Diving Accessories

Filling Valve For Scuba Compressor, Available In Int And Din Version.Made In Ce, En250 Certified.

Features:Pegasus full-face mask protects divers from extreme cold or grimy water. The 3-end strap secures the mask evenly and helps creating positive seal.

First Stage Quick DisconnectQuick and convenient way to change hose lengths between divesInstalls between 1st stage and LP regulator hoseLock-down screw to prevent accidental disconnectionFlow rate = 800 lpmLow-pressure use only – below 200 psiFirst Stage Quick Disconnect – Male OnlyInstall on multiple LP regulator hoses for quick swaps

VALVES AND MANIFOLDS.DIN Valve RIGHT expandable US NPSM 3/4 ´´, without INT Plug, 230 bar, incl.rubber knob.DIN Valve RIGHT expandable US NPSM 3/4 ´´, without INT Plug, 230 bar, incl.rubber knob.

Accessories Snap Hooks And Extenders Kit X 10 Steel Carabiner Mini 6,2Cm.

Bcd jackets - Components.OMS CR Webbing For Dir Harness Without Hardware And Crotch-Strap Vest.Cr webbing for dir harness, without hardware and crotch-strap.

Regulators - Regulators 1st stage.TECNOMAR Argon 1st Stage Regulator With Overpressure Valve.Argon with overpressure valve, regulator 1st stage.1st Stage Argon with two LP ports, one of them with overpressure valve.

Filling Valve For Scuba Compressor, Available In Int And Din Version.Made In Ce, En250 Certified.

Bcd jackets - Components.OMS Peformance Mono Internal Bladder 27 Lbs >2015.Peformance mono internal bladder (27 lb.) Specifications:- weight:0.24 kg.

Wrist diving compass designed for front and side reading, built with scratch-resistant polycarbonate protection. Soft ergonomic strap made of high resistance technopolymer. Features:- Oil-bath- Lateral reading window- Wrist console.

Second stage for SEAC PX OCTO emergency regulator.Possibility to adjust the Venturi effect (Dive / Pre Dive) with a simple switch.Made in Italy.

Second stage is a simple and functional design.Its large diaphragm always ensures natural breathing.and is possible to adjust the Venturi effect (Dive / Pre Dive) with a simple switch.Made in Italy.

Techincal Scuba Diving Oval Inflator Assembly System come with 16(L) Oval shape corrugated hose, K-shape power inflator and plain elbow (non-exhaust elbow).This inflator system is made of durable impact resistant plastic and rubber corrugated hose.The internal components of the power inflator and inlet quick-disconnect nipple are made from marine chrome plated brass.Our inflator assembly is fit for the technical wings (air cells) which using the thread size (inner diameter) of elbow collar is 46mm.

Low pressure hose that fits the Jetstream and Xstream Mk3 regulators. NOTE! Please verify if this LP hose is to be used, the first stage must have an over pressure valve.

Made from 2mm titanium so ultra light and tough.3 weight spine plate.Can be attached to the spine of the harness and can take most sizes and shapes of weights with velcro attachment.

Surface Pressure Gauge 350 Bar G5/8.

Filling hose for compressed air tanks.It has 1/4´´ BSP threaded carbon steel nuts mounted on both ends.Available in various lengths.

Drysuit weight belt whit quick release system for weights.

Our 100% O2 hose are CE marked and CSA approved.All hose assemblies are tested and cleaned before shipment.Hoses with regulator thread, 3/8´´ UNF male and 9/16´´ UNF swivel female.

Dive tanks - Compressors.METALSUB Filling Hose For LW Compressor Stainless Steel.Filling hose for lw compressor with ss fittings.

Dive tanks - Compressors.COLTRI Filling Hose For Compressor/Panel.Filling hose for compressor/panel.

Alert Marker 120cm PRO SMALL OPV PINKCan be inflated via BCD-Adapter, equipped with over pressure valve. Inline inlet valve! Stainless steel D-ring! Special OPV for smaller rolled-up size

Specifications:- Weight: 0.01 Kg

The SPG 52 MM or SPG 60 MM is the perfect pressure gauge for any dive.Choose from 360 Bar or 5.500 PSI.The tempered mineral glass, nearly scratch resistant, extends the life of your pressure gauge.The durable brass nickel plated body can be used with our without a boot.Highly visible phosphorescent bezel allows for easy pressure reading in any environment.And comes with a double ended o ring air spool for swivel hose installation.Specifications:The SPG 52 MM or SPG 60 MM.-Tempered Glass mineral lens comes in 52 mm or 60 mm width.-Available in 360 Bar or 5.500 PSI.-Colored pressure indicator red 0-50 Bar and black 50-360 Bar for easy reference.-Durable brass nickel plated construction.-The gauge …