Power Saws

The Makita D-72176 is a chain blade sharpening set, supplied in a compact water and grease resistant roll up pouch. It is equipped with a 150mm flat file with a resin type handle for use with or without the depth gauge, angle markings on the file holder for easier, more accurate sharpening angle and file holder (guide bar) with handle and angle markings so to be aligned with the chainsaw chain. Specifications • Size: 4.8mm Features & Benefits • Chain blade sharpening set • Compact water and grease resistant roll up pouch • Angle markings on file holder for easier and more accurate sharpening angle • Resin type handle • File holder (Guide Bar) with handle and angled …

Lenox SPEED SLOT® Hole Saws with T3 technology™ Features & Benefits• 50% Longer Life. 2X More Durable • 10% Thicker Wall adds strength and durability • Improved Metal Cutting Performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase design for fast, easy plug ejection

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

The RemGrit® Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip. It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws. Maximum Cutting Depth: 29mm.Disston G054 Remgrit Holesaw 86mmAdditional Information:• Size: 86mm• Material: Carbide Grit

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 73 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

The 86mm Diameter Hole Saw from C.K Tools is Ideal for DIY Enthusiast and Carpenters alike, this Hole Saw is suitable for cutting steel, die cast metals, nail embedded wood, plywood, hardwood floors, plastic etc. This Hole saw comes with hardened vari-pitched teeth for a fast, clean cutting experience. Constructed from HSS Bi-Metal for longevity. Main Features: 86mm Diameter HSS Bi-Metal Hardened vari-pitched teeth Technical Specification: Diameter Size: 86mm Cut through Steel?: Yes Weight: 315g Specification Sheet 1 Year Guarantee Included

The Faithfull Prestige Mitre Saw Protractor is a modern and accurate way to measure internal and external wall angles. This measurement is commonly used to transfer angles to mitre saws but could also be used as a datum point for hand cutting. Manufactured using CNC machining from heavy-duty aluminium. It is then black anodised for protection and laser etched for accuracy.Additional Information:• Type: Mitre Saw Protractor

HSS Cobalt Sheet Steel Hole Saw 20mmC.K Sheet Steel Hole Saw 20mm~ Tooth configuration optimised for the fast cutting of sheet steel~ Cuts sheet steel faster than standard hole saws~ 8 teeth per inch for a smoother cutting action~ Cleaner holes with no burring~ Premium grade 8% Cobalt Alloy Steel construction for an extended working life~ Slimline design reduces frictional heat build up and prevents tooth burn out~ compatible with impact drills ~ E6,3 Drive System~ flared shoulders prevent overdrilling ~ avoids damaging inner components of electrical cabinets and junction boxesTechnical DataDiameter: 20mmTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status …

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …