Utility Knives

Bahco Lindstrom 7190 Supreme Diagonal Cutting Nipper 109mm

Facom 192.AVSE VSE series 1000 volt insulated diagonal cutting pliers for hard wire. Compliant with the following standards : NF ISO 5749, NF EN 60900, ISO 5749, EN 60900, DIN ISO 5749, DIN EN 60900, more→ASME B107.500. Specifiations • Overall Length: 180mm Features and Benefits • Tempered cutting edges for hardness above 60 HRc • Insulation with "safety" colour coding • Burnished head

from £67.32 up to £70.95

Bahco Lindstrom 8150 Diagonal Cutting Micro Bevel Cut Nipper 112.5Mm LIN8150

The Lindstrom Supreme Oblique Cutting Nipper produced from high performance tool steel. It has a screw joint that minimises friction and alignment of cutting edges. The edges are precision induction h more→ardened to 58-60 HRC. The handles with return spring and sleeved.Length (A): 109mm (4.29 in). Blade length (B): 9mm (0.35 in). Head width (C): 9mm (0.35 in). Head depth (D): 6mm (0.24 in). Tip width: (F): 1.0mm (0.04 in). Cutting capacity: 0.2-1.25mm. Head type: TaperedCutting edge: Micro-bevel. The tapered head is the smallest of the standard cutting heads available. Not only does it taper on both sides, but also the underside is cut away, allowing the operater to gain access into some difficult …

from £61.99 up to £74.95

FACOM 192 VSE Series Insulated Heavy Duty Side Cutters 145mm 192.14AVSE

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled mach more→ine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 112mm (4.…

from £69.95

FACOM 192 VSE Series Insulated Heavy Duty Side Cutters 160mm 192.16AVSE

Facom 192.AVSE VSE series 1000 volt insulated diagonal cutting pliers for hard wire. Compliant with the following standards : NF ISO 5749, NF EN 60900, ISO 5749, EN 60900, DIN ISO 5749, DIN EN 60900, more→ASME B107.500. Specifiations • Overall Length: 145mm Features and Benefits • Tempered cutting edges for hardness above 60 HRc • Insulation with "safety" colour coding • Burnished head

from £67.95

Bahco Lindstrom 8160 Diagonal Cutting Micro Bevel Cut Nipper 125Mm LIN8160

Facom 192.AVSE VSE series 1000 volt insulated diagonal cutting pliers for hard wire. Compliant with the following standards : NF ISO 5749, NF EN 60900, ISO 5749, EN 60900, DIN ISO 5749, DIN EN 60900, more→ASME B107.500. Specifiations • Overall Length: 160mm Features and Benefits • Tempered cutting edges for hardness above 60 HRc • Insulation with "safety" colour coding • Burnished head

from £67.46 up to £71.95

Lindstrom 8142 Diagonal Cutting Ultra Flush Cut Nipper 110Mm LIN8142

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled mach more→ine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 125mm (5 …

from £63.62 up to £1,513.06

FACOM Axial Cut Side Cutters 120mm 405.12

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled mach more→ine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 110 mm (4.…

from £59.95

Lindstrom 8141 Diagonal Cutting Flush Cut Nipper 110Mm LIN8141

Compliant with the following standards : NF ISO 9654, ISO 9654, DIN ISO 9654, ASME B107.500. Specifications • Jaw width: 16mm • Overall length: 120mm • Weight: 95g Features and Benefit more→s • Axial cut • Matt burnished finish

from £57.05 up to £355.65

KNIPEX 70 70 VDE Insulated Diagonal Side Cutting Pliers 180mm 70 07 180

These Lindstrom Diagonal cutting nippers have an oval head. They are produced from high performance ball bearing steel which is black oxidised for increased durability. The numerically controlled mach more→ine grinding guarantees edge and angle accuracy and contact which increases tool reliability and consistency. The edges are precision induction hardened to 63-65 HRC. The handles have a return spring and are sleeved. Ideal for wire harness work and standard printed circuit board assembly. Oval heads are the most common type of nipper head. It combines strength and durability can withstand and distribute the impact of cutting and is utilised in a myriad of applications.Length (A): 110mm (4.…

from £52.95

CK Tools Ck S/Plus ESD S/Cutter FF 115mm

70 07 180 Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean more→cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. with bevel. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 3.0 mmCutting capacities hard wire (diameter): Ø 2.5 mmVDE tested: yes

49.99Buy!
£

Zoro.co.uk

Delivery: in United Kingdom

Report

S/Plus ESD S/Cutter FF 115mm by Ck

CK Tools CK RedLine Combi Cutter 3 Max 180mm T39071-3180

from £49.99

KNIPEX X-cut Compact Diagonal Cutter 160 Mm 7306160

• Patress screw shear for damage free cutting of 3.5mm patress screws & 4mm conduit cover screws • Wire stripping notches for effortless & damage free stripping of 1.5 & 2.5mm² wire • W more→ire bending anvil for quick & damage free doubling back of copper wire • Two component, ergonomic design, with anti-slip horns for increased comfort, control & safety • Induction hardened jaws for outstanding long term performance • Cutting jaws with C.K optimised geometry for unsurpassed cutting performance • Special alloy steel, drop forged, hardened & tempered for exceptional strength & durability • VDE approved • individually tested to 10,000V for safe live working u…

from £41.99 up to £49.95

CK Tools CK RedLine VDE CombiCutter3 160mm 431008

FEATURES:- Compact and weight-saving design- Suitable for hard, permanent use- Optimum transmission ratio ensures high cutting performance with low power input- Precise cut even with fine copper wires

49.24Buy!
£

ExpertElectrical.co.uk

Delivery: in United Kingdom

Report

CK RedLine VDE CombiCutter3 160mm

KNIPEX 70 70 VDE Insulated Diagonal Side Cutting Pliers 160mm 70 07 160

from £48.95 up to £114.23

Bahco 2101S-200 2101S Insulated Side Cutting 200Mm BAH2101S200

70 07 160 Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean more→cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. with elongated cutting edge. with bevel. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 3.0 mmCutting capacities hard wire (diameter): Ø 2 mmVDE tested: yes

from £47.95 up to £49.22

CK Tools CK RedLine VDE Side Cutters With Wire Stripping Notche 160mm 431019

Bahco Insulated side cutting pliers have progressive edges the cutting radius progresses along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper more→and plastic insulated wire at the tip. Has a screw joint that provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced giving greater leverage and increased cutting capacity. Have a black anti-corrosion treated finish made from high performance alloy steel and have plastic injected handles. Induction hardened cutting edges and round shaped jaws give improved accessibility in confined spaces. Conform …

46.03Buy!
£

ExpertElectrical.co.uk

Delivery: in United Kingdom

Report

CK RedLine VDE Side Cutters With Wire Stripping Notche 160mm

KNIPEX Vde High Leverage Diagonal Cutter 180Mm, Multi KPX7406180

from £41.36 up to £48.99

Compare prices₇→

The 74 06 Series High Leverage Diagonal Cutters with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. With an integrated forged axle more→for cutting all types of wire including piano wire. Made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. Precision cutting edges additionally induction-hardened, approx. 64 HRC. Cutting Capacity (mm):74 06 160: Medium: 3.4, Hard: 2.5, Piano: 2.074 06 180: Medium: 3.8, Hard: 2.7, Piano: 2.274 06 200: Medium: 4.2, Hard: 3.0, Piano: 2.5 Features: Made from oil-hardened vanadium electric steel VDE tested up to 10,000V and safe for work up to 1,000V Conform to DIN …

Bahco 21HDG-200 21Hdg-200 Ergo™ Side Cutting Heavy-Duty Pliers 200Mm BAH21HDG200 (8In)

from £45.41 up to £79.45

Bahco 2101S-180 2101S Insulated Side Cutting 180Mm BAH2101S180

The Bahco ERGO™ Side Cutting Heavy-Duty Pliers are made from high performance steel with a black anti-corrosion finish and their edges are induction hardened at 62 HRC. They are designed to out more→live more than 50 000 cuts of hard wire. The pliers have two component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allows the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges. The heavy-duty cutting edge provides a sturdy cut …

from £21.99 up to £44.95

KNIPEX 74 06 VDE Insulated High Leverage Diagonal Cutting Pliers 200mm 74 06 200 SB

Bahco Insulated side cutting pliers have progressive edges the cutting radius progresses along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper more→and plastic insulated wire at the tip. Has a screw joint that provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced giving greater leverage and increased cutting capacity. Have a black anti-corrosion treated finish made from high performance alloy steel and have plastic injected handles. Induction hardened cutting edges and round shaped jaws give improved accessibility in confined spaces. Conform …

from £44.95

KNIPEX 72 11 Diagonal Flush Cutter for Plastics 160mm 72 11 160

74 06 200 SB High Leverage Diagonal CutterFor very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Pre more→cision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 4.2 mmCutting capacities hard wire (diameter): Ø 3.0 mmCutting capacities piano wire (diameter): Ø 2.5 mmVDE tested: yes

from £43.95