Turntable Cartridges

The Audio Technica Angled Headshell features a universal 0.5-inch mount that will enhance the playback quality of your turntable. This headshell has been crafted specifically for use with straight 4-pin tonearms offering a synergy of design and function. Weighing just 8.5 g the ultra-lightweight aluminium die-cast body keeps vibration to a minimum delivering a clean vinyl sound. Built for your convenience the stylish finger lift enables accurate stylus placement so you can switch between songs with ease. It also comes complete with colour-coded lead wires and mounting screws facilitating a hassle-free installation process. Additionally the Audio Technica Angled Headshell is also available in …

The half-inch standard mount 0.3 x 0.7 mil elliptical AT33EV cartridge features a tapered duralumin cantilever. Dual Moving Coil cartridge design increases channel separation and extends the frequency response range delivering extraordinary audio quality. Internally constructed with neodymium magnet for enhanced magnetic energy and PCOCC wire for pure audio transmission.
Suitable for: Turntables
Colour: Gold;Red
Package Contents: Washer;Nut;Brush;Screwdriver;Lead Wire Set;Cartridge Installation Screw;Protector
Material: Synthetic Resin;Duralin;Aluminium
Suitable for Brand: Ordinary Turntable Brands
Voltage: 0.3mV (1kHz and 5cm/sec.)
Application: Hi-Fi
Frequency Range: 15 Hz - 50 kHz
Shape: Elliptical<…

The Audio Technica AT33Mono is made specifically for use on mono systems. It has a horizontal coil and so in principle only generates electricity horizontally. The Audio Technica AT33Mono produces sound to a very high quality because it does not easily pick up unnecessary strain components from distorted or scratched records producing audio that you couldn possibly get from a stereo cartridge.

The Audio Technica AT33PTGII Moving Coil Cartridge utilises a Microlinear stylus creating a quality sound with low distortion. Supported by the 23-degree vertical tracking angle the Microlinear stylus ensures optimal record tracking to capture an audio quality thats as close to the original recording as possible. The advanced tapered boron cantilever offers a reduced coil weight helping to reduce unnecessary vibrations and create a thrilling listening experience. With a dual-moving coil design the AT33PTGII offers a clear distinction between left and right audio channels. This creates a vivid stereo image and extends the frequent response to bring more detail to the sound output. A neodymium …

The Audio Technica AT33SA Moving Coil Cartridge with Shibata Stylus provides a tapered boron cantilever enabling a superior vinyl sound. This cantilever construction coupled with a double damper provides a reduced weight to offer a wide 15 - 50000Hz bandwidth 30dB channel separation and minimised distortion for clear sound reproduction. Mounted onto the cantilever the Shibata stylus utilises its line-contact design to accurately track your records with exceptional precision. The AT33SA also offers a 23-degree vertical tracking angle and a 1.8 to 2.2 g vertical tracking force ensuring a ground-breaking mid/bass sound. For further audio enhancement the AT33SA boasts a supreme neodymium magnet …

The Audio Technica P-Mount Moving Magnet Cartridge with Conical Stylus is great for optimising linear tracking T4P turntables from various brands such as Technics and Hitachi Pioneer. Featuring a distinctive dual moving magnet design this cartridge offers wide channel separation and high level ideal for any vinyl fanatics. The pre-fitted conical bonded stylus combined with a 20-degree vertical tracking angle and 20 to 20000 Hz bandwidth will deliver accurate playback quality that matches the calibre of the original recordings. This p-mount cartridge also boasts a lightweight design that can be easily installed without the need for complex adjustments.

The Audio Technica P-Mount Moving Magnet Cartridge with Elliptical Stylus is great for optimising linear tracking T4P turntables from various brands such as Technics and Hitachi Pioneer. Featuring a distinctive dual moving magnet design this cartridge offers wide channel separation and high level ideal for any vinyl fanatics. This is complemented by a para-toroidal coil construction which guarantees enhanced signal-to-noise ratio minimised distortion and great durability. At the core of this cartridge is the elliptical stylus with a high-quality radius allowing it to ride in the centre of the groove providing greater record tracking than a conical stylus. Partnered with a 20 - 20000 Hz frequency …

An update of the AT-ART7 the AT-ART9XA non-magnetic core MC cartridge features a Shibata stylus on a 0.28 mm diameter solid boron cantilever. The "ART" in the model number stands for Audio-Technica Reference Transducer a designation Audio Technica give only to their flagship phono cartridges. Compared with the magnetic core used in most MC cartridges non-magnetic core cartridges are free from magnetic distortion allowing for natural timbre and a precise sound field. Although conventional non-magnetic cores struggle with output voltage the AT-ART9XA features a newly designed coil armature with an improved output voltage of 0.2 mV (1 kHz 5 cm/sec). The dual moving coils (fashioned from high-performance …

Featuring a special line contact stylus on a 0.28 mm diameter solid boron cantilever the AT-ART9XI replaces the AT-ART9 as Audio-Technicas flagship magnetic core MC cartridge. The "ART" in the model number stands for Audio-Technica Reference Transducer a designation that they give only to their flagship phono cartridges. The specially designed magnetic circuit boasts an output voltage of 0.5 mV (1 kHz 5 cm/sec) making the cartridge easy to use and capable of reproducing even the most delicate expressions while also ensuring dynamic playback. The dual moving coils (fashioned from high-performance PCOCC wire) are aligned in an inverted V shape to provide high separation and wide response for clear …

The Audio Technica 9G Half-Inch Mount Universal Headshell is ideal for vinyl enthusiasts seeking a high-quality sound from their four-pin turntable cartridges. Its universal 0.5-inch mount design facilitates easy installation and great compatibility with various turntable models. The ultra-lightweight aluminium die-cast body weighing a mere 9 grams also effectively minimises vibration to enhance the sound. The addition of a finger lift advances the precision in stylus placement and playback. quality while the integrated gold-plated lead wires offer lossless signal transmission. This will truly optimise the sound of your records. Additionally the 9G Half-Inch headshell comes in both black and …

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Original Colour by Producer: Silver
Made in: China
Colour: Silver

The Audio Technica AT-LH11H an 11-gram headshell is designed with non-threaded through-holes ideally suited for compatibility with a wide range of cartridges. This even includes cartridges with threaded mounting holes from series such as AT-OC9X AT-ART9X and VM95. As the lightest in the LH series the AT-LH11H Headshells reduced mass decreases unwanted vibrations during playback helping to enhance sound clarity and audio retrieval. The hard anodised finish also minimises vibrations as well as prevents distortion from hindering your listening experience. Equipped with oxygen-free copper lead wires the AT-LH11H delivers flawless signal transmission enabling you to fully engage with your records.…

The AT-LH13H is a 13-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable cylinder and comes with installation screws, plastic washers, and a hexagonal wrench.
Package Contents: Plastic Washer;Cartridge Installation Screw;Hexagonal Wrench
Compatible with: VM95 cartridge series;AT-OC9x cartridge series
Variant: 13 g
Weight (g): 13.0
Original Colour by Producer: Black
Suitable for Brand: Audio-Technica
Colour: Black
Made in: China
Material: Aluminium
Type: Headshell
Weight: …

13G TECHNIHARD™ adjustable headshell with AT6101 quad wire. Specifications: Adjustable overhang and adjustable azimuth (tilt), Threaded headshell avoiding in use of nuts when fitting cartridge, 7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm), 1 hexagon wrench (for overhanging and tilt adjustment).
Made in: China

The AT-LH15H is a 15-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium headshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. The cartridge is also available in 13-gram (AT-LH13H) and 18-gram (AT-LH18H) models for optimal compatibility with your cartridge/tonearm requirements. 

TechniHard adjustable headshell with AT6101 quad wire. The AT-LH13/OCC has an adjustable overhang and adjustable azimuth, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Made in: China
Colour: Silver

The AT-LH18H is a 18-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium headshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. 

The Audio Technica AT-LH18/OCC Technihard 18g Headshell is tailor-made for audiophiles seeking precise hassle-free cartridge adjustments. This headshell weighing in at 18g allows for the meticulous alteration of cell advance and azimuth (tilt) to achieve optimal sound quality. Thanks to the adjustable overhand feature the AT-LH18/OCC offers accurate cartridge alignment to achieve superb record tracking. The four high-purity oxygen-free PCOCC AT6101 lead wires each containing 22 strands of 0.12mm help to reduce signal degradation to amplify the audio performance. The 24K gold-plated terminals are also on hand to enable seamless signal transmission. Moreover with its TechniHard design this headshell …

Adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Colour: Black
Made in: China