty 6 Tonne axle stands.• Sturdy welded steel construction for superior safety and strength.• Supplied with captive pin load support.• Range available in five different colours.• Sold in pairs.• 2 Year guarantee*.Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs.• Min./Max. Working Height: 369/571mm. • Capacity: 12tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 2 …

The Master Lock Carry Strap No. 3126EURDAT features a 2.5m long x 25mm and 5.5m long x 25mm crossed straps with zamac buckles. They are a readymade carrying solution with a strap and an integrated handle.They are ideal to carry cartons or pieces of furniture, the metal cam buckle enables you to adjust the length of the strap. The two handles with foam finish make the use even more comfortable. Colour: Red.Strap Width: 25mm. Additional Information:• Length: 2.5 & 5.5m• Type: Carry Strap• Load Capacity: 80kg