Printer Parts

These volcano nozzles are made of durable brass materials, and the V6 standard nozzle with M6 thread is perfect for your 3D printers.

1. Adopting high-quality thermoforming, high-temperature carburizing, and hardening treatment, this nozzle has super wear resistance, heat resistance, high hardness, high toughness, and long service life. It is compatible with most high-temperature printing filaments on the market.2. The bottom of the nozzle is flat and fits perfectly with the throat, effectively avoiding material leakage, and the chamfer is rounded to reduce the resistance of the edges to the consumables.Tips for nozzles:When disassembling, heat to over 200 Celsius before disassembling!

Easy to install and wire.Position/speed/torque closed-loop, it can run at high speed without losing a step.Field-Oriented Control, low noise, low vibration, and Low calorific.4 half-bridge drivers with 8 MOSFET bring high operating efficiency.14-bit magnetic encoder, high angle resolution.Support 1-256 subdivision, odd subdivision(such as 11 subdivision) is also available.Support motors with 0.9 degrees or 1.8 degrees.Maximum speed 1000RPM.With the user interface, you can connect the computer by serial port, for parameter adjustment and query.

1. This double Z-axis construction upgrade kit has a stable and smooth operation with all-aluminum coupling and a 42-stage stepper motor.2. It features upgrade double screws, high precision, good dustproof smooth sliding, and max mute in high-speed operation.

HD Quality Video Creality K1 AI camera delivers HD quality video and real-time viewing possibilities of printing status through Creality Cloud or Creality Print.Enable AI Detection Before printing, if an unknown object is detected, the printer will be automatically paused to prevent collision with the hot end. During printing, if a printing failure is detected, the printer will be suspended automatically to reduce the waste of filaments.Time-lapse FilmingCreality K1 AI camera allows you to log into Creality Cloud to automatically create time-lapses for sharing.K1 AI CameraHD QualityAl DetectionTime-lapse FilmingEasy to installHD Quality True-to-Life VideoCreality K1 AI Camera supports

This hotbed uses zoning heating without the need for motherboard support, and the hotbed can also achieve 120120mm middle-range zoning heating. It can be used in more than 90% of ENDER-3 series models on the market.The heating time is 20% faster than the ordinary hotbed.When the printing model ranges in the middle of the 120120mm range in the hotbed, there is a partition switch to turn him off, which theoretically can achieve power savings of 70%, measured 24 hours can save 0.5 kWh of electricity, to achieve energy saving.The new zoning hot bed uses a new spraying technology, black spraying than gold PEI better adhesion, printing PLA temperature at the same time in the case of 60 Celsius,

This product is a high-quality lightweight compact ceramic. Specially customized hotend core heating for Prusa MK4 & XL can be a drop-in replacement.

1. Use two titanium alloy screws to connect and fix to avoid bending and breaking of the throat during high-speed printing;2. The radiator and throat can be disassembled and locked with side top screws and titanium alloy screws to reduce usage costs;3. The heating block is treated with chromium zirconium copper nickel plating, which has fast thermal conductivity and high-temperature printing resistance. The titanium alloy throat is wrapped with chromium zirconium copper for better heat dissipation.

This hotend kit is upgraded. The heating block is upgraded to chromium-zirconium copper nickel plating treatment, it supports a 500 Celsius high-temperature printing, and fast heat conduction.The radiator and heat break can be disassembled and locked by the side fixed shaft to reduce the use cost.The interference of the TC4 titanium heatbreak tube and the heat block increases the step surface at the bottom of the throat to completely eliminate the phenomenon of falling off and reduce the possibility of leakage.The nozzle is connected by thread, and in contact with the bottom step of the heatbreak to completely solve the phenomenon of falling off and reduce the possibility of

1. There is a layer of hardened film on the surface of the magnet to prevent the surface from being easily scratched, crushed, torn, peeled off, heated degummed, etc., to ensure that the magnet is more durable and has a longer life.2. Using magnetic stickers with higher temperature resistance, the temperature resistance is about 100°C. Compared with the magnetic stickers with a temperature resistance of only about 80°C, materials with higher platform temperature requirements can be printed.3. Using 1.5mm thick strong magnetic stickers, the overall magnetism is improved to prevent deformation and warping of the steel plate.Precautions:1. The surface cannot be touched with a high-temperature

1. High-quality: Made of high-quality material, it is durable and has a long service life.2. Plug & play: High and low-temperature resistance, no need to replace the battery, simple and convenient.

Double-Sided Textured / Smooth PEI Printing PlatformThis PEI plate has two different build surfaces to meet different printing needs. One side is PEI film with a smooth surface, and has a good effect on the model's bottom surface; The other side is the black textured PEI that has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEI and can be switched freely.Durable and Long Lasting The build surface with PEI textured coating has strong adhesion to the printed model and cannot be scratched, worn, or warped easily.Easy Model Removal The spring steel plate not only has high flatness but also has good elasticity, it

TWO TREES All Metal Geared Extruder Right Cloned Dual Drive Extruder - Black

TWO TREES All Metal Geared Extruder Right Cloned Dual Drive Extruder - Silver

TWO TREES All Metal Geared Extruder Left Cloned Dual Drive Extruder - Silver

Double-Sided Textured / Smooth PEI Printing PlatformThis PEI plate has two different build surfaces to meet different printing needs. One side is PEI film with a smooth surface, and has a good effect on the model's bottom surface; The other side is the golden textured PEI that has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEI and can be switched freely.Durable and Long Lasting The build surface with PEI textured coating has strong adhesion to the printed model and cannot be scratched, worn, or warped easily.Easy Model RemovalThe spring steel plate not only has high flatness but also has good elasticity, it

TWO TREES All Metal Geared Extruder Left Cloned Dual Drive Extruder - Black

1. PEY has star pattern, making the mode beautiful.2. This build plate has double-sided printing surface, which is convenient and practical, saving and protecting the environment.3. PEI high-temperature resistance, good scratch resistance, adhesive strongly.4. No glue, easy to use, anti-warping, and strong stickiness.5. Stainless spring steel, good flatness, easy to take the mode.6. Easy to clean, wipe it off with a wet tissue or alcohol before printing.7. PEY and PEI sheets can work at 160°C-180°C for a long period, PEY can not over 180°C, PEI can not over 260°C.

TWO TREES short-stroke extruder bracket wheels motor MK8 hotend full kit is suitable for most 3D printers, such as CR10, Ender-3, Ender-5, etc.

This is a clear extruder gearbox cover designed specifically for the Prusa MK4. After installing it you can more easily observe the operation of the extruder gears and add fun to your printing.

High Flow & 600mm/s High-speed Printing SupportPrinting at breakneck speeds up to 600mm/s is now a breeze, thanks to the expanded hot melt section, providing a 32% increase in length (28.5mm) for flawless high-speed printing.Copper Alloy + Hardened Steel Heat Break MaterialStainless steel with extremely thin wall thickness has excellent thermal insulation performance, while pure copper has excellent thermal conductivity, which can speed up heat conduction, so the overall performance is better.Compatible with Creality K1 SeriesThe Ceramic Heating Block Kit is tailor-made for seamless integration with Creality K1 Max, K1C, and K1 3D Printers, ensuring a perfect fit and exceptional

1. Compatible with many types of printing consumables, supporting PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD, and other consumables.2. Easy to take the mold, remove the steel plate after printing and cooling, and gently bend the model can be detached.3. The use of high elastic folding stainless steel plate, folding, and bending resistance.4. High-temperature resistance, large adhesion, after the frosted surface, do not apply glue printing ABS and other easy warping materials.

1. Expertly crafted with high-precision CNC machining, our XY Axis Joint Kit offers exceptional accuracy, lightweight strength, and ease of installation. Designed for durability and stability, it ensures your printer operates smoothly and consistently over long periods.2. Our design replaces all bearing rotation shafts with precision pins, resulting in smoother, more precise motion. This upgrade enhances durability and accuracy, making your prints more reliable and your printer more efficient.3. Featuring a lightweight yet rigid design, our XY Joint utilizes bearing idlers and requires no gaskets for installation. This innovative structure reduces inertia, boosts printing speeds, and

1. The consumables compatible with printing are PLA, PETG, ABS, TPU, TPE, HIPS, PA-CF, WOOD and other consumables.2. Easy to take the mold, remove the steel plate after printing and cooling, and gently bend the model can be detached.3. Adopt high elasticity folding stainless steel plate, folding and bending resistance.4. High-temperature resistance, large adhesion, after frosted surface, do not apply glue printing ABS and other easy warping materials.5. PET diamond texture texture surface has diamond texture on the bottom of the printing surface, which is more beautiful.