Other Network Equipment

This Keystone 'V' Patch Panel provides the facility to mount up to 24 Maxxam Keystone Jacks in a 1u chassis. The panel can be used with our Cat6a STP Cat6 UTP and Cat5e UTP Keystone Jacks which must be ordered separately.

The Keystone Jacks can be easily installed and removed from the rear of the panel facilitating quick Moves Adds & Changes. The angled front plate means that patch leads can be easily dressed to either side of the rack or cabinet thus removing the need for patch lead management bars in increasing port density. The rear cable management bar can be easily detached without the requirement for any tools thus providing improved access for installing or removing jacks. It can then …

This Cat6a 24 Port Shielded PCB Patch Panel 0.5u offers Cat6a compliant performance and supports high speed protocols such as 10G Ethernet. The panel is backwards compatible to all preceding cabling categories ensuring support of all IP applications. The 0.5u height maximises space in racks and cabinets and is ideal for Top Of Rack applications in data centres and large Comms rooms.

The individually shuttered ports prevent contamination of contacts in unused ports and the shutters can be easily removed if not required. The horizontally mounted PCB provides easy termination using either a Krone or 110 punch down tool and there are colour coded labels for both 568A and 568B wiring configurations.…

These 1u Cat6a Shielded 'Through Coupler Panels' are capable of data rates up to 1Gb/sec. They incorporate a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

This Cat6a 24 Port Shielded PCB Patch Panel 1u offers Cat6a compliant performance and supports high speed protocols such as 10G Ethernet. The panel is backwards compatible to all preceding cabling categories ensuring support of all IP applications.

The individually shuttered ports prevent contamination of contacts in unused ports. The shutters can be easily removed if not required. The horizontally mounted PCB provides easy termination using either a Krone or 110 punch down tool and there are colour coded labels for both 568A and 568B wiring configurations. Cable screen termination clamps and an overall metal cover ensure protection from Electromagnetic Interference and a 400mm drain wire …

The Cablenet Cat6 FTP 1u 24 Port Patch Panel offers Cat6 compliant performance and supports high-speed protocols up to 10G Ethernet. The panel is backwards compatible to all preceding cabling categories ensuring support of all IP applications designed to run over them.

The horizontally mounted PCB provides easy termination using a Krone or 110 punch down tool and is protected by an easy to remove cover the IDC's are clearly labelled for 568B wiring.

The panel has individually numbered ports.

This panel is supplied with an earth bonding post to help maintain grounding continuity.

These 1u Cat6 unshielded UTP Through Coupler Panels are capable of data rates up to 1Gb/sec. They incorporate a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

The Cablenet Cat6 UTP 1u 24 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. Clearly labelled for 568A and 568B wiring schemes and the horizontally mounted PCB provides easy termination using a Krone or 110 punch down tool.

Cable management is provided by the tray on which the IDC's are mounted with a tie down post secures the cables in the cabinet/rack.

Each port has a provision for individual labelling.

The Cablenet Cat6 UTP 1u 24 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punchdown blocks on rear of panel at 180 degrees to the front. Cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Each port has a provision for individual labelling.

Coloured markings on punch down blocks and rear labels for correct cable termination.

Cablenet 50 and 25 port RJ45 1u high density voice panel with punch down blocks at the rear for a maximum of 3 pairs (6 wires).

The Cablenet voice panel has been designed for both digital and analogue applications depending on phone system to be installed.

Typical wiring: Pair 4&5 Analogue Pair 3&6 Panasonic Digital Pair 1&2 BT Digital.

The Cablenet Cat5e UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

The Cablenet Cat5e UTP 2u punch down patch panel with 48 ports in 2u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

The Cablenet 48 Port 1u Unloaded Keystone Patch Panel provides the facility to mount up to 48 keystone jacks in a 1u chassis. The panel can be used with the Cat6a Cat6 and Cat5e keystone jacks which must be ordered separately.

Keystone jacks can be easily installed and removed from the rear of the panel facilitating quick Moves Adds & Changes and the rear cable management bar can be easily detached without the requirement for any tools providing easy access for installing or removing jacks.

The panel is supplied complete with a 400mm earth cable for connection to the cabinet or rack earth bonding system.

The Cablenet Cat6 UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

These 2u Cat6 unshielded UTP Through Coupler Panels are capable of data rates up to 1Gb/sec. They incorporate a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

The Cablenet Cat6 UTP 2u 48 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punchdown blocks on rear of panel at 180 degrees to the front ports. An integrated cable management bar and cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Ports are labelled in banks of 8 and feature a slide in label and plastic cover.

Coloured markings on punch down blocks and rear labels for correct cable termination.

Cablenet 50 and 25 port RJ45 1u high density voice panel with punch down blocks at the rear for a maximum of 3 pairs (6 wires).

The Cablenet voice panel has been designed for both digital and analogue applications depending on phone system to be installed.

Typical wiring: Pair 4&5 Analogue Pair 3&6 Panasonic Digital Pair 1&2 BT Digital.

The Cablenet Cat5e UTP 1u 24 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punch down blocks on rear of panel at 180 degrees to the front. Cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Each port has a provision for individual labelling.

Coloured markings on punch down blocks and rear labels for correct cable termination.

The Cablenet Cat6 UTP 1u 24 port patch panel offers Cat6 compliant performance and supports high speed protocols up to 1G Ethernet.
The panel is backwards compatible to all preceding cabling categories ensuring support of all IP applications designed to run over them.

The vertically mounted PCB provides easy termination using a Krone or 110 punch down tool and there are colour coded labels for both 568A and 568B wiring configurations.
The panel has individually numbered ports and a port labelling facility.
The rear cable management bar can be easily removed and fitted without the need for tools thus providing improved access to terminations.

OM3/4 Multimode Loaded Fibre Patch Panel to accept 12 fibres connecting to 6 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OM3/4 Multimode Loaded Fibre Patch Panel to accept 48 fibres connecting to 24 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OM3 Multimode Loaded Fibre Patch Panel to accept 96 fibres connecting to 24 LC quad adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.
…

OS2 Singlemode Loaded Fibre Patch Panel to accept 24 fibres connecting to 12 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OS2 Singlemode Loaded Fibre Patch Panel to accept 96 fibres connecting to 24 LC quad adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs. …

CNL OF PPan OM4 24 OF LC DX x12