Stem

very stable, 3D-forged aluminium ahead stem with 4 screw handlebar clamping, 6° rise and 25.4 mm clamping diameter.

Stable, 3D-forged aluminium ahead stem with 4 screw handlebar clamping, 20° rise and 25.4 mm clamping diameter.Specifications:- Material: AL 6061 T6- Weight: 215 g- Fork clamp: 28,6 mm- Extension: 90 mm- Clamp height: 40 mm- Angle: 20°- Actual height gain: 50- Actual length gain: 80- Clamp: 25,4 mm

XR2.0 stems are designed with a low stack height and negative rise for mountain bikers looking for a low handlebar position. The optimized aluminum construction achieves the perfect balance of strength, stiffness and weight. 3D forged from 7075 alloy and a broad four-bolt face plate design creates a better distribution of stress and lowers the clamping force required to secure the handlebar.Features:- Designed for mountain use- Forged and machined AL6061 body- 4-bolt face plate helps distribute clamping load- Corrosion-resistant Torx T25 steel bolts- Compatible with all 31.8 bars- 1 1/8´´ steerer- incl stem topcap and bolt- Lengths: 50-90mm- Angle: -8°Specifications:- MATERIAL: Alloy AL6061- ANG…

Specifications:- Extension: 70- Angle: +/-6°- Clamp-D: 28,6- Clamp-H: 40- Material: AL 6061 T6- Weight: ~115 g

The ahead stem, made of 3D forged aluminium, 4x bolted handlebar clamp and a closed steerer clamp, is not only convincing in its design but also in terms of stability (Safety Level 5). Headlights or minicams from various manufacturers can be individually attached to the front of the stem with the optionally available faceplate.Specifications: - Clamp: 31,8 Mm- Safety Level 5- Material: Al 6061 T6- Fork Clamp: 28,6 Mm- Extension: 50 Mm- Clamp Height: 40 Mm- Angle: 35°- Actual Height Gain: 45- Actual Length Gain: 40- Weight: ~180 G

Specifications:- Safety Level: 5- Extension: 90- Effective Length: 60- Angle: 45°- Effective Height: 80- Clamp-D: 28,6- Clamp-H: 40- Material: AL 6061 T6- Weight: 190g

Specifications:- Safety Level: 5- Extension: 90- Effective Length: 60- Angle: 45°- Effective Height: 80- Clamp-D: 28,6- Clamp-H: 40- Material: AL 6061 T6- Weight: 190g

The Xm1.5 Is Designed For Aggressive Technical Riders For Use With An 31.8mm Bar For The Strongest Setup.Features:- Designed For Aggressive Technical Trail Riding- Forged And Machined Al2014 Body- Wide 4-Bolt Face Plate Helps Distribute Clamping Load- Corrosion-Resistant Torx T25 Steel Bolts- Compatible With All 31.8mm Bars- 1 1/8´´ Steerer- Lengths: 40-50mm- Angle: 2°Specifications:- Material: Alloy Al2014- Angle: 2°- Clamp Diameter: 31.8mm- Steerer Diameter: 1 1/8´´- Weight: 165g (50mm)

Probably the best-selling quill stem in the history of cycling, certainly the most imitated, returns 99% identical with micro thickness changes that allows it to satisfy the latest European standards.The anodized finish is the mythical Milky.Good-to-use, beautiful to see and touch:Multisensorial Classic Design.Sizes:90-100-110-120-130 mm.Clamp diameter:26 mm.Stem angle:73°.Weight:285 g/110.Material:Aluminum 6066 T6.Finishing:Milky Finish Anodized.

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish

Road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components we've had amazing success with our pro level athletes in all disciplines. While the successes have been proving, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems and seatposts.…

The stem is made of aluminum with “headlock” mount. Suitable for racing, trekking or MTB.
Lenght: 80 mm
Sweep: +/- 6 °
Height: 40 mm
Diameter: 1-1/8" (28,6 mm)
Handlebar: 1-1/4" (31,8 mm)
Rise: 6°
Material: Aluminium
Colour: Black
Made in: China
Length (mm): 80.0
Diameter (mm): 31.8

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish

PRO LT Stem A simple and stylish stem perfect for helping adjust your bike fit without breaking the bank, the PRO LT Stem is a great option for upgrading your cockpit.  With a +6/-6 degrees of rise depending on which side you run the stem, you can get low and minimise drag or elevate posture to increase comfort on longer endurance rides.  PRO uses a 6061 aluminium for its high strength properties and to make use of aluminium's ability to give a smooth ride feel as it reduces road buzz through your handlebars.  

The Atmos 7k stem is a lightweight, performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, it is also available in 6 different lengths depending on your sizing needs. All fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.Specifications:- Brand: Truvativ- Model: Atmos A1- Stem angle/rise: 6 degrees- Length (st): 40mm- Clamp diameter: 31.8mm- Steerer clamp diameter: 1-1/8 in- Material (sp/st): AL-7050- Hardware: Steel

Basic, clean, and dependable performance – that's the Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer's shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch.Features:- 3D forged and CNC machined from AL6061/T6- 4-bolt cold forged front clamp diameter- Chromoly hardware- Bead blasted anodized black- Laser graphicsSpecifications:- Series: GOSSAMER- Discipline: ROAD, GRAVEL- Material: Alloy- Weight (gr): 144- Angle: 6°

The Atmos 7k stem is a lightweight, performance stem designed for trail and cross-country use and is the lightest stem in the Atmos range. Featuring a rise or drop of 6° depending on your preference, it is also available in 6 different lengths depending on your sizing needs. All fasteners are adjustable via a T25 tool for easy, quick adjustments. The Atmos 7k also features an integrated GoPro mount.Specifications:- Brand: Truvativ- Model: Atmos A1- Stem angle/rise: 6 degrees- Length (st): 40mm- Clamp diameter: 31.8mm- Steerer clamp diameter: 1-1/8 in- Material (sp/st): AL-7050- Hardware: Steel

Specifications:- Angle: -20 - +40°- Effective Height: -30/0/55- Clamp-D: 28,6- Clamp-H: 45- Material: AL 6061 T6- Weight: ~295 g

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish

With its unique faceplate design, the Ritchey 4-Axis stem was a game-changer when it was first released many years ago. Today, the Comp 4-Axis-44 stem offers a wider 44mm faceplate and continues to offer world-class performance and unparalleled reliability that's unmatched at a similar price-point. This stem also features a new aesthetic with updated Comp graphics for 2020.FEATURES:Designed specifically for 1-1/8 steerer44mm-wide faceplateStylish new Comp graphics Material: 6061 alloyStainless Steel faceplate boltsAngle: 84°/6°Bar Clamp: 31.8mmSteerer: 1-1/8Steerer Height: 44mmFaceplate Width: 44mmWeight: 155g (120mm)

The Ahead Stem, Made Of 3d Forged Aluminium, 4x Bolted Handlebar Clamp And A Closed Steerer Clamp, Is Not Only Convincing In Its Design But Also In Terms Of Stability (Safety Level 5). Headlights Or Minicams From Various Manufacturers Can Be Individually Attached To The Front Of The Stem With The Optionally Available Faceplate. >>See Stem Accessories.Specifications: - Clamp: 31,8 Mm- Safety Level: 5 - Material: Al 6061 T6- Fork Clamp: 28,6 Mm - Extension: 50 Mm- Clamp Height: 40 Mm - Angle: 35°- Actual Height Gain: 45 - Actual Length Gain: 40- Finish: Silver Polish - Weight: ~180 G

2-piece faceplate for deda zero2 stem. A perfect balance between engineering and design. The perfect component for high performance road bikes. The only deda stem available in extra short size 50 and 60 mm. Available in two different finishes, polish on black (pob) and team finish.Specifications:- Material: Alloy 6061, 3d forged- Screws: CrMo- Angle: +-7°- Handlebar diameter: 31.7 mm- Fork steerer: 1 1/8´´ (28.6mm)- Drop: 38mm- Clamp Height: 100 mm, 110 mm, 120 mm, 130 mm, 50, 60, 70, 80, 90 mm- Weight(110m): 140g- Finish: POB polish on black, Team finish