Stands & Microphone Holders

Professional telescopic boom microphone stand, featuring die-cast aluminum heavy duty tripod base and upper joint, with thick steel pipes for optimum stability. The new concept upper joint, presents e more→rgonomic and high-quality components that increase the friction and allow accurate adjustments. It is also provided with a central die-cast aluminum sleeve covered with “soft-grip” rubber which allows a firm grip for a simple and safe height adjustment. Equipped with a 3/8” thread with 5/8” adapter included. Made in: China Weight: 2,9 kg Boom Length: 910 mm

Frameworks Telescoping Boom Mic Stand for Desktop Recording, Bass Drum, And Guitar AmpsDetails:Frameworks Telescoping Boom Mic Stand for Desktop Recording, Podcasting, Bass Drum, And Guitar AmpsFits M more→ost Popular Podcast Mics, Including Shure SM7B, Shure MV7, RODE Procaster, & RODE PodMic ModelsCan hold up to a 1.5lb microphone at full extensionBoom counterweight weighs 2.5lbsBase weighs 10lbs27 Inch (685mm) telescoping microphone stand boomLength and angle independently adjustableHeavy duty steel constructionBlack powder coat finishCable management includedDimensions:Min Height: 12.75"Max Height: 16.00"Ext Width: 8.00"Ext Height: 4.50"Weight: 14.50lbs Weight: 6,5 kg Height Adjustable: Yes Colour: …

The shoulder microphone stand will be appreciated especially by youtubers, podcast creators or smaller radios. The Samson MBA28 brings you a little closer to the professional sphere and ensures the co more→mfort of your creative work. The arm reaches a length of up to 28" and can carry a microphone weighing 5lbs. The handling of the arm is very simple and above all quiet thanks to the built-in springs. The package also includes 2 stands for mounting the stand - one with a clamp for attachment to the edge of the table and one for fixed installation. Made in: China

Gooseneck. Material: steel. Thread: 3/8'' male and 3/8'' female. Diameter: 18,5 mm. Length: 500 mm. Weight: 0,56 kg. Colour: Black. Made in: Germany

Compact Base, Low-Profile Desktop Mic Stand. Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications: Broadcasts, Podcasts, Live Streams, & More. Ergonomic Grip Twist Clutch Adjus more→ts & Locks Height Between 330 - 400 mm. Non-Slip, 115 x 200 mm Weighted Rectangular Base with Vibration-Absorbing Rubber Gasket. Black Powder-Coated Steel Construction with Integrated Cable Management Clip. Тype: Microphone Stand Application: Broadcast;Interview;Stage;Podcasting;Gaming Height Adjustable: Yes Material: Steel Package Contents: Stand;3/8” to 5/8” adapter Thread: 5/8";3/8" Maximum Height: 406 mm Minimum Height: 330 mm

Compact and sturdy drum microphone mount. Mounts mics to the side of a drum for compact and accurate drum mic placement.

Round Base Microphone Stand with 12" Base. Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications. Ergonomic Grip Twist Clutch Adjusts & Locks Height Between 890 - 1625 mm. Non-S more→lip, 300 mm Weighted Round Base with Vibration-Absorbing Rubber Gasket. Black Powder-Coated Steel Construction with Integrated Cable Management Clip. Height Adjustable: Yes Application: Stage;Studio Тype: Microphone Stand Package Contents: Stand;3/8” to 5/8” adapter Weight: 4,17 kg Maximum Height: 1625 mm Thread: 3/8";5/8" Minimum Height: 889 mm

Individual Compartments Prevent Metal-to-Metal Contact for up to 3 Stands. Formed Nest Interior Compartment with 5 Individual Mics Drops. Constructed with Durable 600D Nylon Exterior with Reinforced P more→added Carrying Handle. Includes Adjustable Over the Shoulder Carrying Strap and Integrated Cable Compartment to Store Cables. Weight: 1,8 kg Тype: Bag Interior Depth (mm): 20.32 Interior Height (mm): 109.22 Interior Length (mm): 20.32 Height (cm): 20.9 Length (cm): 111.76 Material: 600D Nylon Padding: None Width (cm): 26.0 Handle: Yes Compatible with: Microphone Stand Zip: Yes

Round Base Microphone Stand with 10" Base. Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications. Ergonomic Grip Twist Clutch Adjusts & Locks Height Between 890 - 1625 mm. Non-S more→lip, 250 mm Weighted Round Base with Vibration-Absorbing Rubber Gasket. Black Powder-Coated Steel Construction with Integrated Cable Management Clip. Weight: 3,4 kg Maximum Height: 1625 mm Thread: 3/8";5/8" Application: Studio;Stage Minimum Height: 889 mm Package Contents: Stand;3/8” to 5/8” adapter Тype: Microphone Stand Height Adjustable: Yes

Portable stand for iPad 2 and 3 suitable for video recording. The stand is made from polycarbonate/ABS blend and metal stands. Features accessory mounts for lighting, audio gear and tripod/dolly (iPad more→and accessories are not included). Length (cm): 34.8 Colour: Black Application: Video Production;Recording Width (cm): 24.8 Weight: 530 g Made in: China

The TAMA Standard Microphone Stand Bag features 10mm of inner cushion and 600 denier waterproof surfaces, that securely protects your microphone stands during transportation. Padded shoulder straps an more→d handle make for easy carrying in any situation. Up to six pieces of microphone stand or two pieces of speaker stands can be stored inside. Handle: Yes Padding: 10 mm Colour: Black Zip: Yes Lock: No Тype: Bag Depth (cm): 22.0 Height (cm): 20.0 Material: Nylon Made in: China Length (cm): 120.0

Bosch LBC1221/01 Straight microphone stand

Microphone stand with round base. Massive round base with a diameter of 250 mm. Adjustable arm from 420 to 720 mm. Adjustable stand height from 860 to 1550 m, Stand weight: 6.4 kg, color black. Made in: Germany

Tripod Mic Stand with Adjustable Height & Telescoping Boom. Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications. Ergonomic Grip Twist Clutch Adjusts & Locks Height Between 104 more→0 - 1780 mm. Telescoping Boom Section Provides Extended Mic Reach. Collapsible Tripod Base with Non-Slip Rubber Feet and White Safety Trim On Feet (Removable). Black Powder-Coated Steel Construction with Integrated Cable Management Clip. Package Contents: Stand;3/8” to 5/8” adapter Weight: 2,45 kg Application: Studio;Stage Maximum Height: 1778 mm Minimum Height: 1041 mm Height Adjustable: Yes Тype: Microphone Stand

Boom Arm with clamp allows to set up extra microphone or accessories from one Mic Stand. The clamp holds pipes with diameters from 15mm to 25.4mm, most of mic stand pipes and some of drum hardware pip more→es. Vice-Grip Boom tilter secures holding heavy weight microphone. Features: - Microphone Telescoping Boom Arm with Clamp- Iron-Core Telescoping Boom Arm- Vice-Grip Boom Tilter- Clamp holds pipes with diameters from 15mm to 25.4mm- Boom Arm : 290-455mm (11 7/16"-17 15/16") Made in: China Colour: Black Weight: 0,87 kg Maximum Length (cm): 45.5 Тype: Boom Arm Minimum Length (cm): 29.0

Finally an ''hybrid'' microphone boom stand that uses materials technically proper for any function. After many years of manufacturing experience we have been able to ''mix'' plastic and metallic mate more→rials in order to make the product lightweight in the upper part and heavy where needed, moving down the barycentre. On the critical points of sliding and rotation we obtained fluid movements and strong tighten, avoiding the materials get scratched or damaged during the time. All that studied and elaborated on a perspective of totally innovative design. MS11 ''Hybrid'' is addressed to a professional market lover of functional details that, in our opinion, can enjoy our reliable job. Maximum Height: …

Tripod Mic Stand with Adjustable Height & Telescoping Boom. Designed to Hold Your Preferred Shure Mic for a Wide Variety of Applications. Quick Easy Height Adjustment with One-Handed Pistol Grip Clutc more→h Locks Height Between 1140 - 1765 mm. Telescoping Boom Section Provides Extended Mic Reach. Collapsible Tripod Base with Non-Slip Rubber Feet and White Safety Trim On Feet (Removable). Black Powder-Coated Steel Construction with Integrated Cable Management Clip. Application: Stage;Studio Height Adjustable: Yes Тype: Microphone Stand Minimum Height: 1143 mm Weight: 2,54 kg Package Contents: Stand;3/8” to 5/8” adapter Maximum Height: 1765 mm

Swivel mount with a plastic clamp for miniature microphones. It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Application: Recording;Studio;Stage Тype: Holder more→Original Colour by Producer: Black Compatible with: KM D;KMR Series;KM 100;KM 180;KM 80 Made in: China Package Quantity (pcs): 1 Material: Plastic Colour: Black

Extensible arm microphone stand featuring fixed desktop base and clip-on base desktop stand. Suggested for radio installations and dubbing studios. 5 m XLR – XLR microphone cable included. Made in: Ch more→ina Weight: 1,3 kg Package Contents: Microphone Cable Incl. Gig bag/Case: None

Mount for microphones. The InVision Softie Lyre Mount uses the Lyre system to provide complete isolation against handling and cable-borne noises. The Mount is supplied either with a lightweight Pistol more→-grip handle. Together the suspensions and the handle provides a quick, simple, robust and cost effective shock-mount for the tough environment of modern day ENG and location recording. This universal shock-mount has a soft-feel grip moulded into the clip which securely holds the microphone, preventing any slipping or twisting. The Lyre are extremely robust, and virtually unbreakable, as they do not use elastic or rubber components that are prone to wear and tear. The Pistol-grip has an added element …

Studio microphone stand with extendable arm with adjustable elevation, ideal for radio installations and dubbing studios. Stand is made of durable steel and equipped with professional knob for the hei more→ght fastening on fixed desktop stand, with maximum height 100 cm. Weight: 1.2 kg. Maximum load: 1.8 kg. Black colour. Made in: China Load Capacity: 1,8 kg Maximum Height: 1000 mm Weight: 1,8 kg

The INV-Lite is the new addition to the Rycote InVision range of boom shock mounts. Specifically designed for popular short-shotgun microphones, for indoor boom pole recordings, the unique ‘cam- more→lever’ design grips the mic at its rear without covering the interference tube slots. This allows for easy use of a foam windscreen, without the need to modify or cut the foam first. Choose the 19mm model for the DPA 4017B, 4017C & 4018; the Sanken CS-1e and Sennheiser MKH 8060, MKH 8050, 8040 & 8020. The 21mm version fits the Schoeps MiniCMIT. Main Features • Designed specifically for shorter, lighter shotgun mics for interior booming;• Unique cam-lever clamp design allows super-fast …