Effects Pedals

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Made in: China
Plug Type: Barrel
Polarity: Center Minus
Voltage: 9V
Current (mA): 1300.0

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Power Supply: Adapter
UK/EU Power supply included: No
Made in: China
Type: Equalizer

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

Overdrive effect pedal that was designed specifically for bass guitars and supports their entire frequency range, including 5- and 6-string basses, and delivers rich, tube-like distortion, smooth sustain and fat tone. Effect provides unique Balance control for mixing the overdriven signal with natural dry bass sound, as well as dedicated Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Overdrive;Equalizer;Distortion
Made in: China
UK/EU Power supply …

9V/660mA power adapter with negative centre that has been primarily designed for Strymon effect pedals.
Plug Type: Barrel
UK/EU Power supply included: No
Current (mA): 700.0
Power Supply: 240V
Current: 501-700 mA
Polarity: Center Minus
Number of Outputs: 1
Voltage: 9V
ChargerType: AC adapter
Made in: China

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Equalizer
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes
Made in: China…

Pedal Design Foot Pedal

Pedal Design Foot Pedal

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Type: Distortion;Overdrive
Made in: China
UK/EU Power supply included: No

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.