Construction Adhesives

LOCTITE 648 is a high strength retaining compound that has high temperature resistance and is ideal for the retention of parts with a clearance or interference fit. Features and Benefits High strength formulation means the retaining compound is ideal for use on cylindrical fitting parts This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage due to shock and vibration Exhibits a robust curing performance and also works on passive substrates Offers high-temperature performance and good oil tolerance Typical Applications Manufacturing

Designed for the locking and sealing of threaded fasteners. Eliminates the need to disassemble prior to application. Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. Fill porosity in welds, castings and powdered metal parts. Features and Benefits High strength, low viscosity Wicks into threads Can be applied after assembly

402 INSTANT ADHESIVE 500gm by Zoro Select

High strength two part no mix general part adhesive. Tough and impact resistant bond. Good peel strength. Bonds a wide range of substrates. Typical Applications Adhesive type: acrylate Gap fill: 0.50mm Shear/peel strength: 35N/mm Fixture time: 5 minutes Temperature: -40 to +120C Notes To be used with initiator No.5 LOC7252574D (35ml) or LOC7252575E (1ltr) Full kit available LOC7252550F

Low bloom low odour. Medium/high viscosity. Ideal where cosmetic appearance is required. Improved fixture strength on metal and plastic. Also for porous substrates and acidic surfaces. Drinking water WRAS approved. Features and Benefits Particularly suited to bonding metal, rubber and plastic materials High viscosity Fast setting Gap fill: 0.25mm. Colour: clear. Temperature: -40 to +80C. Comment: low bloom, low odour.

Low bloom low odour. Medium viscosity. Ideal where cosmetic appearance is required. Improved fixture strength on metal and plastic. Also for porous substrates and acidic surfaces. Features and Benefits Clean, clear bond Low bloom, low odour, low viscosity Provides a strong bond, even on porous and acidic surfaces Notes Gap fill: 0.10mm. Colour: clear. Temperature: -40 to +80C. Comment: low bloom, low odour, low viscosity.

Vinyl Tape J2000 101mmx30m

Polyester Tape J2000 101mmx30m

LOCTITE 406 is a low viscosity instant adhesive, designed especially for the fast bonding of plastics and rubbers. Features and Benefits When combined with primers for cyanoacrylates, for example LOCTITE 770 OR LOCTITE 7239, it can also be use on difficult-to-bond plastics Low viscosity means it's perfect for bonding of plastics and elastomeric materials, where a very fast fixture is required Typical Applications Plastic industry Rubber industry

Black rubber toughened instant adhesive. High viscosity. Ideal where bonded parts are subject to impact and peel. Features and Benefits Resistant to shock loading High viscosity Suitable for bonding metal to metal to plastic or rubber Notes Gap fill: 0.20mm Colour: black Temperature: -40 to +100C Comment: black rubber toughened

Tape Drive Installation Svc Ha113a1#596

WATERBASED COATING, 08881, BLACK TEXTURED, 22 LITRE DRUM by 3M

A colourless, toughened, ethyl-based instant adhesive. It has a fixture time of 10 - 20 secs. It has high resistance to impact and shock loads, high peel strength and is suitable for bonding plastics, rubber, metals, porous and absorbent substrates and acidic surfaces. Good resistance in humid environments. Features and Benefits High impact resistance Resists humidity Rapid fixture time of 10-20 seconds Gap fill: 0.25mm

BULK PACK ALL-PURPOSE GLUE STICKS 5KG 11MM DIAMETER X 300MM

Bonds most substrates including plastic, rubber, metal, card and wood. High viscosity suited where gap fill is required. Features and Benefits Bonds most substrates Forms a quick, highly durable bond High viscosity, perfect for gap filling Technical Information Gap fill: 0.25mm. Colour: clear. Temperature: -40 to +100C. Comment: universal, medium viscosity

An instant adhesive designed for the assembly of difficult-to-bond materials which require uniform stress distribution and high tensile and/or shear strength. The product provides for the rapid bonding of a wide range of materials, including metals, plastics and elastomers. The gel consistency enables overhead and vertical application. LOCTITE 454 is also suited to bonding porous materials such as wood, paper, leather and fabric. Perfect for all quick repair jobs. Features and Benefits Rapid bonding of almost any materials Fast yet strong bond enables overhead and vertical application Perfect for time-sensitive repair jobs NSF P1 registered Notes Gap fill: 0.25mm Colour: clear Temperature:

Black rubber toughened instant adhesive. Low/medium viscosity. Ideal where bonded parts are subject to impact and peel. Suitable for bonding metal to metal to plastic or rubber. Resists shock loading. Features and Benefits Long lasting bond Incredibly strong fix Impact resistant Notes Gap fill: 0.25mm Temperature: -40 to +120C. Comment: toughened, black, slower cure

LOCTITE 406 is a low viscosity instant adhesive, designed especially for the fast bonding of plastics and rubbers. Features and Benefits When combined with primers for cyanoacrylates, for example LOCTITE 770 OR LOCTITE 7239, it can also be use on difficult-to-bond plastics Low viscosity means it's perfect for bonding of plastics and elastomeric materials, where a very fast fixture is required Typical Applications Plastic industry Rubber industry

Polyester Tape J2000 57mmx30m

Vinyl Tape J2000 57mmx30m

LOCTITE TYPE 542 THREAD SEALANT 250ml

Rubber seal perbunan 50m

EVO-TECH TA 431 is a two component, highly reactive, toughened acrylic adhesive that cures at room temperature. Performs well in humid and exposed external environments. EVO-TECH TA 431 has been designed for structural bonding and gives excellent adhesion to ABS and GRP it is also suitable for bonding cast acrylics, uPVC, foamed uPVC, high impact polystyrene, nylon, metals and PETG. Flammability: Highly flammable Temperature Resistance (long term): Approx. 60C

3038 is a yellow, pre-mix polyolefin structural bonder which has good impact resistance. It has very good adhesion to polyolefin substrates (PP, PE) and to e-coated metals. It has a working life of 4 min and a fixture time >40 min. It has a service temperature range up to +100C and a shear strength of 13 N/mm at PBT-plastics. Adhesive type: acrylate. Gap fill: 0.25mm. Shear/peel strength: 13N/mm (PBT). Fixture time: 360 minutes. Temperature: -40 to +100C.