Car Subwoofers

Power Range: 150 W-350 W RMS RMS Power Handling: 350 W RMS Peak Power Handling: 1000 W PEAK Frequency Response: 30 Hz-200 Hz Material: Reinforced Parabolic Cone Structure with Poly-Mica Dust Cap & Pulp-Kevlar Cone Body

10" Protective Subwoofer Grill Works with Alpine SWA-10S4 Subwoofers Includes all Necessary Mounting Hardware

Cta-2031 specifications: 300w rms, 900w peak Alpine s-w8d2 s-series subwoofers Frequency response: 34hz-200hz Mounting depth: 3 3/4-inch

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

SSI (Selectable Smart Impedance): the exclusive dual impedance switch allows a variety of system configurations when one or more subwoofers are used International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

6-Inch 2-WAY CAR AUDIO COMPONENT SPEAKER SYSTEM 125 Watts Max Each Side, 25 Watts RMS Each Side Built to handle all bass levels down to the lowest frequencies 4 Ohms Impedance Frequency Response: 30 - 30,000 Hz High efficiency and low distortion

Premium low-frequency sound suited for the marine environment Water-resistant connectors for simplified installation and superior protection Rigorously tested marinized design with IP65 rating (Dust-tight. protected against low-pressure jets of water) Designed to optimally work with Fusion stereo systems and amplifiers (sold separately) with custom DSP profiles International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labeling or instructions.

Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness Alpine's Class D amplifier circuit with Dynamic Peak Power (D.P.P.) Speaker/RCA inputs (Selectable, High range=0.5-10V, Low range=0.2-4V)

On b W O or fe R 40hz-400hz Rear High Pass 50hz-1.5Khz Front high pass 50hz-7.5Khz.

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

20cm (8) Active Underseat Subwoofer. Power: 150/300 Watts RMS/MAX Class-D. low pass 50-120 Hz. bass boost 0-12db @ 45 Hz. high/low level input. auto-on (audio/DC offset). phase shift 0-180°. includes PLC bass remote control. dimensions: 36.5 x 23.8 x 8.5 cm

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

Bundle includes: 2 Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak Dual linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel plated push terminals Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)

Sensitivity SPL (1W / 1m) 86 dB, Resonant Frequency 44 Hz Poly Injection Cone, 2 Inch Copper Voice Coil, Rubber Surround Sealed Enclosure Internal Volume: .75 Cubic Feet 3.9 Inch Mounting Height, 11 Inch Mounting Hole Diameter Dimensions: Depth 13” x Width 13” x Height 4.5”