Chains & Reciprocating Saw Blades

The Torch with Nitrus Carbide for thick metals is the next generation of carbide teeth technology. This Sawzall blade with Nitrus Carbide teeth allows you to cut longer, cut more and cut faster than traditional carbide teeth products on the market today. Milwaukee Nitrus Carbide technology eliminates the tradeoff between life and speed of cut compared to traditional carbide teeth blades. The blade delivers 3x the life of existing carbide teeth reciprocating saw blades to continuously make the toughest removals on the job. Constructed with 25% more Nitrus Carbide per tooth and a 1/2 inch universal tang, The Torch Sawzall blade with Nitrus Carbide is designed to cut the thickest metals. With the …

In vehicle rescue, getting into a car fast can be a matter of life and death. Emergency services are increasingly using reciprocating saws as a valuable rescue tool, but they require a seriously good blade that can reliably cut through modern automotive steel. The EXPERT 'Vehicle Rescue' is designed for this crucial task. Built with Bosch Carbide Technology, the Bosch EXPERT 'Vehicle Rescue' Reciprocating Saw Blade cuts modern vehicles fast and reliably – and helps you save lives.Features:- Cutting Modern Automotive Steel- Exceptional durability is built in with Bosch Carbide Technology.- First tooth designed to allow plunge cut.- Fits all S-shank reciprocating saws.- Tapered tip reaches deeper in…

Jigsaw Saw Blade / Wood / Quantity 100 Piece

Thick and Thin Materials - The T 345 XF Progressor for Wood and Metal Jigsaw Blade delivers fast straight cuts in thin and thick wood with metal. Its tooth geometry with a progressively increasing tooth pitch allows for work in materials with a wide range of densities. Additionally, the blade’s milled, side-set teeth are designed for fast cuts. Made from BIM (bi-metal), its fully hardened HSS (high-speed steel) tooth strip is bonded with its highly elastic HCS (high carbon steel) body, making the blade appropriate for cutting metal-embedded wood with standard-strength steel components. Equipped with a large progressive tooth pitch (2.4-5 mm) and long length (132 mm), it cuts a wide variety of…

For use with reciprocating saws with 1/2 inch universal shank systems. The S 1256 XHM Progressor for Wood and Metal Reciprocating Saw Blade delivers ultimate blade life for demolition in thick and thin materials. It features ground carbide teeth specially designed for demolishing high-strength steel embedded in wood. The blade’s progressively increasing tooth pitch enables fast cuts in materials with a wide range of densities, while its wide tapered body (25 mm) and thick gauge material (1.25 mm) provide the stability necessary for demolition work. Moreover, the reciprocating saw blade’s teeth are welded to a highly elastic steel body with Carbide Technology, making it suitable for the toughest wood…

Highly Durable - The Expert for Fibre Cement Circular Saw Blade is highly durable when cutting fibre cement. It features PCD (polycrystalline diamond) teeth, providing a long lifetime of usage. Its performance is further supported by ProteQtion coating, which prevents corrosion and delivers reliable cutting while reducing friction. Additionally, the blade is specially designed with anti-vibration slots for particularly smooth cutting, considerably less noise and significantly reduced vibration. It is compatible with mitre and sliding mitre saws. The Expert for Fibre Cement Circular Saw Blade features TCG (Triple Chip Grind) teeth for high robustness and a long lifetime. Bore works with or without …

Lasts up to 50x longer than a Bi-Metal blade - Striking cement behind a doorframe or under a floorboard used to bring work to a halt for an expensive blade change. Not with the EXPERT MultiMaterial Segment, a blade tough enough to cut grout and mortar as well as solid surface counter tops and abrasive laminates and composites. It just keeps on going. With its wide body and large curve of sharp carbide teeth, the EXPERT MultiMaterial Segment Blade offers both precision and stability, combined with the extreme durability of Bosch Carbide Technology. Its extremely hard tooth strip, achieved through advanced manufacturing expertise, cuts the toughest and most abrasive materials. The Bosch EXPERT …

Lasts up to 50x longer than a Bi-Metal blade - Whether you work on buildings or vehicles, a multitool blade that makes a great cut in any material can make working life a lot easier. Integrating all of Bosch’s most advanced manufacturing techniques, the EXPERT MultiMax brings unrivalled versatility to your multitool. This top-of-the-range multitool blade boasts the very latest in Bosch Carbide Technology: its strip of ultra-hard teeth use Bosch’s unique Curved-Tec design, so it is the first blade to manage chatter-free plunge cuts in sheet metal. Additionally, the latest incarnation of the EXPERT MultiMax boasts extra coating on its carbide teeth for even greater longevity. Bosch Curved-Tec blad…

The range of metal cutting blades are optimised for cutting steel, aluminium or stainless steel. Through a proprietary in-house process tooth alignment has reached a level to give a smooth accurate cut, minimising vibration and burring. Features & Benefits • Crafted with 12% titanium carbide, DeWalt Metal Cutting saw blades tackle tough steel cutting applications with ease • Modified ATB tooth geometry provides clean, burr-free cuts, and expansion slots dissipate heat, extending blade life • Tri-foil braze boosts the strength of each tooth tip for extreme durability Specifications • Blade Diameter: 355mm • Teeth Count: 66 • Bore Diameter: 25.4mm • Kerf Thickness: …

Dewalt 11 Piece BIM Extreme Electrians Holesaw Set. Contains 7 different size Bi-Metal Holesaws ranging from 16mm to 64mm, 2 holders with hexagonal shank and 2 centering points. Features and Benefits • Up to 2X Longer Life vs prior generation Dewalt Bi-Metal Hole Saws • Patented tooth forms optimize chip removal for efficient drilling and long life • Fast Plug Ejection • Large, continuous slot provides leverage for easy plug ejection and removal • Versatile Drilling Performance • High Speed Steel cutting edge effectively drills through wood, metal and plastic • Designed for Thick Materials • Deep hole saw design allows for cutting 2-by dimensional lumber …

Cuts materials that other blades simply can’t - For builders and bricklayers, cutting hollow bricks on site allows work to proceed rapidly and productively. However, most reciprocating saw blades couldn’t last long in such abrasive mineral materials. With a specialist carbide blade like the EXPERT ‘Hollow Brick’, bricklayers can cut hollow brick to size conveniently, and without destroying their blades. In order to take on tasks that conventional Bi-Metal recip saw blades couldn’t do, the Bosch EXPERT ‘Hollow Brick’ Reciprocating Saw Blade uses Bosch Carbide Technology and is especially designed for cutting hollow brick. Its wide body and thick gauge ensure stability for tradesmen to make an acc…

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Milwaukee Heavy Duty TORCH Carbide Reciprocating Saw Blade. Carbide teeth provide for longest life in thick metals with up to 50x more life compared to Bi-Metal blades. Thick 1.27 mm robust blade body for precise straight cuts. 25 mm blade height for improved stability and minimum vibration. Best suited for cast iron and all thick metal demolition. Specifications • Blade Length: 230mm • Max. Cutting Capacity (Cast Iron Pipes): 10-175mm • Max. Cutting Capacity (Metal Pipe): 10-175mm • Max. Cutting Capacity (Non Ferrous Metals): 5-13mm • Max. Cutting Capacity (Stainless Steel): 5-13mm • Max. Cutting Capacity (Steel): 5-13mm • Pack Quantity: 5 Features and Benefits …

Highest Wear Resistance - The Expert for Stainless Steel Circular Saw Blade is highly wear-resistant when cutting stainless steel. The blade´s unique Resisteq teeth are manufactured from advanced metallic composites for extreme robustness and durability. Proteqtion coating prevents corrosion and delivers reliable cutting while reducing friction, further supporting performance. Moreover, the blade´s high quality guarantees smoothest results without reworking the stainless steel workpiece. The saw blade is compatible with hand and mitre dry cutters. The saw blade is compatible with mitre dry cutters. Featuring HLTCG (High-Low Triple Chip Ground) tooth geometry, the Expert for Stainless Steel Ci…

Lasts up to 50x longer than an HCS blade in tough material - There’s softwood, there’s hardwood, and then there are those tough woods that destroy saw blades and make your life miserable. Wet lumber, thick pressure-treated planks and knotted living roots or thick branches fall into this awkward category – and the EXPERT ‘Tough Wood’ can cut them all. Extreme durability is built into the Bosch EXPERT ‘Tough Wood’ Reciprocating Saw Blade with Bosch Carbide Technology – the hardest metal is integrated into the tooth structure using advanced design and manufacturing techniques. Its large gullets are designed for fast cuts, spitting out waste material for efficient progress. Landscapers, carpenters and …

Lasts up to 50 times longer than a bimetal blade
Outstanding service life thanks to Bosch Carbide Technology
Starlock intake for maximum power transmission and convenient blade change within 3 seconds.
Ideal for cutting metal: for flush cuts such as cutting hardened screws and nails
Cutting tough metal pipes and a variety of hardened metals with an oscillating multi-tool.

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

The Makita MAKBLADE PLUS Circular Table Saw Blades for Wood Cutting are precision-engineered blades designed to deliver exceptional performance and accuracy. Crafted from high-quality materials and featuring advanced tooth geometry, these saw blades ensure clean and precise cuts in various wood materials. With optimized blade thickness and kerf design, the MAKBLADE PLUS Circular Table Saw Blades offer reduced vibration and improved stability, resulting in smoother cutting action and enhanced control. Whether you're crosscutting or ripping, these blades deliver consistent results, even when working with hardwoods and engineered wood products. The innovative design of these saw blades helps minimise …

Wide Range of Applications - The S 922 EF Flexible for Metal Reciprocating Saw Blade is optimised for a wide range of applications in metal. Its fine tooth pitch cuts materials of all common thicknesses. Made of BIM (bi-metal), the blade is engineered for long lifetime when cutting regular-strength steel. Moreover, it is equipped with a fine tooth pitch (1.4 mm) for cutting pipes and profiles with a thickness of 1.5 mm to 4 mm. The blade has a standard length of 150 mm that enables a cutting capacity of up to 100 mm. For use with reciprocating saws with 1/2 inch universal shank systems. Fits all S-shank reciprocating saws. Features and Benefits • Optimised for a Wide Range of Applications …

Lasts up to 50x longer than a Bi-Metal blade in tough materials - What’s even tougher than a Bosch carbide blade? A Bosch carbide blade with reinforced teeth, of course! Sometimes, the abuse endured by a blade in demolition jobs is so great that the teeth get torn off. So Bosch made them even stronger. For the toughest demolition work, Bosch developed the EXPERT ‘Wood with Metal Demolition’. The progressive pitch ensures it isn’t surprised by any thickness changes in material; the individually reinforced tooth shoulders withstand the worst impacts of embedded high strength steel in wood; and it is all backed up by the ability of carbide to tear through anything in its way. When you absolutely have to …

• StarlockMax INTERIOR WORK professional set• Accessory kit containing 45 parts with extensive range of saw blades for fast, precise sawing in all kinds of installation work. Suitable for FEIN MultiTools with StarlockMax mounting and all other common MultiTools with StarlockMax mounting. Available as a set, offering significant savings over purchasing the items individually. Content: 8 E-Cut long-life saw blades (1 set of 34 x 20 mm, 2 each of 50 x 35 mm and 50 x 65 mm, 1 each of 78 x 32 mm, 78 x 42 mm and 90 x 32 mm), E-Cut precision BIM saw blade (1 each of 50 x 35 mm, 50 x 65 mm), 1 HSS circular saw blade (diameter 100 mm), 1 depth stop, 1 rigid stopper knife, long, 1 extraction …

Fast Cuts - The S 922 BF Flexible for Metal Reciprocating Saw Blade is optimised for fast cuts in metal. Its tooth pitch is specially designed for working at high speeds. Made of BIM (bi-metal), the blade is engineered for long lifetime when cutting regular-strength steel. Moreover, it is equipped with a tooth pitch of 1.8 mm for cutting pipes and profiles with a thickness of 2.0 mm to 8 mm. This reciprocating saw blade has a standard length of 150 mm for a cutting capacity of up to 100 mm. For use with reciprocating saws with 1/2 inch universal shank systems. Fits all S-shank reciprocating saws. Features and Benefits • Fast Cuts in Metal Pipes and Profiles with a Small Diameter • …

The Makita MAKBLADE wood cutting circular saw blade is a high-performance blade designed to deliver precise and efficient cuts in a variety of wood materials. Engineered with micro-grain carbide-tipped teeth, the blade offers superior durability and long-lasting sharpness, allowing for clean, splinter-free cuts even with frequent use. The blade's precision-ground teeth provide unmatched cutting performance and a flawless finish. Features and Benefits • Fully hardened and tensioned blades absorb impact and remain flat and true • High grade tungsten carbide with low wear rate for extended blade life • Precision honed tips for a sharper longer lasting edge • Thin kerf for less …

The range of metal cutting blades are optimised for cutting steel, aluminium or stainless steel. Through a proprietary in-house process tooth alignment has reached a level to give a smooth accurate cut, minimising vibration and burring. Features & Benefits • Crafted with 12% titanium carbide, DeWalt Metal Cutting saw blades tackle tough steel cutting applications with ease • Modified ATB tooth geometry provides clean, burr-free cuts, and expansion slots dissipate heat, extending blade life • Tri-foil braze boosts the strength of each tooth tip for extreme durability Specifications • Blade Diameter: 355mm • Teeth Count: 90 • Bore Diameter: 25.4mm • Kerf Thickness: …