Tripods

Camera Tripod / Spirit Level / Multiple Leg Angle Positions / Carbon / Tripod Head Type Video Tilt Head

Gitzo Lateral arms enable cameras to be positioned above or below the tripod apex in positions which might otherwise be obstructed by the tripod legs.
Both Rapid (sliding) and geared version are available.
Model: G535
For optimum rigidity, make sure to select a lateral arm with the same diameter as the tripod's outer section.

The basis for the modular professional model is the tripod shoulder TRIOPOD-PRO75, which is much more stable and resilient than that of the previous TrioPod tripods. The same applies to the much stronger, exchangeable carbon legs, which are available with 3 or 4 segments. The upper connection of the tripod legs has a diameter of 39 mm. Due to the reinforced construction of the individual components, the TrioPod PRO75 is suitable for the heaviest photo and video equipment. The maximum load is now 65 kg. FEATURES:- Weight: 1255g- Upper thread connection: 3/8 ´´- Side accessory connection: 2x 1/4 ´´sunk- Locking angle of the leg connections: 23 °, 45 °, 65 °, 87 °, 155 ° and 180 ° as well as a …

The MH057A5-LONG advanced panoramic photography head is built around the 300N pan rotation unit, with sliding plates for nodal point positioning and an elbow bracket to allow the camera to be mounted in either portrait or landscape orientation. It incorporates precise geared movements of the two sliding plates used to locate the camera over the panoramic axis of rotation, adding greater accuracy to nodal point positioning. The micro-positioning plates provide extremely precise fingertip adjustment via a gear drive system, a release button disengages the gear drive to facilitate rapid movement of the plates when required. The plates are also longer than those of the 303 head, which helps to make …

Compactness: with the 180° leg folding system pioneered by Gitzo, Which enables its legs to reverse-fold around the Centre column, the tripod is ultra-compact
Smoothness: centre Ball Head features independent Pan lock and a ball-movement control lock, with excellent smoothness, constructed with high-quality, high-resistance steel and aluminium components
Creative shots : with its 2 leg angles spread and the included short centre column, the tripod goes lower for low-angle or macro shots
Comfortable carrying: the included shoulder strap allows convenient switching between carrying and shooting. The tripod can be carried horizontally or vertically
Flexibility: arca-type compatible head plate…

Say hello to Bucky, one of the Legends Range of tripods brought to you by 3 Legged Thing. This adjustable carbon fibre tripod is one of the most versatile travel tripods you’ll ever find, offering photographers one of the largest dynamic working ranges whilst remaining easy to transport
Folding to just 41cm and weighing 1.87kg, Bucky is the perfect travel companion for professionals. With 5-section detachable legs and a triple section centre column that’s removable and reversible, Bucky can offer photographers incredible working heights from as low as 11cm up to almost 2m
Despite its lightweight construction, Bucky has the ability to support up to a staggering 30kg of camera equipment. It’…

Through the interchangeability of the legs, the set allows the flexible construction of the following tripod variants:Features: - 3-leg support with 148cm working height- 3-leg stand, mini-table stand or tripod for ground-level work- Monopod- ´´Leaning Pod´´ - Use of 2 Mini Legs and one of the longer legsSpecifications: - 4-segment Carbon Fiber legs, 8-ply- Extension leg length: 53 cm - 160 cm (20.9 - 63.4)- Max. Working height: 148 cm (58.3´´)- Min. Working height: 6,5 cm (2.6´´) (when using the exchangeable mini legs)- Upper thread connection: 1/4 ´´, interchangeable to 3/8´´- Side accessory connection: 1/4 ´´and 3/8´´- Resting angle of the leg connections: 20 °, 40 °, 60 ° and 87 °- Diamet…

Reverse folding design - The legs reverse fold creating a compact travel friendly tripod.
levelling Centre Column - A levelling base is attached to the top of the Centre column making it easy to quickly level the head independently of the tripod.
Removable Flat Base Head - The video head can be removed and used on other flat surfaces such as certain sliders, jibs, half ball adapters and more.
2-in-1 Column - The Centre column can be used as a long column for additional height and short column for low to the ground shots.
6-Step Counterbalance - The S6 PRO head has 6 stages of counterbalance (0-5) which helps to properly balance your camera rig.

Leofotos Summit range of tripods has been designed for users of larger, heavier cameras and lenses. TheLM-365Chas a carrying capacity of 25kg and a maximum height of 154cm. The tripod does not feature a ball head so that you can achieve a minimum height of just 8cm, can be folded down to 49cm and weighs just 1970g. Leofoto Summit LM-365C Tripod Leofotos Summit range of tripods has been designed for users of larger, heavier cameras and lenses. The LM-365C has a carrying capacity of 25kg and a maximum height of 154cm. The tripod does not feature a ball head so that you can achieve a minimum height of just 8cm, can be folded down to 49cm and weighs just 1970g. Strong and Lightweight The Leofoto …

COMPATIBILITY: The centre ball head comes with a Sony α plate for Sony α7 and α9 cameras, but can be mounted with an Arca-Swiss plate and works perfectly with all the Gitzo D profile plates
ULTRA-COMPACT: The Traveler tripod folds to occupy a small space, weighs only 1.43 kg and is a Gitzo premium travel tripod for demanding photographers who prefer Sony α cameras
VERSATILE: Even though it occupies very little space, it can be extended to a height of 165 cm. It can also be lowered to a height of just 43 cm from the ground, for macro shots or shots from below
STRONG: The carbon fibre structure of the tripod ensures extreme strength and safety while offering a small size. In fact, it can hold…