Nails, Screws, Fasteners

This is a hexagonal nylon nut with a metric thread and is thinner than a Type P. Also known as locking nuts designed to prevent the nut from loosening. Used for all bolting and fastening applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M12 • Thread Pitch: 1.75mm • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 19mm • Nut Type: Nylon – Type T • H: 12mm • Pack Quantity: 5

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 12mm • Quantity: 22

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ2 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M5 x 16mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M6 • Thread Pitch: 1mm • Socket Size: 10mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 10mm • Size: M6 x 25mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 6

The Solo Countersinking Pozi Wood Screws are a single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. Features & Benefits • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion • 40° deep single thread to provide a secure fixing with high pull-out resistance • 25° sharp point and single lead for a fast start and improved thread acceptance Specifications • Pack Dimensions L x W x H: 92 x 72 x 58mm • Material: Carbon Steel • Lubrication: …

Heavy-duty Type G staples
Suitable for Heavy duty staplers/hammer tackers only
Chisel point style
Easy to open & reuse, colour-coded packaging
For insulation, carpet under laying & roofing felt

• Steel nut.• Supplied in resealable bag.• Manufactured to DIN 934.• Pack of 100.Steel nut manufactured to DIN 934. Supplied in resealable bag.• Steel nut. • Supplied in resealable bag. • Manufactured to DIN 934. • Pack of 100. • Model No. SN5Technical Specification:Nett Weight: 0.11kgPack Qty: 100Pitch: 0.8mmSize: M5Dimensions: Length: 10mm x Height: 135mmWeight: 0.104KgWarranty: Consumable

The Solo Countersinking Pozi Wood Screws are a single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. Features & Benefits • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion • 40° deep single thread to provide a secure fixing with high pull-out resistance • 25° sharp point and single lead for a fast start and improved thread acceptance Specifications • Pack Dimensions L x W x H: 92 x 72 x 58mm • Material: Carbon Steel • Lubrication: …

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M8 • Thread Pitch: 1.25mm • Socket Size: 13mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 13mm • Size: M8 x 25mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 4

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 38mm • Quantity: 12

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Specifications • Size(mm): M6 x 25 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Head Type: Dome • Point Type: B Point • Substrates: Hardwood, Softwood, Corrosive Wood • Pack Quantity: 10

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. Features & Benefits • Dual angle thread designed for superior hold • Partially threaded stops the timber jacking (Partially threaded from 40mm) • Rapid drive twist cut enhances drive performance • Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque Specifications • Diameter: 3.5mm • Length: 16mm • Quantity: …

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M6 x 30 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 10mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

Manufactured with a large flat head, which distributes the load across the fixing to increase the clamping effectiveness. Making it ideal for clamping thin sheet metal, plastic and wood. Features & Benefits • Dome head • Carbon steel • Fully threaded Specifications • Diameter: M6 • Length: 20mm • Quantity: 12

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 25mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Lloyds Register Approved 304 Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.Size 1AAdjustment 22 - 30mmAdjustment 7/8 - 1.1/8inAdditional Information:• Clip Type: Hose Clip• Material: Stainless Steel• Clip Size: 1A• Min. Size (mm): 22• Max. Size (mm): 30• Min. Size (in): 45511• Max Size (in): 1.1/8

These dowels are made from beech and provide secure joints for applications such as furniture building. Available in three sizes. Features and Benefits • Wooden dowels for joinery applications • Made from beech for strength and durability • Ideal for furniture building Specifications • Diameter: 8mm • Length: 40mm • Pack Quantity: 40

A traditional and commonly used washer for clamping and spacing applications. Features & Benefits • Plated in Trivalent Chromium Zinc • Zinc and clear finish • Carbon steel • Form A washer Specifications • Internal Diameter: 10mm • Size: 21mm • Thickness: 2mm • Quantity: 100

A larger diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Sometimes known as a ‘mudguard’ washer. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Features & Benefits • Confirms to DIN9054 • Stainless steel Specifications • Diameter: 12mm • Length: 35mm • Quantity: 10

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 12mm • Quantity: 200

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ2 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M4 x 25mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

The Solo Countersinking Pozi Wood Screws are a single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. Features & Benefits • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion • 40° deep single thread to provide a secure fixing with high pull-out resistance • 25° sharp point and single lead for a fast start and improved thread acceptance Specifications • Pack Dimensions L x W x H: 92 x 72 x 58mm • Material: Carbon Steel • Lubrication: …

Plasplugs® Solid Wall Super Grips™ are suitable for fixing into concrete and brick. They are available in 3 different sizes/colours. Yellow: Regular-duty, accepts screws No.4-8 (3-4.5mm)Red: Regular-duty, accepts screws No.6-12 (3.5-5.5mm)Brown: Heavy-duty, accepts screws No.8-14 (4.5-7mm)The red wall plugs are regular-duty and will accept screws No 6-12 (3.5-5.5mm).Drill: 6mm.Pack quantity: 100.Additional Information:• Pack Qty.: 100

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2