Crimpers & Strippers

Type: For mm Applicable pipe diameter: 10 Bending radius R:24 Bending radius R (mm): 24 Model:610M Dimensions (mm) Left hand:- Total length (mm): 520 Dimensions (mm) Right hand:- Bending angle (°): 90~180 steel

Capacity (pipe outer diameter): Diameter 16/35mm Size: 240(L)×102(W)×54(H)mm Weight: 960g Target pipe: Copper pipe (thickness: /3.2mm), stainless steel copper pipe (thickness: 1.5/3.0mm) automatic feed mechanism Comes with 1 spare blade for copper pipes and stainless steel pipes The ratchet mechanism and rotary head allow you to work easily even in tight spaces. It has a special blade that is less likely to generate chips, sparks, and burrs.

Crimping pliers for tubular terminals, 4-sided crimping. Reduced lever stress. L: 173mm A: 61m B: 13mm

●For Teflon wire, ETFE wire, aerospace wire, PVC wire, wrapped single wire, and other thinly coated wires. ●Total length (mm): 150 ●Applicable wire: AWG24~30 ●Mass (g): 180 ●Wire stopper LB-1195 ●The body comes with a knife.

●For Teflon wire, ETFE wire, aerospace wire, PVC wire, wrapped single wire, and other thinly coated wires. ●Total length (mm): 150 ●Applicable wire: AWG24~30 ●Mass (g): 180 ●Wire stopper LB-1195 ●The body comes with a knife.

Please refer to the product image.

●For Teflon wire, ETFE wire, aerospace wire, PVC wire, wrapped single wire, and other thinly coated wires. ●Total length (mm): 150 ●Applicable wire: AWG16~22 ●Mass (g): 180 ●Wire stopper LB-1195 ●The body comes with a knife.

●If you replace the two rollers with the blade, you can make it three blades. ●For steel pipes. ●Total length (mm): 500 ●Cutting capacity in inches (mm): 1/8~2 (3~50) ●Standard spare blade: F-514 ●Mass (kg): 3.2 Country of origin: America

As we are a Japanese shop, please take the following precautions when purchasing certain products. [Precautions when using electrical appliances] When using electrical appliances, please note that the voltage is different from that in Japan and may cause malfunctions. The plug type is Japanese type (A or B type), so please check the voltage before using a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. Category: R VG hand unit blind rivet box.

Drilling dimensions: Diameter 13mm (common to iron and stainless steel) Material: Heat treated steel pipe/rolled material for general structure Specifications: With handle stopper Compatible rail: Duct channel, raceway, pipe hanger

For MQS connector (mm [[square of]]) For Mini-Fit(R): AWG For Micro-Fit(TM) For 9754-26 For 9754-27 For 9754-25

Total length (mm): 250●For crimp terminals ([[MM2]]) connection terminals: 0.5~6.0●For crimp terminals ([[MM2]]) bare terminals: 0.5~10.0 Crimp terminal ([[MM2]]) for insulated terminals: 0.5~6.0●Crimp terminal ([[MM2]]) B sleeve: 0.25~6.0●Body chrome vanadium steel Bare crimp sleeve 1.5~4.0 6.0+10.0 Only one tool is needed for most common crimps. Crimping dies can be easily and quickly changed without additional tools.

As we are a Japanese shop, please take the following precautions when purchasing certain products. [Precautions when using electrical appliances] When using electrical appliances, please note that the voltage is different from that in Japan and may cause malfunctions. The plug type is Japanese type (A or B type), so please check the voltage before using a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. ●Quantity (pieces): 1 ● Troreel HS (high speed) ●Sheath cutter

●Chrome vanadium steel

Quantity: 1 piece Size: 234×92×39mm

Drilling dimensions: Diameter 10mm (common to iron and stainless steel) Size: Total length 680mm, Weight: 5kg, Specifications: Handle stopper included Compatible rail: Raceway pipe hanger Compatible rail size: width 40mm, height 45mm or less, thickness (iron) 2mm or less (stainless steel) 1.5mm or less Material: Heat treated steel pipe/rolled material for general structure

L:335 W:135 Turning radius: 90 H:62 Cutting capacity (when using PCRK-FS): Steel pipe 25A~50A: up to 3.8mm

As we are a Japanese shop, please take the following precautions when purchasing certain products. [Precautions when using electrical appliances] When using electrical appliances, please note that the voltage is different from that in Japan and may cause malfunctions. The plug type is Japanese type (A or B type), so please check the voltage before using a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. Total length (mm): 250 Crimping range: 25~50mm (AWG4-0) Sleeve: for 1 piece Crimping range (sleeve for 1 piece): 25~50mm (AWG4-10)

As we are a Japanese shop, please take the following precautions when purchasing certain products. [Precautions when using electrical appliances] When using electrical appliances, please note that the voltage is different from that in Japan and may cause malfunctions. The plug type is Japanese type (A or B type), so please check the voltage before using a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. ●Crimp range (sleeve for 2 pieces): 6~16mm [[square of]] (AWG10-6) [Features] ●Select the optimal position from the three crimp grooves according to the wire size and crimp.　 ●The u…

Cutting capacity inches (mm): 2~4 (50~110) Maximum wall thickness (mm): 8 Total length (mm): 305 Standard spare blade: 210621

Professional Quality crimping pliers with a round magazine and five interchangeable dies. Used for crimping non-insulated open plug type connectors, insulated terminals, plug connectors, butt connectors, insulated and non-insulated end sleeves (ferrules) from 0.25 - 6 mm. Manufactured from oil-hardened chrome vanadium steel fitted with a round magazine that provides sorted and protected storage of interchangeable dies enabling the crimping dies to be changed quickly and easily.

As we are a Japanese shop, please take the following precautions when purchasing certain products. [Precautions when using electrical appliances] When using electrical appliances, please note that the voltage is different from that in Japan and may cause malfunctions. The plug type is Japanese type (A or B type), so please check the voltage before using a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. Cutting capacity inches (mm): 2 1/4~4 (60~100) Total length (mm): 305 Maximum wall thickness (mm):- Standard spare blade: 33170 Model name:109 Standard spare blade: 33170

Cutting capacity inch (mm): 3/4~2 (20~50) for steel pipes Total length (mm): 480 Standard spare blade: 41082

Quantity: 6