Crimpers & Strippers

Total length: 190mm Aluminum alloy body Cutting capacity: diameter 6/42mm

Purpose: A pin that holds the blade of a pipe cutter. Compatible model: 32880 Product name: Wheel pin

Application: For cutting copper pipes, aluminum pipes, brass pipes, hard PVC pipes, stainless steel pipes, etc. Cutting capacity (outer diameter): 4~32mm Thickness 1: 2mm or less for copper pipes, aluminum pipes, brass pipes, and hard PVC pipes. Thickness 2: 1mm or less for steel pipes and stainless steel pipes Mouth opening/closing method: One-touch type/turn the knob Specification 1: With simple chamfering tool Specification 2: Replaceable blade type Spare blade: GTPC-WB

Automatic wire stripper that can handle a wide range of wire sizes. Adjustment slide supports a wide range of wire sizes from AWG30 to AWG10. Compatible with flat cables and ribbon cables up to 7mm wide. Comes with a strip gauge that allows you to adjust the strip length from 3 to 18 mm. Wires can be stripped from the front, making it possible to work near walls or in narrow spaces.

Cutting capacity: HT pipe, plastic pipe: 20-50Φmm Sealing sleeve: 20-50Φmm Total length: 72 (mm) Mass: 108 (g) You can cut pipes without cutting chips. Can cut high-temperature plastic pipes, drain pipes, electrical conduits, etc. The body is made of reinforced plastic, the blade unit is made of die-cast zinc, and the blade is made of special Solingen surgical stainless steel.

For bare crimp terminals and bare crimp sleeves (B/P). Compact type that can be operated with one hand. Recommended for those with small hands. The toggle mechanism allows crimping with light force. Speedy continuous work is possible. Comes with a molding confirmation mechanism (ratchet). The connection terminal cannot be removed from the tool unless the crimping work is completely completed. JIS C9711 compliant product. After crimping is completed, a mark will be placed on the terminal so that you can see which die was used. Adopts an elastomer grip that is easy to grip and non-slip. You won't feel tired even when working for long hours. Furthermore, it is RoHS compliant and environmentally …

Flexible pipe cutter flange removal tool 2 piece set on sale! Please use it for DIY water supply cutting and repair♪ [What is a flexible pipe?] A flexible pipe is a pipe used in wash basins and water areas. Specifically, it is used in water supply pipes under washrooms, washlet toilets, and hot water supply pipes. [Flexible Pipe Cutter] Cut pipes quickly! : Useful when installing toilet washlets, sinks, and connecting hot water pipes. This roller type pipe cutter can cut diameters of approximately 4-32mm, so it can be used for a wide variety of types. [Flame removal tool feature] After cutting the flexible cable, it is a tool that flattens both ends to create a brim so that you can connect nu…

The handle is forged from carbon steel and is strong.

Total length: 176mm Mass: 240g Applicable size: 1.25, 2, 3.5, 5.5 Specifications: Crimp mark, lightweight, mini, terminal holder Applicable terminals: For bare crimp terminals and sleeves

Applicable pipe outer diameter inches (mm): 1/4 to 1 1/4 (13 to 40.3) Total length (mm): 135

Cutting capacity (φmm): 13-32 Weight (g): 46 Size (mm): 86 x 38 x 100 Easy to handle. Simply compress the TwistCut and turn with a little pressure. It is also suitable for protecting aluminum composite pipes in sanitary facilities (maximum diameter 32 mm). Because the cut is always made at the crest of the wave, the cut edge is more accurate and does not damage the internal cable. Slim and ergonomic design, suitable for working in hard-to-reach areas. With 0.2mm-4.0mm cable strip hole. Convenient positioning supports make it easy to set and strip single wire. Comes with a length scale to ensure uniform stripping at the same length. Can be read by both right-handed and left-handed people.

Please refer to the product image.

Size: H200 x W50 x D15mm Cutting ability: iron wire/diameter 4.0mm, copper wire/diameter 4mm, hard wire/diameter 2.5mm, piano wire/up to diameter 2.0mm Material: Blade/HSS steel, Grip/TPR

Type: Single item Packing size: 10.0cm x 10.0cm x 10.0cm Total length (mm): 195 Color: yellow

Total length (mm): 277 Crimp terminal: E-type ring sleeve small (1.6mm x 2), small, medium, large Mass (g):430

Usage range: 1.25, 2, 5.5, 8mm

*Applicable range: Only for soft copper/iron/steel/aluminum/brass pipes (Please note that only soft pipes can be used.) *Applicable pipe outer diameter: 16mm (5/8'') *Applicable pipe wall: Can bend pipes as thin as 0.4mm. *Bending radius: 54.4mm *Bending angle: 0~180° [Please note] This product is an overseas product, so please check the product specifications carefully before ordering. Also, please be sure to include your shipping address or phone number when making your payment. If you have any questions or concerns about our products, please feel free to let us know. We will reply within 24 hours. [Product specifications/specifications]: Model: CT-364A-10 Applicable range: Exclusively for s…

Compatible models: 210110, 210120, 210130

Compatible models: 210220, 210265

Cutting capacity inches (mm): 3/16 to 1 1/8 (4 to 28) Maximum wall thickness (mm): 1 Total length (mm):83 Standard spare blade: RB28SK ●Cutting thin-walled stainless steel pipes. [Note] ●We cannot specify the delivery time. note that

Total length: 230mm; Weight: 600g Crimping capacity: AWG24-14 (0.5-2.0mm^2) Application: Compatible with Amon's round bullet terminal, flat bullet terminal #250/#187, dynamic connector D-3000 series D-3 contact 2L/3L Crimping dies (4 sizes): 0.5sq, 0.75sq, 1.5sq, 2.0sq Features: ① Simultaneous crimping of core wire and coating, ② Compliant with international standard DIN IEC 60352-2, ③ Ratchet mechanism/ratchet emergency release Bullet terminal crimping tool Crimp Faston terminals 187 and 250 series, bullet terminals, open barrel terminals, etc. Crimp the core wire (wire barrel) and sheathing (insulation barrel) at the same time. Compliant with international standard DIN IEC 60352-2. The width …

Applicable size (inside and outside) 3/16~1-1/2 (4mm~38mm)

●Cutting capacity (mm): 42 ●Total length (mm): 225 ●Compatible spare blade: BLD/PCT/RT/42

Total length: 230mm; Weight: 600g Crimping capacity: 0.5-2.0mm² *Note: mm²≒sq Application: Compatible with Amon's round bullet terminal, flat bullet terminal #250/#187, dynamic connector D-3000 series D-3 contact 2L/3L Crimping dies (4 sizes): 0.5sq, 0.75sq, 1.5sq, 2.0sq Features: ① Simultaneous crimping of the core wire and coating, ② EDM processing has a high elastic modulus of the die, making it easy to remove even thick round bullets (male) after crimping, ③ Ratchet mechanism / ratchet emergency release