Handlebars

The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.The bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.The Thomson Carbon 35mm Riser Handlebars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is

The new Hope Carbon Handlebar uses extensive rider feedback to tune this Hope Bar for unbeatable performance. The Hope Carbon Handlebar has been meticulously designed, tested and manufactured in Barnoldswick UK. Larger diameters around the bends significantly increase the strength of the bar's profile. The optimised laminate used has been designed to increase strength in high-stress areas, enabling Hope to remove material from where it is not required to reduce weight.Hope Carbon Handlebar FeaturesRecommended Use - Trail / All MountainWidth - 800mmDiameter - 31.8mmRise - 20mmUpsweep - 5 degBacksweep - 7 degWeight - 225g

The Thomson Carbon 35mm Riser Handlebar is 800mm wide, offering 10mm and 20mm of centre rise together with a 9° backsweep and 5° upsweep. Built for strength with enough flex built in for all day comfort. Strong enough for all mountain/trail riding and light enough for racing.The bars are made with three different fibre types with different tensile strength and tensile modulus, including high strength carbon fibres. This helps to allocate stiffness and flex where needed.The Thomson Carbon 35mm Riser Handlebars are moulded with an EPS mandrel inside to avoid wrinkles inside the layup during moulding. Most other bars are moulded over inflated nylon bladders.All carbon fibre material is

TheHope Carbon 35mm Handlebarsfeature an optimised laminate that has been designed to increase strength in high stress areas, this enabledHope to remove material from where it is not required to reduce weight. Hope might be a little late to the 35mm handlebar party, but their new bars should prove to be worth the wait.Most 35mm bars on the market have proved to be uncomfortably stiff andHope knew they had to make something better. After much time and thought (and many cups of tea), they opted on using a completely new carbon laminate construction with a genuinely revolutionary new manufacturing technique. The end result is a bar that minimises vibrations, maximises feel, and is even more

Your ideal and comfortable companion for travel, cyclocross or long distances. Lightweight multilayer UD carbon bar with Di2 compatibility. Every angle is ideally laid out for best comfort holding position and maximum control on all-road and gravel bikes.Specifications:- Material: Matte UD Carbon- Reach: 73mm- Drop: 110mm- Drop flare: 30º- Grip flare: 18º- Clamp diameter: 31,8mm - Weight: 220 gr (44cm)- Finish: Matt UD Carbon / Water Transfer Decals- Width (C-to-C at Hoods): 42 / 44 cm- Width (C-to-C drop ends): 56 / 58 cm - Cable routing: Cable channels and Di2 compatibility - Strength test standard: ISO-4210-2 2015

Your ideal and comfortable companion for travel, cyclocross or long distances. Lightweight multilayer UD carbon bar with Di2 compatibility. Every angle is ideally laid out for best comfort holding position and maximum control on all-road and gravel bikes.Specifications:- Material: Matte UD Carbon- Reach: 73mm- Drop: 110mm- Drop flare: 30º- Grip flare: 18º- Clamp diameter: 31,8mm - Weight: 220 gr (44cm)- Finish: Matt UD Carbon / Water Transfer Decals- Width (C-to-C at Hoods): 42 / 44 cm- Width (C-to-C drop ends): 56 / 58 cm - Cable routing: Cable channels and Di2 compatibility - Strength test standard: ISO-4210-2 2015

Creston Carbon bars are crafted from high modulus carbon fiber to ensure precise steering in a lightweight and race worthy design. The extra reinforced clamping area reduces stress hotspots, and the optimized carbon layup all but eliminates harsh road vibrations. The flare shape provides you with easier access to the drops for a more comfortable hand position for gravel and touring bikes.Features:- Flared bars for optimal positioning on gravel bikes- 80mm Reach / 130mm Drop / 12° Flare- Full carbon constructionSpecifications:- Material: Carbon Ud- Geometry: Flare Bend, 80/130/12 Reach/Drop/Flare- Clamp Diameter: Oversize 31.8mm- Weight: 220g (420mm)

Specifications:- Integrated handlebar-stem- Material: Carbon UD- Length: 800mm- Stem: -2º- Back Sweep: 6º- Up Sweep: 6º- Virtual extensión: 50/60/70mm- (+10mm) a 50mm compared to traditional stem is 60mm aprox. - Weight: 245 gr

Specifications:- Integrated handlebar-stem- Material: Carbon UD- Length: 800mm- Stem: -2º- Back Sweep: 6º- Up Sweep: 6º- Virtual extensión: 50/60/70mm- (+10mm) a 50mm compared to traditional stem is 60mm aprox. - Weight: 245 gr

Specifications:- Integrated handlebar-stem- Material: Carbon UD- Length: 800mm- Stem: -2º- Back Sweep: 6º- Up Sweep: 6º- Virtual extensión: 50/60/70mm- (+10mm) a 50mm compared to traditional stem is 60mm aprox. - Weight: 245 gr

Effortless race position maintaining a consistent aero …The Ultimate SUMMIT 3K Matt Carbon road bar is our lightest and most technical drop road bar, with short and shallow drops it allows you to adopt for the most effective riding style. Specially designed carbon cable guides running along the underside of the bar to ensure that there is no cabling out of place and a comfortable cylindrical grip wherever your place your hands. Ergonomic flats running into the hoods develop a smooth comfortable hand position so you can concentrate your efforts on getting the most out of your ride or race.Created from the latest carbon fibre polymers and composites with the latest lay-up technology with stealth gr…

TheRenthal Fatbar V2 Carbon 31.8mm Handlebar has been updated and improved and now features an increased width from 780mm up to 800mm, aligning with Fatbar and Fatbar 35.The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Renthal Fatbar V2 Carbon 31.8mm Handlebar Features Increased width, from 780mm up to 800mm, aligning with Fatbar and Fatbar 35. Market leading weight of just 225g. The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Market leading rise options of 10, 20, 30 and 40mm. 7 degree back sweep / 5 degree up sweep geometry. Used by

TheRenthal Fatbar Carbon 35 Handlebaris the ultimate DH race handlebar, catering to the 35mm clamp size crowd renthal have matched the flex characteristics to its 31.8mm equivalent. With no loss in strength or durability all at a similar weight the ride quality definitely lives up to the Renthalname, one of the biggest changes to theRenthal Fatbar Carbonis its 20mm increase in width, this 800mm wide design creates the ultimate control through technical descents. A full UD carbon construction with efficient placement and orientation of the uni-directional carbon fibreshelp maximise the strength and stiffness of theFatbar Carbon 35, these fibres have also been developed to offer specific flex

TheRenthal Fatbar V2 Carbon 31.8mm Handlebar has been updated and improved and now features an increased width from 780mm up to 800mm, aligning with Fatbar and Fatbar 35.The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Renthal Fatbar V2 Carbon 31.8mm Handlebar Features Increased width, from 780mm up to 800mm, aligning with Fatbar and Fatbar 35. Market leading weight of just 225g. The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Market leading rise options of 10, 20, 30 and 40mm. 7 degree back sweep / 5 degree up sweep geometry. Used by

TheRenthal Fatbar Carbon 35 Handlebaris the ultimate DH race handlebar, catering to the 35mm clamp size crowd renthal have matched the flex characteristics to its 31.8mm equivalent. With no loss in strength or durability all at a similar weight the ride quality definitely lives up to the Renthalname, one of the biggest changes to theRenthal Fatbar Carbonis its 20mm increase in width, this 800mm wide design creates the ultimate control through technical descents. A full UD carbon construction with efficient placement and orientation of the uni-directional carbon fibreshelp maximise the strength and stiffness of theFatbar Carbon 35, these fibres have also been developed to offer specific flex

TheRenthal Fatbar Carbon 35 Handlebaris the ultimate DH race handlebar, catering to the 35mm clamp size crowd renthal have matched the flex characteristics to its 31.8mm equivalent. With no loss in strength or durability all at a similar weight the ride quality definitely lives up to the Renthalname, one of the biggest changes to theRenthal Fatbar Carbonis its 20mm increase in width, this 800mm wide design creates the ultimate control through technical descents. A full UD carbon construction with efficient placement and orientation of the uni-directional carbon fibreshelp maximise the strength and stiffness of theFatbar Carbon 35, these fibres have also been developed to offer specific flex

TheRenthal Fatbar V2 Carbon 31.8mm Handlebar has been updated and improved and now features an increased width from 780mm up to 800mm, aligning with Fatbar and Fatbar 35.The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Renthal Fatbar V2 Carbon 31.8mm Handlebar Features Increased width, from 780mm up to 800mm, aligning with Fatbar and Fatbar 35. Market leading weight of just 225g. The bar retains the same great flex characteristics, strength and durability as the very popular, original Fatbar Carbon. Market leading rise options of 10, 20, 30 and 40mm. 7 degree back sweep / 5 degree up sweep geometry. Used by

TheRenthal Fatbar Carbon 35 Handlebaris the ultimate DH race handlebar, catering to the 35mm clamp size crowd renthal have matched the flex characteristics to its 31.8mm equivalent. With no loss in strength or durability all at a similar weight the ride quality definitely lives up to the Renthalname, one of the biggest changes to theRenthal Fatbar Carbonis its 20mm increase in width, this 800mm wide design creates the ultimate control through technical descents. A full UD carbon construction with efficient placement and orientation of the uni-directional carbon fibreshelp maximise the strength and stiffness of theFatbar Carbon 35, these fibres have also been developed to offer specific flex

Some road bikes mount integrated handlebars that do not have a cylindrical shape, for those users Controltech has created the Sirocco carbon coupling with stem mounting. This same model can also be mounted on the handlebar The Sirocco Aero clip-on coupling can be mounted on most handlebars, whether mounted on the stem or on the handlebar. If you want to mount it on the stem you will find the appropriate Sirocco coupling here. Handlebar-mounted: The reversible elbow pads allow 4 different support positions so that the rider finds the most comfortable configuration. FEATURES: Material: UD carbon fiber.Maximum length: 213 mm.Armrest angle: 45 °Adjustable F/B pad: 46 mm.Weight: 382.5g (with C clamp), …

Specifications:- Integrated handlebar/stem Cockpit- Material: Carbon UD- Length: 800mm- Stem: -17º- Back Sweep: 9º- Up Sweep: 6º- Virtual extensión: 80/90/100mm- (+10mm) a 90mm compared to traditional stem is 100mm aprox. - Weight: 265 gr

Specifications:- Integrated handlebar/stem Cockpit- Material: Carbon UD- Length: 800mm- Stem: -17º- Back Sweep: 9º- Up Sweep: 6º- Virtual extensión: 80/90/100mm- (+10mm) a 90mm compared to traditional stem is 100mm aprox. - Weight: 265 gr

Di2 internal cable routing compatible.Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters

Di2 internal cable routing compatible.Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters

Di2 internal cable routing compatible.Easton's new AX series line of bars meets the needs of the growing drop bar adventure and gravel segment. Building off the highly successful and critically acclaimed line of new MCD road bars and EA70 and EC70 AX bar utilizes the same top shape and reach as well as the ergonomic drop shape but turns up the drop flare from 4 degrees all the way up to 16 degrees. The wider stance in the drops provides more control on rough terrain and long gravel assaults. Why 16-degrees? Based on extensive testing and rider feedback we determined that 16 degrees was the perfect balance of maximum bar flare that still allowed for efficient access and usage of the shifters