Power Saws

prices on 1958 models

£120

clear

Save List

Ignition Coil With Spark Plug For Stihl Fs38 Fs46 Fs45 Fs55 Fc55 Fc55z Fc5

46.55Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

Fit for STIHL FS38 FS55 FC55 FC55Z FC55-DZ FS46 FS45 HL45 HL45Z HL45-DZ HS45 HS45Z KM55 KM55RZ KM55C KM55R Replaces part number 4140 400 1308 Not fit for Stihl 41401308A / 414 0 1306A / 4140 1305 / 14 more→0 1303A Not suitable not for KM55 RC-E DZ or R-DZ Coil models Scope of delivery: 1 ignition coil + 1 spark plug

Wood Peeler Notcher Suitable For Chain Saws Chainsaws 758439399546

99.00Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

Description Splash Protection Cover: It can effectively prevent the splashing of wood chips and reduce the impact of plaster and splashes, making use safer. Sturdy Bracket: The 0.236-inch thick and more→2.08-inch wide bracket improves the efficiency of the drive and extends the life of the product. Assembly Sequence 1. Drain the oil from the chainsaw. 2. Remove the bar and chain (see your chainsaw manual). 3. If there is a removable comb (support) - remove it. 4. Remove the clutch (star). 5. If there is a tensioning device in the housing, remove the device. 6. Install the clutch (drive pulley from the attachment kit) if necessary, using shims. 7. Install the attachment on the chainsaw …

Carburetor Tune Up Kit For Stihl Ms171 Ms181 Ms211 Zama C1q-s269 Carb Chai

17.95Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

DESCRIPTION New highly quality for Stihl MS171 MS181 MS211 Chainsaw Carburetor Air filter Aftermarket Replacement OEM Number: 1139 120 0619, 1139 1207 100, 1139 1200 612,ZAMA C1Q-S269, 1139 120 1602 C more→olor: color as shown Material: metal + plastic Package Contents: 1* Carburetor 2* Gasket 1* Air filter 1* Fuel filter 1* Fuel line 1* Spark plug Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

Bosch Professional Costilla Fs 200 Abu Blade Saw Cut Silver 2608661201

from £15.99 up to £18.95

Compare prices₆→

The FS 200 AB Flush cutting saw blade has a SDS fitting for tool-free saw blade changes. It is compatible with all Bosch Power Tenon Saw GFS 350 E Professional saws.Features:- FS 200 AB Flush cutting more→saw blade ensures precise, tear-free cuts in wood while maintaining a high surface quality- HCS saw blade with hardened teeth for clean results- Fine teeth provide accurate cut on both left and right sides of material- SDS fitting for tool-free saw blade changes- For use in wood combination materialsSpecifications:Materials: - Softwood- Hardwood- Medium density fibreboard- Multiplex board- Particleboard- FS 200 ABU- Material: HAS- Length of teeth mm: 200- Tooth pitch mm: 1.25

Lumberjack Universal Mitre Saw Stand Folding Adjustable Legs MSS200

from £111.99 up to £149.99

Compare prices₂→

The MSS200 is a telescopic Universal Leg Stand that accommodates the fitting of most Mitre Saws, with an 800mm beam that extends to support up to 1.7 metres for use with large workpieces and can suppo more→rt up to 200kg providing maximum flexibility and capacity. This portable lightweight stand also features foldaway telescopic legs, robust wheels and pull handle making transportation very easy in and around any jobsite. Features: Quick to assemble Easy to fold legs make the stand easy to pack away and transport Height-adjustable arms are able to support large workpieces Specifications: Dimensions: H:27.0 x W:30.6 x D:97.2 cm Colour: Red Material: Metal Model Number: MSS200 Self Assembly Required: …

Controller fits Makita BSS611 Circular Saw - Part No 620259-9

22.99Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

This Is An O E M Authorized Part Fits Various Makita Models Product type:SAW This is a Makita part Part Number 620259 9

Bahco 3830 C Bi-Metal Variable Pitch Hole Saw 108mm 3830-108-C

from £28.95

Compare prices₃→

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic t more→ools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 108 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

Lenox T3 Bi Metal Speed Slot Hole Saw 152mm 3009696L

from £99.78 up to £105.95

Compare prices₄→

Lenox SPEED SLOT® Hole Saws with T3 technology™ Features & Benefits• 50% Longer Life. 2X More Durable • 10% Thicker Wall adds strength and durability • Improved Metal Cutting Performanc more→e • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase design for fast, easy plug ejection

DeWALT DWS5021 Plunge Saw Guide Rail 1m DEWDWS5021

from £63.95 up to £99.99

Compare prices₆→

DEWALT Guide rail for use with DEWALT DWS520 plunge saws. DEWALT DWS5021 Plunge Saw Guide Rail 1m.

Electric Drill Plate Cutter Attachment Metal Cutter Sheet Metal Cutter Dri

33.98Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

[High quality material and high performance] This drill disc tool is made of high quality material. It has good wear resistance and high hardness, so service life is . The electric drill cutting machi more→ne can cut 0.8mm thick metal plate, which is more labor-saving and faster than ordinary shear and cutting machines. [Wide application] The electric drill board cutting machine is suitable for cutting metal plates (iron sheet 0.2-1mm, white sheet 0.3-1mm, steel plate 0.2-0.8mm, copper sheet 0.3-1.2mm, aluminum sheet 0.3-1.2mm), materials, pipes, composite profiles, coating materials, glass fiber, etc. [Easy to operate and accurately cut] This metal plate tool is easy to install on the electric drill.…

Starrett Diamond Coated Hole Saw 89mm D0096

from £82.95

Compare prices₃→

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

24v Chainsaw Battery, 24v Lithium Battery - Electric Chain Saw Accessories

32.76Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

Features 1. Lightweight body design, easy to carry. 2. High hardness quenched chain, wear-resistant, sawing more smoothly. 3. Large-capacity lithium battery, imported batteries, long battery life. 4. more→All-copper motor, high temperature resistance, no burn-in. Specifications: Product Name: Electric Chain Saw Quantity: 1 Pc Package Included: 1xElectric Chain Saw

Draper Expert Bi Metal Hacksaw Blades 12" / 300mm 18tpi Pack of 10 736/10

from £18.95 up to £21.00

Compare prices₅→

Expert Quality, saw edge, manufactured from high speed steel strip, electron beam welded to high quality carbon steel backing. ten blades per card. Conforms to BS 1919 Contents: 1 x Bi-metal Hacksaw more→Blades, 300mm, 18tpi (Pack of 10)

Trend Trend CSB/19024 - 24T 'CraftPro' Saw Blade 190mm

16.46Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

Rip cutting hard & soft wood, particle board & stone fibre board

Milwaukee Hole Dozer TCT Carbide Toothed Hole Saw 127mm 49560748

from £87.95

Compare prices₃→

Milwaukee Hole Dozer tungsten carbide tipped hole saws offer up to 10 times more lifetime, heat resistance and wear resistance compared to Bi-Metal hole saws. They are suitable for plumbing (cast iron more→), metalworking (stainless steel, high alloy steels, aluminium) and applications in composites (plastics, sandwich material, computer flooring, fibreglass, plastic coated wood boards, nail embedded wood). Specifications • Diameter: 127mm • Diameter (Imperial): 5" • Cutting Depth: 41mmFeatures & Benefits• Long lifetime • High heat and wear resistance • 4TPI tooth geomeetry with large gullets for material removal • Offset teeth for decreased resistance • PLUG …

Chainsaw Brake Band For Partner 350 351 370 371 390 420 Poulan Chain Saw C

112.93Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

Item Details: *100% new and high quality * Suitable for PARTNER 350 351 370 371 390 420 Package Contents: 1*Chain Brake Band Note: The real color of the item may be slightly different from the pictur more→es shown on website caused by many factors such as brightness of your monitor and light brightness. _x000D_

Festool Cortador Circular KS-PS 420 497304

from £57.00

Compare prices₂→

Used for precise circle and arc cuts
Extends for cuts between 4-3/8" and 9' 10-1/8" in diameter
Attaches tool-free to optional Base Adapter 497303
Rolls up for compact storage whe more→n not in use
Works with all Festool Carvex Jigsaw models

DeWalt DeWalt DWS5029 Replacement Edge Strip

29.99Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

The DeWalt DWS5029 helps to improve finish and accuracy by leaving minimum space between blade and edging strip.

EVOLUTION 800B MITRE SAW STAND WITH EXTENSION ARMS Ideal For Workshop and

74.99Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

Carburetor 031av For Stihl 030 031 032 032av Carb Chainsaw Wa-2 Wa-2-1 111

93.24Buy!
£

Fruugo.co.uk

Delivery: in United Kingdom

Report

DESCRIPTION Carburetor 031AV For Stihl 030 031 032 032AV Carb Chainsaw WA-2 WA-2-1 1113 120 1603 SPECIFICATION PACKING INCLUDED: AS PHOTO NEUTRAL PACKAGING SHIPPNG WE WILL SHIP THE ITEM OUT TO YOU WIT more→HIN 1-7 WORKING DAYS AFTER WE CONFIRMED YOUR PAYMENT AND ADDRESS. FEEDBACK IF YOU HAVE ANY PROBLEMS ABOUT THE ORDER, PLS FEEL FREE TO CONTACT US AND WE WILL HELP YOU SOLVE IT.

Bosch Sheet Metal Hole Saw 127mm

from £25.04 up to £34.95

Compare prices₆→

The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth break more→age and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. The Special for Sheet Metal Hole Saw features Bosch's unique power-change …

Lenox Diamond Hole Saw 54mm 10507834

from £65.95

Compare prices₃→

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 54mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7LFeatures & Benefits• Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removalContents• Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

Husqvarna Short Sleeve t-Shirt X-Large Navy T-shirt Short Sleeve

54.08Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

Husqvarna ÅRGÅNG style women’s short-sleeve T-shirt from the Husqvarna Xplorer collection For Husqvarna fans and outdoor enthusiasts to show off their Husqvarna pride 100% ringspun combed cotton wit more→h biowash finish for breathability and maximum softness Displays contemporary “Crown H” logo on front, traditional “Crown H” logo on back Tagless shirt with graphics in a waterbase print.Stylish Husqvarna-brand necktape.Branded wrap label on the bottom left of the shirt stating "Husqvarna established 1689"

Bahco Contractor's Bi-Metal Holesaw Set, 11 Piece BAHHSSET2025

from £55.95 up to £74.99

Compare prices₄→

The Bahco Contractor's Bi-Metal Holesaw Set contains Sandflex bi-metal holesaws that are specifically designed for metal cutting but can also be used in most materials such as wood and plastics. Bi-me more→tal construction with 8% cobalt. Supplied in a handy plastic case. This 11 Piece Set contains 4 x 20mm Holesaws 4 x 25mm Holesaws 1 x Arbor* 2 x Replacement Drill Bits Specification Max. Cutting Depth 38mm *Arbour requires a power drill with 10mm chuck.

24 more item(s)