Diving Accessories

Regulators - Hoses.DE PROFUNDIS Din 1m.Decanting hose.Usable up to 300bar, without gauge, 1m long.

Regulators - Accessories.DE PROFUNDIS Cristoltube MCG 111 Oxygen Grease.Cristoltube mcg 111 oxygen grease.

A fully balanced regulator at an entry level price. Warm water use only (above 10C / 50F).Features:- 1 HP port and 4 MP ports are available.- Available in DIN and yoke.- Pneumatically-balanced second stage results in smooth, easy breathing.- The integrated venturi control provides a performance boost at depth while preventing unwanted freeflow at the surface.- The Comfo-bite™ mouthpiece virtually eliminates jaw-fatigue.

The BDK 50 mm Stainless Steel D-Ring 4kg weight pocket in black is an essential accessory for BCD jackets used by divers. This weight pocket is designed to securely hold up to 4kg of weight, allowing divers to adjust their buoyancy underwater with ease. The durable stainless steel D-ring provides a reliable attachment point for the weight pocket, ensuring that it stays in place during dives. The sleek black color adds a stylish touch to your diving gear, while the 50mm size makes it compatible with a wide range of BCD jackets. Whether you're a beginner or experienced diver, the BDK weight pocket is a practical and convenient addition to your diving equipment.

Compliment your Calypso and Titan regulators with this reliable, easy breathing octopus. Features: - Mid-size, high performance octopus to compliment the Titan and Calypso regulators- High visibility 39?yellow hose and high visibility yellow cover makes it easy to locate in an emergency- The venturi lever prevents unwanted freeflow when not in use- Easy purge front cover

HUGE, 7ft long (210cm) x 22ft (55cm) circumference (6ft (180cm) out of the water).Mil-Spec, urethane-backed, nylon material.SOLAS reflective tape on both sides for maximum visibility.Elastic loop at top for chem light attachment.SS D-ring at top for slate attachment.Overpressure relief valve with pull for manual release.One way oral inflation valve w- cap cover.Anti-Spill bottom with baffle to allow easy fill from any device and remains inflated until you empty it.Rolls up to compact size and stays closed with velcro strap.Lifting strap with stainless steel D-ring at bottom.50 lbs.of lift capacity.

Specifications:- Especially conceived for Blue Water Hunting! Extremely resistant and with an outstanding floating capacity!- In Hypalon (material used for the construction of Rigid Inflatable Boats) , it can be filled with more than 1 Bar of air pressure.- 2 Heavy duty Stainless steel D-Ring's especially located underneath the float and backed, to avoid the sinking when pulled and also force the fish to run away horizontally and not straight to the bottom!

The deluxe harness gives the diver a more comfortable set up than the basic harness. It comes with anatomically shaped shoulder padding and in 2011, waist cushions are added to soften the burden brought on by the heavy cylinder(s). An extra set of pre-fixed chest D-rings provide additional attachment points for extra gear.Features:- 5cm (2) wide, 2.5mm thick nylon webbing- Anatomic shoulder pads and waist cushions- Overall length: 320cm- Complete HB2 set include: 1 nylon connecting webbing, shoulder pads (with 4 bent D-rings (DR1) + 8 keepers (WK4), 2 waist straps with & quick-release buckles, 4 * strap keepers (WK4), 2 flat D-rings (DR2) and 1 stainless belt buckle.Whats in the box:- DR1: TIG …

The gauges come in two different colors, the traditional yellow dial and the new with a black dial. Both versions come with either bar or psi and they are also available as double console with a depth meter.TECHNICAL FEATURES:Cirrus Pressure Gauge with Hose:- This 300 bar (4350 psi) pressure gauge is a small model that will not be in the way during the dive. Made of robust metal and packed with Poseidon’s 300 bar kevlar reinforced hose. Also available with PSI scale.Pressure Gauge in Black:- Our pressure gauge in a new design, with black display and fluorescent numbers. Pressure gauge shows both BAR and PSI. Delivered with a 80 cm HP hose.Double Console in Black- Our double console in a

Mono 3/4 gas outlet double faucet.

Bcd Jackets Accessories And Parts Kit X 10 D-Ring Steel Sliding.

Spg With Graduation Range 0-360 Bar, 0-5000 Psi- Single Reading- Tempered Glass- Luminescent Glow In The Dark Screen- Air Or 100% Oxy (Oxy Clean)- Certified According To En 250- Double Chrome, Mirror-Plated Case Treatment- Brass Housing With Tempered Glass For Extreme Durability- Copper Beryllium Bourdon Tube Mechanism That Never Goes Out Of Calibration Even With Hard Knocks- Preferred For Its Simplicity By Many Technical Divers Who Follow Dir Training Philosophy

Small punctures or holes? Bumping into things under the water or getting it caught on something top side happens. Save yourself time and money, no need try and do a temporary fix. Just replace the inner bladder and it is as good as new. These bladders are for wings made prior to 2015.

COMPACT 2 400 bar console.DimensionsConsole: 6 cm width x 11 cm height x 2 cm lengthHose (included): 75 cm length

Bcd jackets - Components.OMS Internal Bladder For BC117-45 45 Lbs

Flex hose double braiding with Rayon designed to outperform and outlive traditional rubber hoses. This hoses are 30% lighter than an equivalent length rubber hose and have unmatched flexibility. You can tie a Flex hose in a knot and be assured of continuous, uninterrupted airflow.

OMS Stainless Steel backplate truly shines thanks to our superior de-burring process which eliminates backplate sharp edges, and prevents abrasion and cuts to webbing and BC´s.

Adding ballast weight to the Nomad XT sidemount system is made easy with the Nomad XT Weight Plate.Contoured to match the soft backplate of a Nomad, the weight plate attaches to the back of the Nomad using the existing grommet holes in the backplate with two included stainless steel assembly screws.The Nomad Weight Plate can hold up to 16 lbs (7.25 kg) total weight capacity in four separate pockets.Each individual pocket is secured by a double Velcro seal that will hold weights firmly in place.Three marine grade stainless steel grommets on the weight plate give the option of mounting the plate with the pockets facing toward or away from the harness.The SuperFabric outer covering of the weight …

Accessories Snap Hooks And Extenders Kit X 10 Double Steel Carabiner Large 12Cm.

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun.

Salvage divers, underwater archaeologists or anyone who needs to recover a heavy underwater object will appreciate the design of our lift bag. Its trapezoidal shape means more air at the top, creating a shorter, lower profile bag that is ideal for inflation inside tight spaces. Intended for lifting heavy objects, our Lift Bag contains an internal dump valve with pull cord that is used by the diver ascending with the bag to control ascent rate. Open design means air will vent out the bottom in case of a rapid ascent. Self-storage pocket makes stowing and carrying the bag a cinch. Available in ANSI safety orange 35 lb.Features:- RF welded seams- Marine-grade stainless steel grommetsSpecifications:- …

Compressor hose with filling valve, working pressure 350 BAR.With 1/4 ´´BSP female to connect directly to the compressor or to a charging panel.

Constructed of high pressure 5000 psi (350 bar) hose and made to equalize or fill one tank from another. Set up to equalize from the tank with highest pressure to the tank with the lowest pressure. Comes with bleeder valve to safely detach and ready to help make your scuba diving safe and fun.

Easy Mounting of the Pony Cylinder:- Mount on the diver's right or left side- Mount upright or upside-down- Secure and stable attachment- Easy attachment with stainless steel cam buckle- No hose clampsEasy Attachment to the Primary Cylinder:- Uses your BC cam strap for attachment- Rubber bumpers to protect your cylinder's paint and finishFeatures:- Designed for 7.25 in (184 mm) diameter primary cylinders- Rubber bumpers to protect paint- 316 grade stainless steel construction- Adjustable length nylon webbing- Roller wheels make it easier to cam over the buckle and provide protection to the cylinder paint- Stainless steel cam buckle- The band can be rotated in the bracket so that the buckle