Diamond Core Bits & Milling Cutters

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 6 • Bearing Dia Metric: 19 • Sawbore: 8

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increa more→sed cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications • Cut Length Metric: 8 • Bear more→ing Dia Metric: 38 • Sawbore: 12

Spare ball bearings for cutters. Specifications • Bearing Dia Metric: 19 • Bearing Dia Imperial: 3/4 • Sawbore: 4.75 • Sawbore Imperial: 3/16

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 5.9 • Bearing Dia Metric: 20 • Bearing Dia Imperial: 25/32 • Sawbore: 6.35 • Sawbore Imperial: 1/4

The HSS Countersink Bit, Cylindrical Shank performs smooth countersinking for screws and deburring of holes in soft materials. The ground countersink is made of HSS (high-speed steel) that offers an o more→ptimum surface quality for even work in pliable surfaces. Excellent results in soft materials are made possible by five 90-degree cutting edges that continuously work free of chattering and without leaving burrs. It is suitable for use on wood, plastics and non-ferrous metals and has a cylindrical shank system. Cylindrical shank compatible with three-jaw drill chucks. Features and Benefits • Smooth Countersinking in Soft Materials Specifications Diameter: 10,0mm Step height: M 5 Total length: …

The Bi-Metal holesaw range have a vari-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Also available in plumbers and electricians kits with the m more→ost popular sizes. Arbors available with hex (3 jaw chuck) and SDS Plus shanks. Ideal for trunking, conduit, pipe, kitchen & bathroom installations, hardwood, softwood, mild Steel, aluminium & PVC. Specifications • Bi-metal holesaws with variable tooth pitch • Recommended for cutting steel, aluminium, copper, brass, wood and plastic • Arbors available with hex (3 jaw chuck) and SDS Plus shanks Specifications • Diameter: 108 mm • Arbor Part Number: D-17186 • Pack Quantity: …

The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank Size. 11.1 mm The design of the 11152 arbor makes it suitable for 32-210 mm holesaws, it elimina more→tes play and increases the strength of the holesaw by redistributing the load from the thread to the solid cap. These are to be used with handheld machines and, when operating with high workload, in static machines.All arbors are hardened for maximum strength. The 11152 arbors have drive pins to transfer large cutting force from the holesaw to the power unit. QC arbors have a quick change mechanism and tools are not required to change holesaws.Additional Information:• Accessory Type: Arbor

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or more→UNIBASE Sub-base. Specifications • Dia Metric: 15.8 • Dia Imperial: 5/8 • Dia2 Metric: 14 • Cut Length Metric: 6 Features and Benefits • Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 55

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 6 • Bearing Dia Metric: 18 • Sawbore: 8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 5.9 • Bearing Dia Metric: 23 • Bearing Dia Imperial: 29/32 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Suitable for 32-152 mm holesaws. For use with handheld machines. Shank size: 8.5 mm. All arbors are hardened for maximum strength.Quick change arbors have a quick change mechanism and do not need tool more→s to change the holesaws. This Arbor has the following specification:Size: 32-152mmShank: 8.5mmAdditional Information:• Accessory Type: Arbor

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Bearing Dia Metric: 28.6 • Bearing Dia Imperial: 1 1/8 • Sawbore: 12.7 • Sawbore Imperial: 1/2

1/4" Rounding 38 x 14mm Radius TCT Router Bit1 x TCT Router Bit, 1/4" Rounding, 38 x 14mm Radius

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 5 • Bearing Dia Metric: 16 • Sawbore: 8

Guide bush for use with the DeWalt DW625 plunge router and other compatible machines. Specifications • Diameter: 30mm

Smooth Cutting - The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made o more→f bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Fits threaded standard adapter. Features and Benefits • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding …

Constructed of hardened heat and abrasion resisting high speed steel teeth. With a tough alloy body and cap, giving exceptional strength, durability and shatter resistance. Designed for use with batte more→ry operated power tools, our Bi-Metal Cordless Smooth Cut hole saws will cut twice as many holes as the equivalent standard hole saw per battery charge. The complete hole saw assembly includes arbor and pilot drill. Its flared base cap limits cutting depth to ½”.Teeth per Inch (25mm): 8Teeth Type: HSSBody Material: SteelCountry of Origin: CN Specifications Diameter metric: 27mm Diameter imperial: 1,1/16" Cutting Depth metric: 13mm Cutting Depth imperial: 1/2"

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features and Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 54 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Quick-Hitch arbors with high speed steel (HSS), HSS extended length or carbide tipped pilot drills feature two locating pins inserted into the hole saw cap to prevent the hole saw overtightening on th more→e screw thread. This allows easy and instant hole saw changes, without tools and without removing the arbor from the chuck. • For use with hole saws ranging from 32-210mm • Permit instant change of hole saws without tools or removing the arbor from the chuckCountry of Origin: CN Specifications Arbor Shank Sizes metric: 11 hex (excluding SDS-Plus Arbors)mm Arbor Shank Sizes imperial: 7/16 hex (excluding SDS-Plus Arbors)" Body Material: Steel Colour: Black and Grey Fits Hole Saw (DCH and TCT Mult…

2x Longer Lifetime - The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, more→it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. Features and Benefits • Long Life • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 8 mm • Dia Metric: 7.9 • Dia Imperial: 5/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 62.5

The Faithfull High Speed Steel Rosehead 90° included angle countersink. For countersinking screw holes for flush fitting of screw heads in mild steel, plastics and non-ferrous metals. Also suitabl more→e for working in wood, plywood, MDF and other man made boards. Can be used in both hand tools and power drills.Type: RoseheadSize: 16mm (5/8in)Length: 55mm (2.1/4in)Shank diameter: 9.4mm (3/8in)Additional Information:• Countersink Type: Countersink• Size (mm): 16