PC adapters

10-In-1 Usb-C Dock

9 In 1 Usb-C Multiport Dock

If your new graphics card has more 6pin PCIe connector requirements than your own power supply has connections to offer, then an appropriate adapter is required in order to still achieve the required number of PCIe connectors.The most common which is often included with the graphics cards which is two Molex plugs to PCIe. However, there are other possibilities. In this variant, the power for the graphics card comes from a pair of SATA connectors that usually power SATA drives. Two 15-Pin SATA are converted to a 6pin PCIe. Particularly useful when no more connections are free.Specification- Connectors: 2 x 15-Pin SATA power (in), 1x 6pin PCIe (out)Cable length: approx. 15 cm

Single 4pin PSU molex to two 15pin SATA power connectors. Enables connection of two SATA devices to standard 4pin Molex of the PSU.- Provides 2 additional SATA power connectors- 4pin PSU molex to 2x 15pin SATA power- 30cm long

Convert PSU 4 pin ATX connector to 8 pin ATX connector 4-pin ATX 12V female to 8-pin (4+4) male power adapter cable with black sleeve.Length:15cm

Mounting adapter allows a 3.5" device, 3.5" HDD or 2.5" SSD/HDD to fit into a 5.25" PC drive bay.

This mounting adapter allows for installing single 2.5" or 3.5" disk drive into a 5.25" PC drive bay. Anti vibration pads eliminate HDD vibration and prevent structure born noise and resonance. It is suitable for all SDD and HDD IDE PATA/SATA drives.

USB 3.0 19-pin female to USB 2.0 internal 9-pin male, 30cm in length

- Convert M.2 SSD to work in main board PCIe x4 bus slot
- Support 2230 2242 2260 2280 and 22110 size PCIe SSD
- Design for M.2 PCIe "M Key" SSD
- Optional Low-profile bracket

This cable adapter converts a 6-Pin PCI-E connector to an 8-pin ATX12V CPU connector. It provides support for dual and quad processor motherboards from a standard ATX power supply.- 6-Pin PCI-E to 8-Pin ATX12V adapter- Updates PSU compatibility with dual and quad processors systems- Quality connectors for safe connection

Additional connector for 4pin peripheries, converts 15pin SATA PSU power to 4pin PSU Molex connector, designed for ITX and ATX power supplies without sufficient number of 4pin Molex power connectors, length: 10cm.- Additional connector for 4pin peripherals- Converts SATA to 4pin Molex- Length: 10cm

The Akasa USB 3.1 Gen2 Type-C adapter is equipped with a modern USB 3.1 Type-C plug , which is integrated into a PCI slot panel. It connects to an internal USB 3.1 slot with a 50-centimeter cable. This makes it possible to use an otherwise idle slot for connecting external devices. The symmetrical connector Type C makes the tedious turning of the USB connector superfluous. In addition, compared to USB 3.0, this USB 3.1 port has double the transfer rate from 5GBit/s to 10GBit/s. USB 3.1 is backwards compatible and can also use USB 2.0 devices (With a Type C to USB 2.0 Adapter).SPECIFICATIONS:- Space requirements: 1 x PCI slot panel- Color: Black- Internal connection: 1 x USB 3.1 Type C (Male)- …

ALOGIC 3-in-1 USB-C to HDMI DVI VGA Adapter - Male to 3-Female

The ALOGIC Premium DVI-D (M) to HDMI (F) Adapter is used to convert a DVI-D signal to HDMI signal. The adapter is bi - directional and also works to convert a HDMI signal to a DVI-D signal. The ALOGIC premium adapter is built with with highest quality material for best in class performance. Meets and exceeds ALOGIC's Life Time Warranty quality assurance standards.

The U30AS25 USB 3.0 to SATA adapter cable allows to connect a 2.5" SATA hard drive or solid state drive to your computer through an available USB port providing the easiest way to upgrade the hard drive in your laptop by adding an external SSD via USB 3.0. U3 AS25 supports UASP allowing for transfer speeds up to 7 % faster than conventional USB 3.0 which enables you to utilize the full potential of your SATA III SSD/HDD when paired with a UASP-enabled host controller.This adapter has a compact design with no requirement for an external power source for easy storage and on the go use. Plus the cable-style adapter makes it easy to swap between hard drives without having to install your drives …

Access and download recorded media of your SATA SSD/HDD used in recorders such as Blackmagic Designs HyperDeck Studio HyperDeck Shuttle Cinema Camera URSA Mini and URSA Mini Pro; ATOMOS Shogun Ninja Blade Ninja Assassin and Sumo; Sound Devices & Video Devices; and more.

Reformatting and cleaning SSD/HDD storage media
Back up your valuable data to an external SATA storage
Retrieve data stored on an old 2.5 and even access old 3.5 SATA drive by connecting additional 12V power
Access any 2.5 SSD/HDD with your latest USB 3.1 Gen 2 Type-C drive at full 6Gb/s SATA III speed
High speed data immigration or drive cloning

Options that provide additional monitoring and control functionality

Includes: User Manual