Nails, Screws, Fasteners

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Specifications • Brand: Timco • Size: M10 • Length: 100mm • Pack Quantity: 2

Rapid Type 140 staples are made from galvanised stiff flat wire for fastening thin sheet materials by providing a broader holding area against the material to reduce possibility of pulling through.I Features and Benefits Heavy duty Suitable for tackers Ideal for paper, plastic sheeting and other non-fibrous materials Notes Images are for illustration purposes only

For use in 0327 Master Nailer 191EL Pro, 0192 Master Nailer 181ELS Pro, 0328 Hobby 53EL, 516857 Pro 140EL, 0756 Master Nailer Ranger 40 Duo Pro Pack, 0758 Master Nailer Ranger 40 Duo Trademans Pack.Additional Information:• Size: 32mm• Pack Qty.: 1000

R-STUDS Metric Threaded Rods - Steel Class 5.8, Flat Head, Zinc Flake. Threaded rod for outdoor applications increased corrosion resistance due to hot dip zinc external protection layer. Applications • Fastening with bonded anchors • Balustrading & handrails • Barriers • Cable trays • Consoles • Curtain walling • Formwork support systems • Heavy machinery • Lamps • Safety barriers • Road Signs • Railings • Public seating Features & Benefits • Threaded rod made of hot dip galvanized steel is suitable for outdoor use and in damp conditions • Can be post-installed through fixture in some cases. (Consult technical advisory …

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Specifications • Brand: Timco • Size: M12 • Length: 100mm • Pack Quantity: 2

R-RBL Rawlbolt - Loose Bolt for use in hollow core slab and ceramic substrates. World's most popular all-purpose expanding shield anchor - loose bolt version. Approved for use in • Solid clay brick = 20MPa • Hollow Lightweight Concrete Block LAC 5 = 5MPa • Hollow Sand-lime Brick = 15MPa • Concrete hollow floor block (eg. Teriva) • Hollow-core Slab C20/25 • Hollow-core Slab C30/37-C50/60 Applications • Roller shutter doors • Fire doors • Structural steelwork • Security grills • Heavy machinery • Pipework/ductwork supports Features & Benefits • RAWLBOLT - first ever mechanical anchor in the world, forerunner of all of the later …

Type T hexagonal nylon nut with a metric thread and is thinner than a Type P. Also known as locking nuts designed to prevent the nut from loosening. Used for all bolting and fastening applications. Features & Benefits • Plated in Trivalent Chromium (Cr3) Zinc • Standard metric thread Specifications • Size: M6 • Height: 6mm • Quantity: 500

Increased flexibility - with universal application.Applications:For universal use in wood, chipboard, MDF, plastic and even thin metal sheet!Multihead:- Cutting ribs help the head countersink into wood easily.- Screw head ribs help reduce the thread being stripped when fixing hinges etc.- Deeper recess in screw-head for a stronger bit hold.4CUT Point:- No splitting even when working close to the edge.- No pre-drilling required even in hard woods.- Screw point takes immediate hold.Ground Serrations:- Reduces driving in torque.- Hard synthetic coating for easy driving.- Ultimate holding power.The new SPAX looks unusual. The combination of 4CUT point, MULTIhead and the patented ground serrations …

Firmahold Staples Type 140 T50 Stainless 12mm. Heavy duty staples suitable for a range of professional second fix applications including carpet fitting, roof insulating, woodworking and more. Specifications • Substrates: Hardwood, Softwood, Plywood, Chipboard, MDF, Plastic, Fabric, Membrane • Length: 12mm • Point Type: Chisel • Crown Type: FlatFeatures & Benefits• Super sharp chisel point • Heavy duty 1.2mm wire • Suitable for internal and external applications • Flat crown for improved material clamping

Flexi-shaft hose clip drivers fitted with a 8mm diameter spring steel flexible shaft. Attached with 1/4" square drive male end and a bi-material soft grip handle providing user comfort even when used for prolonged periods. Supplied with a 7mm socket.

Increased flexibility - with universal application.Applications:For universal use in wood, chipboard, MDF, plastic and even thin metal sheet!Multihead:- Cutting ribs help the head countersink into wood easily.- Screw head ribs help reduce the thread being stripped when fixing hinges etc.- Deeper recess in screw-head for a stronger bit hold.4CUT Point:- No splitting even when working close to the edge.- No pre-drilling required even in hard woods.- Screw point takes immediate hold.Ground Serrations:- Reduces driving in torque.- Hard synthetic coating for easy driving.- Ultimate holding power.The new SPAX looks unusual. The combination of 4CUT point, MULTIhead and the patented ground serrations …

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials, whilst achieving exceptional pull-out resistance. It has been designed to give the user a consistent and reliable product that can be used in a variety of applications. Features & Benefits • Dual angle thread designed for superior hold • Partially threaded stops the timber jacking (Partially threaded from 40mm) • Rapid drive twist cut enhances drive performance • Slash point tip helps prevent the timber splitting when screwing close to the edge, whilst also helping to reduce torque Specifications • Diameter: 4mm • Length: 60mm • Quantity: …

Features • SPAX 4CUT point allows screwing in without pre-drilling (wood-dependent), reduces splitting as square end displaces the fibres • SPAX ground serrations: up to the point - quick and secure fastening • SPAX MULTI Head: flush countersinking. Mills in wood and stops on metal Advantages • No pre-drilling (wood-dependent) • Quick and safe fastening with reduced driving in torque (more screwed connections per battery charge) • Effectively reduces splitting of the wooden material, even when close to the edge • Multifunctional applications indoors Application • Universal usage Special properties • Partial thread: firm tightening of the upper wood …

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has.

Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip. Gripit Brown Fixings allow you to fix super heavy stuff, like radiators, sanitary ware and fittings to plasterboard walls. One Gripit Brown holds up to 93kg. Easy to install, you will require a 20mm drill bit. They are also removable and reusable. Each Gripit Brown is supplied with an M6 x 30mm bolt.This Pack of Gripit Brown Plasterboard Fixings contains: 8 x Gripit Brown Fixings8 x Bolts M6 x 30mmAdditional Information:• Type: Plasterboard Plug• Size: M6 x 30mm• Pack Qty.: 8• Drill: 20mm

Type P hexagonal nylon nut with a metric thread. Also known as locking nuts, designed to prevent the nut from loosening. Used for all bolting and fastening applications. Features & Benefits • Plated in Trivalent Chromium (Cr3) Zinc • Standard metric thread Specifications • Size: M8 • Height: 9.5mm • Quantity: 200

Features & Benefits:• 100% nylon, tough and resilient for a long service life • Deep teeth ensure excellent grip in all types of building materials• Sprung ears provide a double lock against twisting Specifications:Type: Wall PlugFixing hole diameter: 7 mmPlug length: 30 mmMaximum fixing thickness: 40mmMaterial: Nylon

Full thread 4CUT stainless steel wood screws with countersinking heads. Spax rust-free stainless steel offers protection against corrosion and makes these screws ideal for outdoor applications where they will be directly exposed to the elements. Specifications • Spax No: 4197000350301 • Thread Diameter: 3.5mm • Total Length: 30mm • Partial Thread Length: 25mm • Head Diameter: 7mm • Bit Size: T15Features & Benefits• Suitable for direct exposure to the elements in outdoor applications • T-STAR Plus for positive, secure bit fitment, even when working overhead • Flush countersinking MULTI Heads • Serrated threads for quick and secure fastening • …

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Specifications • Brand: Timco • Size: M8 • Length: 100mm • Pack Quantity: 4

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Specifications • Brand: Timco • Size: M10 • Length: 75mm • Pack Quantity: 3

• Zinc plated self drilling pan head Phillips screw.• Supplied in resealable bag.• DIN 7504N.• Pack of 100.Zinc plated DIN 7504N self drilling pan head Phillips screw. Pack of 100. Supplied in resealable bag.• Self drilling pan head Phillips screw zinc plated. • Supplied in resealable bag. • DIN 7504N. • Pack of 100. • Model No. SDPH4213Technical Specification:Nett Weight: 0.16kgPack Qty: 100Size: M4.2 x 13mmDimensions: Length: 30mm x Height: 130mmWeight: 0.158KgWarranty: Consumable

The new SPAX looks unusual. The combination of 4CUT point, MULTIhead and the patented ground serrations gives you a new top-notch SPAX. It not only stretches the material out, but it also divides the fibres while the thread with the optimized ground serrations drive the screw on. This prevents the material from splitting. The patented MULTIhead has moulding and stopping qualities at the same time. The ridges mould into the wood surface, trimming off the drilled hole. The head can be driven home flush with the wood surface quickly and easily. SPAX will give trouble-free fastening in all varieties of working materials - from hard and soft wood to plastics to thin metal sheet and extruded profiles.…

• Zinc plated hexagon headed setscrews.• Manufactured to DIN 933 with high tensile strength grade 8.8 steel.• Fully threaded bolt.• Pack of 50.Zinc plated hexagon headed setscrews. Manufactured to DIN 933 with high tensile strength grade 8.8 steel.• Zinc plated hexagon headed setscrews. • Manufactured to DIN 933 with high tensile strength grade 8.8 steel. • Fully threaded bolt. • Pack of 50. • Model No. SS816Technical Specification:Nett Weight: 0.54kgPack Qty: 50Pitch: 1.25mmSize: M8 x 16mmDimensions: Length: 30mm x Height: 215mmWeight: 0.542KgWarranty: Consumable

A larger diameter washer ideal for spreading the clamping load, reducing a hole diameter and packing out. Sometimes known as a ‘mudguard’ washer. Features & Benefits • Plated in Trivalent Chromium Zinc Specifications • Diameter: 10mm • Length: 40mm • Quantity: 60