Diamond Core Bits & Milling Cutters

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 16 mm • Arbor Part Number: P-35156 / P-35178 • Pack Quantity: 1

This Makita Ezychange Hole Saw is equipped with quick release pilot drill and core body. This not only allows speedy size changes but is also a safer method for the user. Manufactured from HSS Bi-Meta more→l with 8% cobalt and progressive tooth geometry, ensures long service life and high cutting speeds suitable for ferrous and non ferrous metal, stainless steel, Aluminium, wood and plastics. Ezychange hole saws can be purchased individually or as a kit designed with the right sizes to suit your trade. Compatible with other major manufacturers quick change holesaws. Specifications • Diameter: 17mm • Working Length: 44mm Features & Benefits • Allows speedy size changes • Core body …

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Imperial: 7/64 • Bearing Dia Metric: 6.3 • Bearing Dia Imperial: 1/4 • Sawbore: 3.2 • Sawbore Imperial: 1/8

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating, ventilatio more→n, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

Durable in Sheet Metal - The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has more→less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. It is suitable for use with all corded and …

Made from premium high-speed steel (HSS), this countersink delivers exceptional cutting performance and long-lasting sharpness. Featuring a 3-flute design, the Dormer G106 ensures smooth, chatter-free more→operation, providing a clean and accurate 90° countersink on various materials, including steel, aluminium, wood, and plastics. The 3-flute configuration enhances chip removal, reducing clogging and increasing efficiency for faster and more precise work. The 90° angle of the countersink is ideal for creating countersunk holes for flat-head screws, ensuring a flush finish for a professional appearance. The durable construction of the Dormer G106 guarantees reliable performance even under …

Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a more→8% cobalt content for increased heat and wear resisitance for greater product life. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Cutting Depth: 38mm Features: Variable pitch with HSS teeth Ideal for cutting wood, chipboard, plywood, plastics, plasterboard & non-ferrous metal Ideal for cutting wood, chipboard, plywood, …

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic t more→ools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 35 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 17 mm • Arbor Part Number: P-35156 / P-35178 • Pack Quantity: 1

Smooth Cutting - The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made o more→f bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Fits threaded standard adapter. Features and Benefits • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding …

Bahco 1130 Arbor 7/16in is suitable for 14-30mm holesaws and is for use with handheld machines. All arbors are hardened for maximum strength. The 3834 Series Arbors are available in a range of sizes s more→uitable for different chuck capacities. Shank size: 11.1mm.This Arbor has the following specification:Size: 14-30mmShank: 11.1mmAdditional Information:• Accessory Type: Arbor

HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 8.0mm • Shank Diameter: 6mm • Overall Length: 50mm • Capacity: 2.0mm - 8.0mm Features and Benefits • P more→roduces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

Bosch 2609390588 HSS-G Standard Hole Saw Arbour with 9.5mm Hex Shank 14-30mm The Bosch 2609390588 Hexagon Adaptor is designed for use with Standard Hole Saws with diameter 14-30mm. It connects the hol more→e saw to the power tool with a mandrel and is suitable for use with all corded and cordless drill drivers. Features:
- Hexagon Adapter connects the hole saw to the power tool
- Suitable for use with all corded and cordless drill drivers
- HSS-G is strong, durable and long lasting Specification:
- Fits Hole Saws: 14-30mm
- Shank Size: 9.5mm
- Shank Type: Hex

Bahco Sandflex® Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneu more→matic tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.Size: 40mm.Additional Information:• Size (mm): 40• Material: Bi-Metal• Pitch: Variable

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 22 mm • Arbor Part Number: P-35156 / P-35178 • Pack Quantity: 1

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 20 mm • Arbor Part Number: P-35156 / P-35178 • Pack Quantity: 1

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

The Bi-Metal holesaw range have a vari-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Also available in plumbers and electricians kits with the m more→ost popular sizes. Arbors available with hex (3 jaw chuck) and SDS Plus shanks. Ideal for trunking, conduit, pipe, kitchen & bathroom installations, hardwood, softwood, mild Steel, aluminium & PVC. Specifications • Bi-metal holesaws with variable tooth pitch • Recommended for cutting steel, aluminium, copper, brass, wood and plastic • Arbors available with hex (3 jaw chuck) and SDS Plus shanks Specifications • Diameter: 68 mm • Arbor Part Number: D-17186 / D-17619 • …

Bahco Sandflex Variable Pitch Holesaw made for high precision cutting of holes from 14mm to 152mm diameter in all sawable materials up to 29mm thick. Suitable for use in portable electric or pneumatic more→tools, and in a wide variety of drilling, boring, milling and other machine tools. Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength. All saws have varipitch (4-6tpi) blades. Supplied in cardboard box.

Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverpla more→te. Cover plates can be removed to allow plugs to pass through. Size: 60 mm Colour: Light grey

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventila more→tion, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

One flute straight cutter from the Dolls house cutter set. D: 2 mm C: 5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 2 Cut Length Metric: 5

The Bluespot Multi Holesaw Set is suitable for wood, thin alloys and thin sheet metal. Supplied in a handy storage case. Contains