Hydraulic Presses & Stops

A set of eight steel mandrels, adaptor and press plate for use with the Clarke CSA20F 20Tonne hydraulic press, allowing the press to be used for a wider range of applications involving different sized workpieces. Mandrel Length/diameter: 50mm/10mm, 60mm/12mm, 60mm/16mm, 84mm/18mm, 84mm/20mm, 84mm/22mm, 105mm/25mm & 110mm/30mm

A set of four steel mandrels, adaptor, fixing bracket and press plate for use with the Clarke CSA10BB and CSA12F 10Tonne and 12Tonne hydraulic presses, allowing the presses to be used for a wider range of applications involving different sized workpieces. Mandrel Length/diameter: 15mm/15mm, 25mm/25mm, 40mm/40mm & 40mm/50mm.

Heavy duty welded steel construction for increased strength and safety. Suitable for commercial vehicles.

The Clarke CAX20S 20 Tonne Short Axle Stand is manufactured to a high quality, providing increased strength and safety. The stand benefits from a heavy-duty steel construction with durable powder coated finish. Utilising a screw-style stand with a ball bearing race for smooth action, it is easy to set your load at a precise desired support height from 410-600mm, whilst keeping keeping it secure with the locking collar.

Pair of Clarke CAX2TFB Strong Arm 2 tonne folding Axle Stands - Welded steel construction for increased strength and safety with a tough and durable powder coated finish.

With a combined capacity of 3 tonnes and finished with a tough anodised coating, these aluminium axle stands are perfect for use by the home mechanic. These stands are designed with a U-shaped saddle for secure and even load distribution, with a wide base for stability. The stands are fitted with a pin & chain load support offering 5 height positions 6 height positions from 271-396mm

The Clarke StrongArm CAX3TPB 3 tonne axle stands are manufactured from welded steel wiith a durable powder coating for increased strength and safety. The stands are designed with a 'U' shaped saddle for even load distribution and 5 pin positions allowing a height range from 300-490mm.

The Clarke CPS30T is a combination of a protective steel grid guard with a protective Polycarbonate screen built for safe operation of the CSA30FPB 30-tonne Floor Press. The locking pins enable easy adjustment of the protective screen height. The CPS30T Protective Screen and the full Clarke Strong Arm range of pneumatic presses are provided with a 12-Month Manufacturer's Warranty. Also available is the Clarke CPS50T Protective Screen, designed for use with the larger CSA50FPB 50-tonne Press.

The Clarke CPS50T is a combination of a protective steel grid guard with a protective polycarbonate screen built for safe operation of the CSA50FPB 50-tonne Floor Press. The locking pins enable easy adjustment of the protective screen height. The CPS50T Protective Screen and the full Clarke Strong Arm range of pneumatic presses are provided with a 12-Month Manufacturer's Warranty. Also available is the Clarke CPS30T Protective Screen, designed for use with the smaller CSA30FPB 30-tonne Press.

An essential tool for any garage or workshop, this bench press with 10 tonne capacity is ideal for the majority of small pressing jobs such as repairing small motors, armatures, removing and installing gears, bearings or other press fit parts. Supplied with a hydraulic pump, ram with pressure gauge and connecting hose, this press is simple to use and very effective, requiring minimum effort from the user to product fast, accurate presses time and again. Please note: This press is without the 7 Piece Adaptor Kit (Order Code: 020425060) and is sold separately.

Perfect for most small pressing jobs this economy floor press is ideal for use in DIY, garage or light workshop applications.

Built for tough daily use, the CSA12F 12 tonne capacity hydraulic floor press from Clarke is suitable for all automotive and industrial workshops. Ideal for repairing motors, armatures, removing and installing gears, bearings and other press fit parts. Supplies with a hydraulic pump, ram with pressure gauge and connecting hose, this press is simple to use and very effective, making potentially tricky jobs much easier. Please note: This press is without the 7 Piece Adaptor Kit (Clarke Code: 7615060) and is sold separately.

Utilising a hydraulic bottle jack mechanism to achieve an impressive 20 Tonne (20'000kg) capacity the CSA20EP is a perfect addition for any garage or engineering workshop. This floor press is constructed from high quality steel and finished with a durable powder coated finish for corrosion resistance and is provided with 2 flat bed plates.

The CSA20F from Clarke is a top quality 20 Tonne Hydraulic press that would make a great addition to any garage or engineering workshop. It's smooth hydraulic action ensures that power is applied positively and precisely to the workpiece for greater control and accuracy, while the impressive 20 tonne capacity and 189mm ram travel make the CSA20F the ideal press for larger work pieces.

The Clarke CSA20FBT is ideal for garage and engineering workshops with its smooth hydraulic action which ensures that power is positively and precisely applied to the workpiece. The Ram can be positioned along the top plate as required.

This 30 Tonne floor standing shop press is ideal for garage and engineering workshops, for replacing /removing bearings, pressing ball joints, pulleys, pins, plates or straightening metal work etc. A smooth hydraulic action ensures that power is positively and precisely applied. Fitted with a large pressure gauge enabling accurate and easy reading when applying pressure to the work piece.

Perfect for most small pressing jobs, this bench press is ideal for use in automotive and industrial workshops. Supplied with a hydraulic pump and ram the, press is simple to use, producing repeatable accurate presses.

This 50 Tonne floor standing shop press is ideal for garage and engineering workshops, for replacing /removing bearings, pressing ball joints, pulleys, pins, plates or straightening metal work etc. A smooth hydraulic action ensures that power is positively and precisely applied. Fitted with a large pressure gauge enabling accurate and easy reading when applying pressure to the work piece.

A robust hydraulic 10 tonne bench press with sliding ram. There are four adjustable table heights: 110, 195, 280 and 365mm. The glycerine liquid filled gauge provides increased accuracy and prolonged service life. There is a detachable hand pump that can be secured to the press or bench. An anti-kink coil is fitted to each end of the flexible hose for increased protection. The product is fitted with a safety valve to pretend the press from overloading. It is complete with two flat V-shaped blocks. Fully tested and certified for safe, reliable operation.

A hydraulic floor press for use in the garages and workshops - Featuring a sliding ram, 8 x adjustable platform heights ranging between 77 - 917mm, a liquid - filled gauge for increase accuracy and prolonged service life and a detachable hand pump, which can be secured to the press or bench. This product is fitted with an anti - kink coil fitted at each end of the flexible hose for added protection and supplied with 2 x flat V - shaped blocks.

A Draper Hydraulic Floor Press for use in the garages and workshops. Featuring a sliding ram, 9 x adjustable platform heights ranging between 28 - 998mm, a liquid - filled gauge for increase accuracy and prolonged service life and a detachable hand pump, which can be secured to the press or bench. The product is fitted with an anti - kink coil fitted at each end of the flexible hose for added protection, safety overload valve and Supplied with 2 x flat V - shaped blocks.

The Draper ARAS05-E is a pair of pneumatic axle stands fitted with an internal gas strut to enable an auto rising feature. This unit is easily operated by activating a lever, which enacts the internal air driven post to rise until the saddle reaches its maximum height. The locking pin keeps the saddle in the lowered position for when the stand is not in use and the extra wide base of the axel stand provides added stability. This pair of stands can hold up to 10 tonnes and are completed with a durable heavy duty build for ensured reliability.

These Draper pneumatic axle stands are of expert quality and offer a capacity per stand of 10 tonnes, and a capacity per pair of 20 tonnes. Both stands come fitted with an internal gas strut that provides a handy auto-rising feature. They are both easy to use, and effective, as activating a lever causes the internal air driven post to rise until either the saddle makes contact or it reaches its maximum height. Once the necessary height has been achieved, you can keep the saddle secured thanks to a locking pin whilst the extra wide, 327mmx327mmm base of the stand offers you added stability.

This Pair of Facom axle stands can withstand a maximum weight of 6 tonnes and feature a simple adjustment function to suit various vehicles up to this weight. These are a heavy duty pair of stands, manufactured from solid steel. They also feature a carrying handle, for portability.