Nails, Screws, Fasteners

Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive …

The Machine Screw Pozi Countersunk, Bright Zinc Plated, is a versatile and reliable fastening solution designed for a variety of applications. Crafted from high-quality steel and finished with a bright zinc plating, these screws offer superior corrosion resistance, making them ideal for use in both indoor and outdoor environments. The countersunk head design ensures a flush finish with the surface, providing a clean and professional appearance. Features & Benefits • Countersunk head • Metric thread Specifications • Diameter: M5 • Length: 20mm • Quantity: 100

The Arrow JT21 3/8-inch staple is a genuine Arrow product. Fit for the TT21, TT21, JT21CM, JT27, & T27 Staplers. It also fits the Easyshot 5650, and most Stanley light duty guns. Each box contains 1,000 pieces. It is a narrow-crown thin-wire staple. Designed and Assembled in USA.

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M6 x 20 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 10mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

Manufactured with a large flat head, which distributes the load across the fixing to increase the clamping effectiveness. Making it ideal for clamping thin sheet metal, plastic and wood. Features & Benefits • Dome head • Carbon steel • Fully threaded Specifications • Diameter: M6 • Length: 30mm • Quantity: 10

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. Features & Benefits • Dual angle thread designed for superior hold • Partially threaded stops the timber jacking (Partially threaded from 40mm) • Rapid drive twist cut enhances drive performance • Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque Specifications • Diameter: 3.5mm • Length: 12mm • Quantity: …

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M6 • Thread Pitch: 1mm • Socket Size: 10mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 10mm • Size: M6 x 20mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 8

A larger diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Sometimes known as a ‘mudguard’ washer. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Features & Benefits • Confirms to DIN9054 • Stainless steel Specifications • Diameter: 12mm • Length: 35mm • Quantity: 10

The Machine Screw Pozi Countersunk, Bright Zinc Plated, is a versatile and reliable fastening solution designed for a variety of applications. Crafted from high-quality steel and finished with a bright zinc plating, these screws offer superior corrosion resistance, making them ideal for use in both indoor and outdoor environments. The countersunk head design ensures a flush finish with the surface, providing a clean and professional appearance. Features & Benefits • Countersunk head • Metric thread Specifications • Diameter: M6 • Length: 12mm • Quantity: 100

Product Description Arrow jt21 staples Staples to fit JT21/21C staple gun. Size 5/16in. Box 1000. Manufacturer's Description Arrow Jt21 Staples Staples to fit JT21/21C staple gun. Size 5/16in. Box 1000.

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 7Adjustment . 135 - 165mmAdjustment. 5.1/4 - 6.1/2inAdditional Information:• Clip Type: Hose Clip• Material: Zinc Protected• Clip Size: 7in• Min. Size (mm): 135• Max. Size (mm): 165• Min. Size (in): 5.1/4• Max Size (in): 6.1/2

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 16mm • Quantity: 14

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 15mm.Colour : Brown.Pack : Clam pack of 1000.Additional Information:• Size (mm): 15• Finish: Brown• Pack Qty.: 1000

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has.

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 12mm • Quantity: 22

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 38mm • Quantity: 14

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M12 • Thread Pitch: 1.75mm • Socket Size: 19mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 19mm • Size: M12 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 19mm • Quantity: 14

Plasplugs® Solid Wall Super Grips™ are suitable for fixing into concrete and brick. They are available in 3 different sizes/colours. Yellow: Regular-duty, accepts screws No.4-8 (3-4.5mm)Red: Regular-duty, accepts screws No.6-12 (3.5-5.5mm)Brown: Heavy-duty, accepts screws No.8-14 (4.5-7mm)The red wall plugs are regular-duty and will accept screws No 6-12 (3.5-5.5mm).Drill: 6mm.Pack quantity: 100.Additional Information:• Pack Qty.: 100

These Forgefix Hinged Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most type of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.uantitHinged Cover Cap White No. 6-8 Bag 100Additional Information:• Cover Type: Hinged• Colour: White• Min. Size (No.): 6• Max. Size (No.): 8• Pack Qty.: 100

Box of heavy duty staples for use with Staplers/Tackers, Electric Stapler/Nailer. Sold in boxes of 1000 staples per box.1 x Steel Staples, 6 x 11.3mm (Pack of 1000)

A traditional and commonly used washer for clamping and spacing applications. Features & Benefits • Plated in Trivalent Chromium Zinc • Zinc and clear finish • Carbon steel • Form A washer Specifications • Internal Diameter: 10mm • Size: 21mm • Thickness: 2mm • Quantity: 100

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 6Adjustment . 110 - 140mmAdjustment. 4.3/8 - 5.1/2inAdditional Information:• Clip Type: Hose Clip• Material: Zinc Protected• Clip Size: 6• Min. Size (mm): 110• Max. Size (mm): 140• Min. Size (in): 4.3/8• Max Size (in): 5.1/2

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M8 • Thread Pitch: 1.25mm • Socket Size: 13mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 13mm • Size: M8 x 20mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 6