Other Network Equipment

This kit provides replacement mounting accessories for Cisco Meraki MR42 access points and can be used to mount to most 9/16 15/16 or 1 T-rails. The kit contains a replacement mount plate drop ceiling clips with set screws two 6-32x4mm (flush T-rail) screws two 6-32x7mm screws (recessed T-rail) two rubber spacers two wall screws and anchors security screws and a security screw tool that can be used to secure the access point to the mount plate (engaging the security screw prevents accidental dislodging and theft).

Cisco Meraki MA-MNT-MR-H2 wireless access point accessory WLAN access point mount

All in one Wireless Security and SD-WAN
Stateful firewall throughput: 450 Mbps
Recommended maximum clients: 50
Small form factor

Cisco NIM-1MFT-T1/E1= network equipment spare part Voice network module

Cisco NIM-2FXO= network equipment spare part Voice network module

Cisco NIM-4FXO= network equipment spare part Voice network module

Cisco PVDM4-32= network equipment spare part Voice network module

Cisco 19-Inch Rackmount for Catalyst 3560, 2960 and ME-3400 Compact Switches, 90-Day Limited Hardware Warranty (RCKMNT-19-CMPCT=)

Cisco 10GBASE-CU, SFP+, 2m fibre optic cable SFP+ Black

Cisco MGBLX1 SFP Transceiver | Gigabit Ethernet (GbE) 1000BASE-LX Mini-GBIC (MGBLX1)

Cisco PWR-66W-AC-V2= power adapter/inverter Indoor Black

Cisco AIR-MNT-ART1= mounting kit Grey

D-Link 1000Base-LX Mini Gigabit Interface Converter network transceiver module

The DPE-101GI Power Over Ethernet (PoE) Injector is designed to supply a power and data connection to PoE devices such as an IP Camera or Wireless Access Point. The DPE-101GI gives you the ability to mount your PoE device virtually anywhere in a building, such as on ceilings or near entryways, by eliminating the need for a nearby power outlet and attached power supply. D-Link’s DPE-101GI combines electrical power with a Gigabit network connection and produces a Gigabit Power over Ethernet (PoE) signal, allowing a single Ethernet cable to carry both data and power to a device. Cost Efficient Flexibility Deploying the DPE-101GI saves both installation costs and equipment costs, allowing a…

D-Link DEM-311GT network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

D-Link DEM-CB100S optical cross connects equipment Black

D-Link DNH-100 network management device 100 Mbit/s Ethernet LAN

The DPE-301GS PoE splitter is used with end devices such as wireless access points, IP cameras and VoIP phones that don't natively support PoE, but rather require DC power input of 5V, 9V or 12V. It receives PoE power on a network cable from a PoE switch or midspan injector, and splits the Ethernet and DC power into two separate cables. One cable provides the DC power, and the other cable provides the Ethernet signal. Users can select from 5VDC, 9VDC and 12VDC power for their device using a selectable DIP switch on the device.Features:2-in-1 PoE Injector and Splitter:- Both the DPE-301GI (injector) and DPE-301GS (splitter) can be used together, as a complete PoE transport system. This is especially …

Devolo WiFi 5 Repeater 1200 Network repeater 1200 Mbit/s White

Devolo WiFi 6 Repeater 3000 Network repeater 3000 Mbit/s White

Devolo WiFi 6 Repeater 5400 Network repeater 5400 Mbit/s White

Devolo WiFi Repeater+ ac Network repeater 1200 Mbit/s White

Digitus 10" Cable management panel

Digitus Adapter Plate for Fiber Optic Unibox for wall mounting, small