Car Subwoofers

Gehäusesubwoofer

20 cm (8”) dual voice coil subwoofer (2 Ohm + 2 Ohm) 180 Watt peak power handling / 60 Watt RMS power handling Frequency response: 34Hz – 1,5kHz Includes installation brackets for Mercedes Sprinter 907 / 910 under-seat installation

Protect your investment with the stylish and tough KTE-8G grille for 8" Alpine Type-R subwoofers. Brand: Alpine Model number: KTE-8G

30 cm marine subwoofer. load capacity: 200 watts rms / 400 watts max. Impedance: 4 + 4 Ohm. Fs 28.5 Hz, Qts 0.59, VAS 107.7 litres. Sound pressure: 89 dB. Xmax: 7 mm. Black grid. Polypropylene membrane with UV protection, black. Aramid fibre resistant to moisture, cracks, wear and tear. Can be used in closed, bass reflex or free air. Installation depth: 122 mm. Installation opening: 2 mm. 76 mm.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Protects against surround and cone damage. Sized to fit Gen-3 P2 & P3 woofers. Stamped mesh grille insert.

Boss R935, 5-Channel Mosfet Power Amplifier, Riot Series + Subwoofer Remote Control, 4 x 80 Watts RMS + 1 x 150 watts @ 4 ohms stereo, 4x 150 Watt RMS + 1 x 300 Watts @ 2 ohm stereo

2) NEW ROCKFORD FOSGATE **R2D4-12** 12" 1000W 4-Ohm DVC Prime R2 Car Audio Subwoofer Power Handling (Max): 500 Watts per sub (1000 Watts per pair) Power Handling (RMS): 250 Watts per sub (500 Watts per pair) Features: 12-gauge compression terminals

20cm (8) Active Underseat Subwoofer. Power: 150/300 Watts RMS/MAX Class-D. low pass 50-120 Hz. bass boost 0-12db @ 45 Hz. high/low level input. auto-on (audio/DC offset). phase shift 0-180°. includes PLC bass remote control. dimensions: 36.5 x 23.8 x 8.5 cm

Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass. Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily …

1000 Watts MAX / 500 watts RMS 42 Hz frequency response and 88dB sensitivity Aluminium Voice Coil Subwoofer with treated paper membrane and rubber base

Inserts slugly into Gen-2 P3S trim rings. Protects against surround and cone damage. Sized to fit Gen-2 P3S woofers

Bundle includes: 2 Rockford Fosgate P2D4-12 12” Subwoofer - DVC (dual 4-Ohm), 400 Watts Rms, 800 Watts Peak Dual linear spider with embedded 16 AWG tinsel leads Custom 10-AWG nickel plated push terminals Features C.L.E.A.N. Set-up Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)

Boss NEO12, 12" (30cm), Ripper Series, 300W RMS, 600W MAX, Impedancy: 4 ohms

BUILT-IN AMPLIFIER: A built-in 1200 Max watt amplifier powers the subwoofer PULSE WIDTH MODULATED: This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It increases efficiency, is lighter, smaller reliable VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of your subwoofer(s) HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the BAB10 to your factory radio or an …

Membrane diameter: 165 mm Capacity: 180/90 Watt RMS/Max Impedance: 4ohm Mounting Depth: 63 mm

Fully maximized Sealed motor structure UV resistant one-piece cast-polymer baskets Sealed magnet & rubber surrounds Polypropylene cone

Aluminum rear link plate 10-inch Front ABS / Steel reinforced port link Center link stabilizing dowels Alpine logo plate All hardware included

Black metal mesh grille Fits the R2-W10D4 and R2-W10D2 subwoofers from Alpine Protect your subwoofer with a sleek and durable grille for your Alpine subwoofer.

Kicker 10 Inch 4 Ohm 500W Subwoofer for Marine Audio / Part # 45KM104 Compatible with: Marine Package Contains One Subwoofer The KICKER KM 10-inch Marine Subwoofer is made to work perfectly in a sealed or ported enclosure. You want the kind of bass that makes your friends want to be where the party is. KICKER Marine subs make it happen, with 10 and 12-inch drivers made for sealed or ported enclosures. Completely weather-resistant, these 10 and 12-inch marine subs are real-world tested for salt/fog and UV exposure, meeting or exceeding ASTM standards for marine durability.