Other network equipment

Cisco Catalyst PWR-CLP= Power Cable Retainer Clip, For Use with 3560-C, 2960-C, 3560-CX, 2960-CX, 2960-L and C1000 Network Switches, Enhanced Limited Lifetime Warranty (PWR-CLP=)

The AIR-AP-BRACKET-1 low profile wall/ceiling mount is used tomount aCisco Aironet1040 1140 1260 3500 or 3600 series access points.Note: This is a low profile option. The wall/ceiling base isincluded with the necessary screws for installation. We proudly offer a compatibility guarantee and lifetime warranty for risk free purchasing.

The Narrow Patch antenna is ideal for high ceiling (25 ft+) aesthetic consensus installations in high density applications and where APs are covering high density users in small zones. Some example use cases are in large lecture halls/stadiums as well as event venue centers. This antenna supports Merakis smart antenna capabilities. The price shown is for a 5-connector model; the Narrow Patch antenna can be purchased with 5 or 6 connectors.

Cisco Meraki MA-ANT-20 network antenna Omni-directional antenna N-type 7 dBi

Cisco Meraki MA-ANT-21 network antenna Sector antenna N-type 13 dBi

Designed for use with Cisco Meraki MR66 or MR72 2.4 GHz radios. The sector antenna can extend the range of a Cisco Meraki MR66 or MR72 device by focusing the wireless signal in a specific direction; the best way to establish a medium distance point-to-point wireless link.

Cisco Meraki MA-ANT-25 network antenna Sector antenna N-type 8 dBi

The Cisco Meraki ANT-27 sector antenna is a 9 / 12 dBi MIMO dualband 2.4 and 5 GHz antenna ideal for providing client coverage over focused areas or creating backhaul links. It is designed for use with Meraki APs that have N-type connectors.

The Dipole antenna is ideal for low ceiling installations where wall penetration or extended reach are important. Some example use cases are low-density deployments like schools and hotels to provide basic connectivity. These types of best-effort deployments usually have APs installed on walls or uneven surfaces. This antenna is bendable.

The Panel Omni antenna is ideal for low ceiling aesthetic consensus installations where wall penetration or extended reach are important. Some example uses are low density deployments like schools and hotels to provide basic low performance connectivity. These types of best effort deployments usually have APs installed in the hallway to cover adjacent rooms. This antenna supports Merakis smart antenna capabilities. The price shown is for a 5-connector model; the Panel Omni antenna can be purchased with 5 or 6 connectors.

Cisco Meraki MA-ANT-3-D6 network antenna Omni-directional antenna RP-TNC 3.7 dBi

The Wide Patch antenna is ideal for wall-mounted deployments aesthetic consensus installations in low density applications and wall mounted or ceiling mounted below 25 ft in high density applications. Some example use cases are in vestibules with very high ceilings but few devices connecting and lecture halls where install is close to the users. This antenna supports Merakis smart antenna capabilities. The price shown is for a 5-connector model; the Wide Patch antenna can be purchased with 5 or 6 connectors.

Easily pair Meraki cellular gateway with MX SD-WAN to empower a hybrid workforce and pair with MR MV or MT to build smart spaces. Manage them all on one platform to deliver an elevated customer experience.

This kit provides replacement mounting accessories for Cisco Meraki MR33 access points and can be used to mount to most 9/16 15/16 or 1 T-rails. The kit contains a replacement mount plate drop ceiling clips with set screws two 6-32x4mm (flush T-rail) screws two 6-32x7mm screws (recessed T-rail) two rubber spacers four wall screws and anchors security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).

This kit provides replacement mounting accessories for Cisco Meraki MR42 access points and can be used to mount to most 9/16 15/16 or 1 T-rails. The kit contains a replacement mount plate drop ceiling clips with set screws two 6-32x4mm (flush T-rail) screws two 6-32x7mm screws (recessed T-rail) two rubber spacers two wall screws and anchors security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).

This wall mounted kit is designed to be used in installations where additional cabling outlets are needed (e.g. telephone cabling) via the same wall plate used by an MR30H access point and where an aesthetically pleasing solution is needed. The kit contains the front and rear panels of the accessory two 12mm Philips head screws and a keystone jack port.

Gigabit networking is the upper echelon of performance, especially compared to 10 and 100 Mbps connections. Formerly Linksys Business Series, now part of Cisco Small Business Network Accessories, the MGBSX1 Gigabit SX Mini-GBIC SFP Transceiver offers the ability to tap into faster networking speeds using fiber optic cabling. Installing the module is as easy as sliding it into an accompanying port on a compatible Cisco switch.

The Cisco Fourth-Generation 1- 2- 4- and 8-PortT1/E1Multiflex Trunk Voice and WAN Network Interface Modules (NIMs) support data and voice applications on the Cisco 4451-X Integrated Services Routers (Figure 1). These cards combine WAN-interface-card (WIC) voice-interface-card (VIC) ISDN Primary Rate Interface (PRI) dial-access integration and channelized-data (CE1T1) functions to provide unparalleled flexibility versatility and investment protection through their many uses. Customers who choose to integrate data and voice in multiple steps preserve their investment in a T1/E1 WAN interface.

Cisco N2200-PAC-400W= network switch component Power supply

Cisco 19-Inch Rackmount for Catalyst 3560, 2960 and ME-3400 Compact Switches, 90-Day Limited Hardware Warranty (RCKMNT-19-CMPCT=)

Cisco 10GBASE-CU, SFP+, 2m fibre optic cable SFP+ Black

Cisco 4G-AE010-R Indoor cellular signal booster Grey

Highlights
-Adds fiber-optic connectivity to Cisco Small Business and Cisco Small Business Pro Series switches.
-High-performance link for connecting networks within a building or small campus area.
-Easy removal with an integrated spring latch.
-Hot swappable to maintain network availability.

Product Overview
Cisco MFE and MGE Small Form-Factor Pluggable (SFP) or mini Gigabit Interface Converter (mini-GBIC) transceivers are easy-to-install modules that provide a simple way to add fiber connectivity or to add an extra Gigabit Ethernet port to your Cisco Small Business or Cisco Small Business Pro Series switches. The transceivers are available for single-mode or multimode fiber-optic …

Used for connecting to StackWise ports on the rear panel of Catalyst 3750 switches. Cisco StackWise technology uses proprietary connectors and cables.