PC adapters

The ICUSB2322F 2-Port USB to Serial RS232 Adaptor Cable with ftDI chipset and COM Retention converts an available USB 1.1 or 2.0 port into 2 RS232 serial DB9 ports to connect, monitor and control your serial devices. This compact Adaptor features COM retention, allowing the same COM port values to automatically be re-assigned to the port if the cable is disconnected and re-connected to the host computer, or if the system is rebooted. Unlike most USB-serial adapters, this one uses the ftDI chipset, which supports additional customization, advanced features, and compatibility not necessarily offered by other solutions. This USB-serial Adaptor is compatible with a broad list of Operating Systems,…

This RS232 Serial Adapter Card lets you add two RS232 (DB9) serial ports to your computer through a PCI Express (PCIe) slot. It enables you to interact with serial devices, such as card readers, printers, PIN pads, and modems, at speeds of up to 921.4Kbps.Maximum Compatibility:- With broad OS support, including for Windows and Linux, this PCI Express card is easy to integrate into mixed environments. The card comes pre-configured with a low-profile bracket, and includes an optional full-profile bracket, so installation is easy regardless of the case form factor.Experience Optimal Technology:- This PCIe to serial adapter supports the following features:Compatible with industry standard 16950 …

This CompactFlash Card to IDE Adaptor is a perfect solution for accessing CompactFlash (CF I, CF II) and IBM Micro Drive media, allowing you to access the flash/micro drive media as if it were an IDE hard drive. The CF/IDE Adaptor can be installed in the computer case through simple mounting in an available 3.5 inch drive bay, for connection to the computer IDE bus through either a 40 or 44-pin connection.

Mount a 3.5in hard drive to any desktop with an available 5.25in bay

This Drive Bay Mounting Bracket Kit lets you mount a 3.5in Hard Drive in a 5.25in drive bay allowing you to maximize the internal space-efficiency of your computer case. Backed by StarTech.com's 2-year warranty.

The StarTech.com Advantage

- Durable all metal construction for mounting any type of 3.5in device into a 5.25in bay
- Backed by a StarTech.com 2-year warranty and free lifetime technical support

Desktop Front Bay AdapterThis front bay mounting bracket lets you install a 3.5" floppy drive media card readers or other peripherals into a 5.25" front bay of your desktop computer.A Versatile Desktop SolutionThe 3.5 to 5.25 front bay adapter provides a versatile solution that lets you install a 3.5" floppy drive external facing USB hubs media card readers and fan controllers into the front bay of your PC computer with ease.The adapter bracket features an attractive open-faced black bezel that provides a secure fit.The TAA compliant BRACKETFDBK is backed by a StarTech.com 2-year warranty and free lifetime technical support.The StarTech.com Advantage

The ICUSB232SM3 3ft USB to Serial Adapter Cable lets you connect DB9 RS232 serial devices to your Mac® or PC laptop or desktop computer through an available USB port, as though the computer offered an onboard DB9M connector. Unlike typical USB to serial converter cables where the conversion takes place at the DB9 end, the StarTech ICUSB232SM3 features a converter chip on the USB end.Converting at the USB source overcomes the 15ft.technical limit of USB cables, allowing for a much greater serial DB-9 extension cable (50ft.+ is possible depending on the application) if necessary. Simple to install and use, this USB to Serial adapter is a cost-effective solution that bridges the compatibility g…

This USB to Parallel Interface Converter Cable allows PCs that support the USB specification to print to any standard parallel printer. The USB interface provides a much faster data transfer rate than a standard parallel port, thereby reducing the time waiting for a print job to be sent to your printer. This portable device is self-powered and provides Plug and Play installation to any USB-compliant computer running Windows 98/ME/2000/XP/Vista.

This 6 inch LP4 to P4 Auxiliary Power Cable Adaptor turns a female LP4 connector into the male P4 connector needed for connecting to a Pentium 4 motherboard. This cable adapter is constructed of top quality materials and designed for durable performance, the LP4 to P4 auxiliary power cable is backed by StarTech.com's Lifetime Warranty.

The ICUSB2328I Industrial 8-Port USB to Serial Hub with DIN Rail Clips converts a single USB port into eight RS232 serial ports, enabling you to connect to, monitor and control your serial devices. Featuring rugged metal construction, with sturdy wall-mounting brackets and top-hat DIN Rail clips (included), this 8 port USB to RS232 Serial Hub provides versatile mounting options and a robust solution for both harsh industrial environments and simple desktop installations. This USB powered adapter also retains assigned serial COM port values once connected, allowing the same values to be automatically reassigned to the USB serial hub ports. Backed by a StarTech.com 2-year warranty and free lifetime …

Add extra COM ports to your laptop or desktop computer, quickly and easily. This USB to RS232/422/485 serial adapter lets you connect to your serial devices through an external USB port. The versatile serial adapter converts a single USB port into eight RS232/RS422/RS485 serial ports, enabling you to connect, monitor, and control a wide range of serial devices, such as sensors, barcode scanners, and LED signage. It supports four operating modes, including RS232, RS422, 4-wire and 2-wire RS485. With its rugged IP30-rated metal hub housing, the serial adapter is built to meet the extreme demands of harsh and mission-critical environments. It provides 15 kV ESD protection, which helps to reduce …

Heres an easy and cost-efficient way to add RS232 serial capability to your industrial setting. This 16-port USB-to-serial adapter hub features a sturdy rack-mountable chassis and supports daisy chaining so you can connect multiple hubs together to increase your serial device port count.

A scalable solution for changing needs
This rack-mountable USB serial hub (FTDI) lets you add 16 serial ports (RS232) with full control from your desktop or laptop computer system using a single USB port. The daisy-chain function gives you a cost-effective and scalable way to increase your serial port count and expand as your needs grow without investing in a higher cost serial hub.

Providing full control …

Add A Usb-Based Rs232 Serial Port To Your Laptop Through An Expresscard SlotThe Ec1s232u2 Expresscard Rs232 Serial Adapter Card (Usb-Based) (16950 Uart) Adds An Rs232 (Db9) Serial Port To Your Expresscard-Equipped Laptop Enabling You To Connect An Rs232 Serial Peripheral Device Such As A Plotter Digital Signage Device Receipt Printer Or Bar Code Scanner Through An Available Expresscard Slot.This Usb-Based Expresscard Supports Rs232 Serial Data Transfer Rates Up To 460 Kbps And Eliminates The Need To Upgrade Serial Peripherals To More Modern Interfaces (E.G. Usb Etc.) For The Sake Of Host Compatibility Saving Both Expense And Hassle.Backed By A Startech.Com Lifetime Warranty And Free Lifetime …

Add A Usb 3.0 Port Connection That Inserts Flush Into A Laptop Expresscard SlotThe Ecusb3s11 Flush Mount 1-Port Usb 3.0 Expresscard Lets You Add A Single Usb 3.0 Port Connection To Your Laptop Through An Expresscard Slot.The Usb 3.0 Adapter Uses A Unique Form Factor Design That Allows It To Sit Fully In A Standard 34Mm Expresscard Slot Without Sticking Out. The Port Sits Virtually Flush With The Sides Of The Laptop Enabling You To Leave The Card Installed Even While On The Move Without Fear Of Damage To The Card Or Slot.Enhanced With Uasp Support (Usb Attached Scsi Protocol) This Usb 3.0 Controller Performs Up To 70% Faster Than Conventional Usb 3.0 When Paired With A (Note: Uasp Requires A …

The ICUSB232INT1 USB to RS232 Serial Adaptor lets you add an RS232 port to any desktop system that is equipped with an available USB motherboard header. Unlike standard USB to serial cables, this cable is designed for use inside the PC case, affording an entirely internal solution with no mess or extra adapters needed. This compact and simple USB Adaptor offers a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals.

The ICUSB232INT2 USB to Serial Adapter lets you add 2 RS232 ports to any desktop system that is equipped with an available USB motherboard header.

Unlike standard USB to serial cables this cable is designed for use inside the PC case affording an entirely internal solution with no mess or extra adapters needed.

This compact and simple USB adapter offers a cost-effective solution that bridges the compatibility gap between modern computers and legacy serial peripherals.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage
- Direct connection from the motherboard header allows for a clean and completely contained setup without taking …

Convert An Msata Mini-Ssd Into A Standard 2.5In Sata SsdThe Sat2msat25 2.5In Sata To Mini Sata Ssd Adapter Enclosure Turns An Msata (Mini Sata) Mini-Ssd Into A Standard 2.5In Sata Ssd For Use Anywhere A 2.5In Sata Drive Can Be Used.To Maximize Performance And Utilize The Full Speed Potential Of Your Sata Iii Hard Drives This Hdd Backplane Supports Sata Iii For Transfer Speeds Up To 6 Gbps When Paired With Compatible Controller.Featuring All Of The Standard Mounting Points That A Normal 2.5In Hard Drive Uses The Converter Can Be Installed Into External Hard Drive Enclosures Hard Drive Docking Stations Or Into Desktop Or Laptop Computers. The Enclosure Also Features A Unique Design That Enables …

Add 2 FireWire800 ports to a laptop through an ExpressCard slot

This 2 Port ExpressCard FireWire Adapter Card adds two 1394b FireWire ports to a laptop computer providing a cost-effective way to add IEEE 1394A and IEEE 1394B FireWire devices even if the laptop doesnt have a built-in FireWire 400 or FireWire 800 port.

Simply insert the IEEE 1394B FireWire 800 card (EC1394B2) into an ExpressCard slot and youll be able to connect a broad range of FireWire devices to your laptop while relying on data transfer speeds of up to 800Mbps.

Plus the card is backward compatible with 1394a devices so you can connect both FireWire 400 and 800 devices to the notebook using the same adapter.

The …

Add 2 Usb 3.0 Ports To A Laptop Through An Expresscard SlotThe Ecusb3s22 2-Port Expresscard Usb 3.0 Card Adds 2 Superspeed Usb 3.0 Ports To An Expresscard-Enabled Computer System Using A 34Mm Form Factor That Will Fit In Both 34Mm And 54Mm Slots Along With Ports Mounted Side-By-Side For Easy Access.Enhanced With Uasp Support (Usb Attached Scsi Protocol) This Usb 3.0 Controller Performs Up To 70% Faster Than Conventional Usb 3.0 When Paired With A (Note: Uasp Requires A Compatible Operating System). Using A More Efficient Protocol Than The Traditional Usb Bot (Bulk-Only Transport) Uasp Technology Optimizes Transfers By Allowing Multiple Commands To Be Processed Simultaneously Significantly Increasing …

The ICUSB2322I 2-Port Industrial USB to Serial Hub with DIN Rail Clips converts a single USB port into two RS232 serial ports, enabling you to connect to, monitor and control your serial devices. Featuring rugged metal construction, with sturdy wall-mounting brackets and top-hat DIN Rail clips (included), this USB to Serial Hub provides versatile mounting options and a robust solution for both harsh industrial environments and simple desktop installations. This USB powered Adaptor also retains assigned serial COM port values once connected, allowing the same values to be automatically reassigned to the ports provided by the adapter. Backed by a StarTech.com 2-year warranty and free lifetime …

Add 2 High-Speed Ieee 1284 Parallel Ports (Epp/Ecp/Spp/Ps2) To Your Desktop Computer Through A Pci Express Expansion SlotThe Pex2pecp2 2 Port Pci Express Parallel Adapter Card - Epp/Ecp/Spp/Ps2 Parallel Card Adds Two Ieee 1284 Parallel Ports To Your Pc With Support For Parallel Data Communication At Speeds Of Up To 1.5 Mbps.This High Performance 2 Port Pci Express Parallel Card Adds 2 Db25 Parallel Ports Perfect For Connecting Printers Scanners Memory Card Readers Bar Code Scanners And More. With The Added Convenience Of Plug-And-Play Capability Installing The Parallel Adapter Card Is Hassle-Free. The Pcie Parallel Card Also Includes Both Standard And Half-Height/Low Profile Mounting Brackets …

The USB3SPLATE 2-Port USB 3.0 A Slot Plate converts the USB pins on the USB 3.0 motherboard header to 2 standard USB 3.0 A-type ports. The plate can be mounted on the rear panel of a computer case adding two USB 3.0 A female ports for simple connection to USB peripheral devices.

The USB 3.0 standard supports transfer rates of up to 5Gbps and provides connectivity and support for older USB 2.0 (480Mbps) and 1.1 (12Mbps) devices.

The StarTech.com Advantage
Adds two USB 3.0 ports for faster transfer rates with USB 3.0 devices while still supporting USB 2.0 and USB 1.1 devices
Easy to use and install
Backed by StarTech.com lifetime warranty

This 2 Port USB A Female Low Profile Slot Plate converts the USB pins from most AT style Pentium (and newer) motherboards to 2 standard USB A style ports. The plate can be mounted on the rear panel of a computer case, adding two USB A female ports for simple connection to USB peripheral devices.

This Usb A To Usb Motherboard 4-Pin Header Plugs Directly Into A Motherboard Usb Header Providing Two Standard Usb A Female Ports.A Cost-Effective Solution For Any Application Requiring Internal Usb 2.0 Female Ports Including Using A Bootable Usb Flash Drive As A Ssd Or Collecting Data In Embedded Applications.The Startech.Com Advantage- Converts A Motherboard Usb Connector Into Two Usb A Female Ports- Easy To Use And Install- Backed By Startech.Com's Lifetime Warranty

The ICUSB2324852 2 Port USB to RS232 RS422 RS485 Serial Adapter with COM Retention lets you connect every type of serial device to your USB-enabled computer whether it be for RS232 RS422 or RS485 communication. The adapter features a 9-pin (DB9) male and a 5-pin terminal block serial connector as well as dip-switch controls for easy port configuration with minimal software requirements. The adapter also supports using 2 ports simultaneously including with mixed protocols; for example RS-232 on port 1 and RS-485 on port 2 or a number of other combinations.

For a convenient and clean installation in office or industrial settings the RS232/RS422/RS485 USB Adapter is wall-mountable and fully …