Nails, Screws, Fasteners

Sirius 8.8 zinc plated high tensil bolt

R-RBL-E Rawlbolt - Eye Bolt World's most popular all-purpose expanding shield anchor - eye bolt version Applications • Supporting guy ropes, stays and cables • Supporting ladder restraints Base material Approved for use in: • Cracked concrete C20/25-C50/60 • Non-cracked concrete C20/25-C50/60 • Unreinforced concrete • Reinforced concrete • Solid clay brick = 20MPa • Hollow Lightweight Concrete Block LAC 5 = 5MPa • Hollow Sand-lime Brick = 15MPa • Concrete hollow floor block (eg. Teriva) • Hollow-core Slab C20/25 • Hollow-core Slab C30/37-C50/60 Specifications • Diameter: M8 • Pack QTY: 2Features & Benefits• The …

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 12.5Adjustment 286 - 318mmAdjustment 11.1/4 - 12.1/2inAdditional Information:• Type: Hose Clip• Material: Zinc Protected• Clip Size: 12.1/2in• Adjustment (Metric): 285-318mm• Adjustment (Imperial): 11.1/4 - 12.1/2in

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is …

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is …

These Forgefix Multi-Purpose Pozi Compatible Screws with countersunk heads have a zinc finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface …

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ2 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M5 x 50mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These unique features coupled with a synthetic lubrication and dual angle thread results in 52% less insertion torque and 43% quicker insertion time. Features & Benefits • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage • Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance • Twin cut technology for …

Universal full thread countersinking wood screws which are ideal for a wide range of indoor applications. Specifications • Spax No: 1081010350253 • Thread Diameter: 3.5mm • Total Length: 25mm • Partial Thread Length: 21mm • Head Diameter: 7mm • Bit Size: Z2Features & Benefits• Countersinking MULTI Heads • Serrated threads for quick and secure fastening • 4CUT Point reduces splitting and enables screws to be driven without pilot holes in many wood types • Requires less driving torque and prolongs battery life with cordless tools • Wirox surface for corrosion resistance • Wirox A3J: free from chromium-VI and more environmentally friendly …

BT13 Series 18 gauge brown brad nails for use with the Bostitch brad nailer. Finish nails (brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 40mmColour : Brown.Pack : Clam pack of 1000.Additional Information:• Type: Brad Nails• Size: 40mm

Increased flexibility - with universal application.Applications:For universal use in wood, chipboard, MDF, plastic and even thin metal sheet!Multihead:- Cutting ribs help the head countersink into wood easily.- Screw head ribs help reduce the thread being stripped when fixing hinges etc.- Deeper recess in screw-head for a stronger bit hold.4CUT Point:- No splitting even when working close to the edge.- No pre-drilling required even in hard woods.- Screw point takes immediate hold.Ground Serrations:- Reduces driving in torque.- Hard synthetic coating for easy driving.- Ultimate holding power.The new SPAX looks unusual. The combination of 4CUT point, MULTIhead and the patented ground serrations …

A larger diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Sometimes known as a ‘mudguard’ washer. Features & Benefits • Plated in Trivalent Chromium Zinc Specifications • Diameter: 8mm • Length: 30mm • Quantity: 100

Bosch Type 53 staples suitable for the PTK 3.6v staple gun. Specifications: Type: 53 Width (B) mm: 11,4 Thickness (D) mm: 0,74 Length (L) mm: 8,0 Materials: Natural materials Wood Synthetic material Materials in Detail: Textiles Carpet Acoustic panels Lawn carpetContents• 1000 x 8mm staples

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M8 x 100 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 13mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 5

These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts …

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ3 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M6 x 25mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

Designed to give ultimate performance in a multitude of materials, the patented twin-cut point gives a consistent and rapid "pick-up" and reduces timber splitting. These unique features coupled with a synthetic lubrication and dual angle thread results in 52% less insertion torque and 43% quicker insertion time. Features & Benefits • Deep recess to prevent 'cam-out', giving a precise and positive drive control on every screw • Ribs under head for improved countersinking and to give a smooth and flush finish, also prevents splitting and material damage • Dual angle thread gives an ultimate performance and an exceptionally high pull-out resistance • Twin cut technology for …

Engineered for superior weather resistance and durability, these sealing washers are crafted from EPDM rubber with a galvanised steel backing for long-lasting performance. Designed to create a watertight seal between screws or bolts and roofing materials, these washers effectively prevent leaks and corrosion in outdoor applications. The EPDM rubber provides excellent resistance to UV rays, ozone, and extreme temperatures, ensuring reliable sealing performance in various weather conditions. With their galvanised steel construction, these washers offer exceptional strength and corrosion resistance, making them suitable for use in demanding environments. Features & Benefits • Used to prevent …

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 11.5Adjustment 260 - 292mmAdjustment 10.1/4 - 11.1/2inAdditional Information:• Type: Hose Clip• Material: Zinc Protected• Clip Size: 11.1/2in• Adjustment (Metric): 260-292mm• Adjustment (Imperial): 10.1/4 - 11.1/2in

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M8 x 40 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 13mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is …

These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts …

A traditional and commonly used washer for clamping and spacing applications.Features & Benefits• Plated in Trivalent Chromium Zinc

The new SPAX looks unusual. The combination of 4CUT point, MULTIhead and the patented ground serrations gives you a new top-notch SPAX. It not only stretches the material out, but it also divides the fibres while the thread with the optimized ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wood surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. SPAX will give trouble-free fastening in all varieties of working materials - from hard and soft wood to plastics to thin metal sheet and extruded profiles.…