Steadicams (Hand Stabilisers)

Articulated arm with double ball heads with 1/4 screws for a cage with a monitor.The screws are 1/4 and the monitor once assembled can be adjusted in different positions or angles.Possibility of directly blocking double bearing with a single butterfly nut.

Specifications:- SmallRig 2100. Product type: Monitor mount, Product colour: Black, Material: Aluminium. Width: 48 mm, Depth: 49.6 mm, Height: 39 mm. Number of products included: 1 pc(s), Package width: 76 mm, Package depth: 63 mm

SmallRig Tilt Monitor Mount 1842 is designed to hold your monitor onto a camera cage, handle, or other mounting systems via two 1/4-20 screws. The aluminum mount enables to tilt 180° without using tools and free-stop in any position. It can support 5 or 7 monitor up to 1.5kg. Featuring rubber pad on top to prevent your monitor from scratching. The thumbscrew features slots for hex spanner to lock it tight and ensure your monitor safe. You can adjust the tightness of the monitor mount by adjusting the M4 screws on each side based on your needs. SmallRig Tilt Monitor Mount 1842Key Features:- Supports 5 or 7 Monitor up to 1.5kg.- Tilts 180° & Lockable in Any Position.- Includes Allen Wrench to Se…

This shoulder rig kit is compatible with both big and small cameras. The Z-shape offset raiser bridges the camera and the Shoulder Pad 2077, extending the shoulder rig to the right for more comfortable shooting. On the shoulder pad there are multiple 1/4''-20, 3/8''-16 threaded holes and Arri locating holes for camera accessories. This kit extends the application of a 15mm rod rail system while optimizing run-and-gun shoulder balance.Key Features:- Compatible with both big and small cameras.- Multiple 1/4''-20, 3/8''-16 threaded holes and Arri locating holes for accessories.- Extending the shoulder rig to the right for balance.- Easy to install and disassemble.Specifications:Compatibility: - …

SmallRig Handgrip for Zhiyun WEEBILL LAB and DSLR Camera 2276 is designed to hold your gimbal to enter a handy underslung position and provide multiple mounting points for accessories. The handle is attached to WEEBILL LAB via a 1/4 thumbscrew and two locating pins which correspond with the holes on WEEBILL LAB to prevent twisting. It also designed as a universal handle for all handheld gimbals and DSLR cameras with 1/4-20 threaded holes on the bottom. It features 1/4-20, 3/8-16 and Arri locating hole on the top or side for monitor and microphone. The handle comes with a cold shoe on the top as well as allows for mounting a microphone or SmallHD Monitor Tilt Arm directly. The quick-release handle …

SmallRig Wooden NATO Side Handle 2187 is designed to provide a comfortable handheld shooting for cameramen. It is locked via NATO clamp to make your setup quick release and fits any cage featuring NATO rail on the side. A built-in hex on the top to adjust the handle up and down based on your needs. If you want to use it on the other side of the cage, use the hex to take off the connection metal part of the handle and change the direction. The quick release handle features a cold shoe and 1/4-20 & 3/8-16 threaded holes on top which allow you to mount other accessories.Features:- Fits any cage featuring Nato Rail on each side.- Quick-Release your setup without using tools.- Mounting holes & cold …

Rotating handle that screws to a complete cage or a Smallrig cage L by 1/4 screws.Its wooden handle is designed for skill and can rotate in 360º.

SmallRig Right-Side Wooden Grip with ARRI Rosette 1941 is designed to mounts onto any camera rig via ARRI-standard rosette with a range of 360° adjustable. The handle could be installed on the right side of camera cage, plate and ARRI rosette arm for increasing stabilization, it also works well with camcorders such as RED, URSA Mini, Sony FS7 etc. The ARRI rosette is up and down adjustable via detaching the two M4 screws. Featuring a hex spanner on the bottom allows for height adjusting and reinforcing the thumbscrew, also helps to detach the handle in seconds. The center M6 screw could be removed for use with a rig requiring a female thread. The integrated material of wooden and aluminum reduce t…

SmallRig QR Cheese Handle 1720 is a quick release top handle that attaches and detaches with a wingnut screw.Slide it onto the Safety Rail and tighten down the wingnut, you can lock it in place.E*cept for sliding it left and right on the Rail to keep your camera balance, you can also slide forward and backward to find the balance point of your rig.This handle has multiple functions.The side 15mm opening allows to mount a 15mm rod so that you can attach your follow focus, etc. The 15mm rod clamp allows for the attachment of EVF mount or microphone shock mount, etc. An integrated shoe mount on the top for attaching on camera lights, microphone shock mounts and more.Another integrated shoe mount …

This Top Handle allows different mounting options for cinematic cameras. It is ergonomically shaped for a comfortable shooting experience and a fast accessible hex spanner tool is integrated to the side. Furthermore the Arri Lock on the front of the handle offers the opportunity to mount different types of monitors and other additional gear closely to the camera.The grip is threaded with 1/4´´ and 3/8´´ wholes. Its size fits perfectly for small and mid sized rig in order to keep the setup compact for Run & Gun shootings. It also can be used while operating with steadycams and gimbals.Features:- Multiple 1/4´´ and 3/8´´ threaded wholes + Arri locating holes for anti twist.- Rock solid, light w…