Other Components

The EK-RGB Extension Cable allows users to extend one RGB source so that they can build an aesthetically beautiful lighting system. It features standard 4-pin RGB headers and the male-male connector pins are also included in the packaging. The extender cable can be used with any standard 4-pin 12V RGB controller or any of popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 4-pin LED connector is to be aligned with the +12V marking on the RGB header.Please refer to motherboard manufacturer manual or RGB controller manufacturer manual for LED type compatibility, maximum power load and maximum allowed LED strip length.Technical and electrical specifications:- …

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque HDC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque HDC 16 fittings are EK's new minimalistic 16mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-UNI Pump Bracket (120mm FAN) Vertical is a vertical mounting adapter for installation of Laing D5 powered EK-XTOP Revo D5 and EK-XRES Revo D5 units to any 120mm fan hole pattern application. It can be used for both vertical and horizontal position.Made from press-bent 1,5mm thick painted steel.Compatibility- EK-XRES Revo D5 series (any)- EK-XTOP Revo D5 series (any)- EK-XTOP DDC series (any)Contents:- EK-UNI Pump Bracket (120mm Fan) Vertical- 5x polyamid washer M4 0,8- 5x screws M4x6 DIN7984- 5x nut M4- Allen key 2,5Made in Slovenia - Europe!

EK-UNI Pump Bracket (140mm FAN) Vertical is a mounting adapter for installation of Xylem D5 powered EK-XTOP Revo D5 and EK-XRES Revo D5 units to any 140mm fan hole pattern application. It can be used for vertical and horizontal position.Compatibility- EK-XRES Revo D5 series (any)- EK-XTOP Revo D5 series (any)- EK-XTOP DDC series (any)Contents:- EK-UNI Pump Bracket (140mm Fan) Vertical- 5x polyamid washer M4 0,8- 5x screws M4x6 DIN7984- 5x nut M4- Allen key 2,5

EK-XTOP DDC 3.2 PWM Elite - Plexi (incl. pump) is a High-Performance water cooling pump. The core of the unit is the market-proven EK-DDC 3.2 PWM water pump (4-pin PWM FAN header). This unit offers increased hydraulic performance (up to 15 %) compared to original factory top.PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode!This top features two G1/4 threaded ports of which one is an inlet on top and one is an outlet on the side of the unit. EK recommends EK-ACF series compression fittings.Despite a remarkably small footprint of 2.4" square, the pump features an astounding 7m of head to …

EK-XTOP Revo D5 PWM is a high-performance liquid cooling pump, built around the market-proven Xylem D5 PWM water pump and revolutionary EK-XTOP Revo D5 pump volute/body with the revolutionary vibration-reducing mounting clamp. This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. This pump is ideal for PC and other electronics water cooling. The D5 pump is equipped with an electronically commutated spherical motor. In a pump with a spherical motor, the only moving part is a spherically shaped rotor which in this pump is held in place by a bearing ball made of ultra-hard and wear-resistant ceramic. Rated 50.000 hrs MTBF at 25°C ambient! The new D5 R…

EK-XTOP Dual D5 PWM Serial is a fourth generation high-performance aftermarket DUAL pump top (volute) for D5 type water pumps. The EK-XTOP Revo Dual D5 PWM Serial comes pre-installed with two (2) EK-D5 PWM water pumps operating in series.Using two water pumps in series provides almost twice the head pressure of a single water pump and also guarantees top safety measure - in the case of one pump fails the remaining one will provide sufficient liquid flow to prevent any hardware damage due to overheating. Additionally, there is no downtime until next scheduled maintenance. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper …

EK-Loop HD Tube is solid type extruded acrylic tubing intended to be used with EK-HD Adapter fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer. Specification: - Inner diameter: 12 mm - Outer diameter: 16 mm - Length: 500 mm (19.5") The package contains 2 pieces of tube only. Please purchase EK-HD Adapter fittings separately! Made in Slovenia – EU! For easier installation we recommend wetting the gasket (O-ring) using drops of water prior to installing solid tube.

EK-Loop DDC 4.2 PWM Motor is a high-performance water pump with power management control (via PWM - pulse width modulation) of rotation speed through motherboard BIOS or a dedicated fan controller. The main difference to a DDC 3.2 PWM is the black cabling, SATA power connector instead of MOLEX, and 32-bit communication.This pump features 3/8" (10mm) non-removable plastic barbs to support any 10mm ID tubing and is compatible with any EK-Quantum Kinetic TBE DDC, and FLT DDC pump-res combo units. EK highly advises using a Convection heatsink to even further prolong the lifespan of this pump.Despite a remarkably small footprint of 2.4" square, EK-Loop DDC 4.2 PWM features an astounding 5,2m of head …

The EK-Loop Leak Tester Flex is a fast and safe way of testing for possible leaks in your liquid cooling loop. While traditional leak testing works, it requires hours before very small leaks are detected and then things can become messy. The EK-Loop Leak Tester Flex does the job within minutes.This product has a flexible tube on one end, allowing you to easily reach any port in your loop and avoid stressing it when pumping. It is fitted with a revolvable male G1/4” connection port so it can be directly screwed into any standard G1/4” port in your liquid cooling loop. The other end is hooked up with a non-return valve which will make sure that no air is escaping through the tester …

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored …

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

Replacement inner O-ring gaskets for EK Hard Tube Compression (HDC) 14mm OD fittings.The package contains 6 pieces of OR 14,1x1,6 NBR70.These O-ring gaskets are compatible with the following fitting lines:EK-Quantum Torque HDC 14EK-Classic HDC 14

Replacement inner O-ring gaskets for EK Hard Tube Compression (HDC) 16mm OD fittings.The package contains 6 pieces of OR 16,1x1,6 NBR70.These O-ring gaskets are compatible with the following fitting lines:EK-Quantum Torque HDC 16EK-Classic HDC 16

Replacement outer O-ring gaskets for EK fittings and angled adapters.Package contains 6 pieces of OR 12x2.These fittings are compatible with following fitting lines: EK-HDC 16mm EK-ACF 10/13mm EK-ACF 10/16mm EK-ACF 13/19mm EK-ACF 12/16mm EK-HD Adapter 12/16mm EK-Coolstream extenders EK-ACF 10/16mm

EK-XTOP DDC 3.2 PWM Elite - Acetal (incl. pump) is a High-Performance water cooling pump. The core of the unit is the market-proven EK-DDC 3.2 PWM water pump (4-pin PWM FAN header). This unit offers increased hydraulic performance (up to 15 %) compared to original factory top. PWM control allows for automatic pump speed regulation depending on your CPU temperature. Full performance on demand or whisper quiet operation in idle mode! This top features two G1/4 threaded ports of which one is an inlet on top and one is an outlet on the side of the unit. EK recommends EK-ACF series compression fittings. Despite a remarkably small footprint of 2.4" square, the pump features an astounding 7m of …

DetailsEK-ATX Bridging Plug (24 pin)- Ideal for use with 12v Water Pumps to power up without mainboard power.- Fits 24 Pin ATX PSU's

EK-Quantum Flow Indicator D-RGB is a premium flow indicator with addressable RGB implementation belonging to the Quantum Line. It visually represents the coolant flow rate, which is often hard to see with the naked eye. This can be very useful to instantly see if your loop operation is nominal or there's trouble with the pump or flow in some other area. Aside from that, it's very stylish making it a very nice aesthetic detail to have in your loop. It features three G1/4" ports, all of which are female. It can be mounted mid tube run with two fittings or fastened to any G1/4" port on a radiator, pump, or even a block via the use of a dual male-threaded extender. Any of the threads can be used …

EK-Quantum Inertia D5 PWM D-RGB is a high-performance liquid cooling standalone pump, built around the market-proven Genuine D5 water pump and the new Quantum Inertia top with an advanced vibration-reducing mounting clamp. This unit offers increased hydraulic performance (up to 15%) compared to the original factory top and it comes with a pre-installed 3-pin 5V D-RGB LED strip for sophisticated illumination. This pump features a single inlet (on the top) and a single outlet port (on the side) for the installation of two standard G1/4 threaded fittings/barbs. The top is made of quality CNC-machined cast acrylic material with a black ring to cover the LED hotspots as the proper LED implementation …

EK-Quantum Inertia D5 PWM D-RGB is a high-performance liquid cooling standalone pump, built around the market-proven Genuine D5 water pump and the new Quantum Inertia top with an advanced vibration-reducing mounting clamp. This unit offers increased hydraulic performance (up to 15%) compared to the original factory top and it comes with a pre-installed 3-pin 5V D-RGB LED strip for sophisticated illumination. This pump features a single inlet (on the top) and a single outlet port (on the side) for the installation of two standard G1/4 threaded fittings/barbs. The top is made of CNC machined black POM acetal with a milky white ring to diffuse the LED hotspots as the proper LED implementation is …