Derailleurs

Power supply cable SHIMANO Di2EW-SD50.waterproof plug.transmits the interactive signals and supplies power to all the elements.

The SD50 E-TUBE wire transmits interactive signals and provides power to E-TUBE DI2 drivetrains. With a compact, waterproof connector, it can be easily routed internally in handlebars and frames thanks to its "plug & gap" connection. Transmits interactive signals and power supply to each electronic components by “plug & gap” connectionCompact and waterproof connectorEasy to insert into frameWith cable tie type for built-in cable routing (EW-SD50-I)
Length (mm): 650.0
Made in: Vietnam

・Transmits interactive signals and power to each electronic component through plug & play connection ・Compact and waterproof connector ・Easy to insert into the frame ・Cable length 150 mm - 1,600 mm ・With cable clamp for integrated type cable passage (EW-SD50-I)

Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm A Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm is required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. Reliable and secure water-resistant connectors. Please note: EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.

Gear Cable Set / Derailleur / Compatible with Shimano / Plastic / Length 120 cm / Waterproof Plug

Jockey Wheel / Derailleur

Shimano EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm For use with Shimano Di2 electronic groupsets, the EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm provides a reliable signal transfer between components. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.

##Shimano EW-SD50 E-tube Di2 electric wire, 250mm The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. The Shimano EW-SD50 E-tube Di2 electric wire, 250mm connects the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. The water resistant connectors are reliable and secure and come in variable lengths as it is not possible to cut them to fit.

For internal DI2 wire routing, SHIMANO's SM-JC41 Junction B is the central connector for DI2 systems. Wires from the front and rear derailleurs, cockpit area, and battery all plug into the 4-port SM-JC41 junction, which is housed inside the bike frame.
Made in: Japan

Clamps Eps Collar 35Mm.

Polymer coated
Stainless steel
Outer cap with short tongue for ST (2 pcs.)
Outer cap with long tongue (3 pcs.)
Sealed outer cap for rear derailleur (1 pc.)
Inner end cap (2 pcs.)
Cover with tongue for rear derailleur (1 pc.)
OT-SP41 1700 mm
Made in: Japan

Shimano EW-AD305 SD300 to SD50 Conversion Adapter The EW-AD305 SD300 to SD50 Conversion Adapter allows the older Shimano Di2 SD50 E-Tube wires to be connected to the newer, slimmer EW-SD300 wires. It provides a secure and reliable connection that is stable and water-resistant.

Gear Cable Set / Derailleur / Compatible with Shimano / Stainless Steel / Length 210 cm

Jockey Wheel / Derailleur / Compatible with SRAM / Plastic

SRAM EX1 Inner Box/Rollers

Spare parts - Transmission.SRAM X0/X7/X9 Short Cage Derailleur Pulley Rear Kit.Sram spare for x.0 rear derailleur, mod.06-13 short cage, pulley assy.

Roller assembly Shimano (RD-M9000)

Shimano EW-SD300 E-tube Di2 Electric Wire 650mm - 800mm Made for use with Shimano’s electronic groupsets, the E-tube Di2 Electric Wire 650mm - 800mm connects the components together for reliable signal transmission. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.

Bike bearings pulley for SRAM X0

Shimano EW-SD300 E-tube Di2 Electric Wire 650mm - 800mm Made for use with Shimano’s electronic groupsets, the E-tube Di2 Electric Wire 650mm - 800mm connects the components together for reliable signal transmission. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.

Internal 4-Port Junction for EW-SD300.
Made in: Japan
Weight (g): 32.0
Usage Bikesport: Road;MTB
Variant: 4-Port
Type of Product: Connector Material

##Shimano Di2 9070/6870/6770 SD50 950mm Cable With the Shimano Di2 9070/6870/6770 SD50 950mm Cable, Shimano has the removed the traditional mechanical cables in favour of electrical wires, which not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts. E-tube Di2 uses a fully removable individual cable system from the battery indicator junction box enabling fine tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect the junction (either SM-JC40 external or SM-JC41 internal to the rear mech, front mech, battery and to the handlebar battery indicator junction box.…

Jockey Wheel / Derailleur / Number of Gears 11 / Compatible with SRAM / Plastic

Shimano EW-SD300 E-tube Di2 Electric Wire 300mm - 450mm The EW-SD300 E-tube Di2 Electric Wire 300mm - 450mm from Shimano is used to connect the components within an electronic drivetrain together. 3.45mm diameter plugs provide a reliable, water-resistant connection. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.