Power Saws

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut when compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials.Teeth per Inch (25mm): 5,5Teeth Type: Extra Cobalt HSSCountry of Origin: BR Specifications: Diameter metric: 127mm Diameter imperial: 5" Cutting Depth metric: 41mm Cutting Depth imperial: 1,5/8" Thread Size: 5/8 - 18"Features & …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

• Premium grade 8 % Cobalt alloy steel construction for an extended working life • Excellent wear resistance even at high temperatures • For fast and clean cutting of metal, wood, aluminium, steel, cast iron, brass and plastics • Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibration Specifications: Arbour thread size - 15.7mm Thread plate thickness -5mm

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth: 38mmDiameter: 121mmAdditional Information:• Size: 121mm• Material: Bi-Metal

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: …

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …

It is suitable for use with angle grinders. The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-brazing technology ensures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds • Vacuum-brazing technology ensures long lifetime Specifications: Diameter (D) mm: 14 Diameter (D) Inch: 9/16 Working length (L1) mm: 30 Materials: Stone Materials …

Guide Rail Adapter enables parallel cutting to guide rails
Please check the compatibility with your tool by the model number (format: x xxx xxx xxx)
The model number can be found on the type label of your tool
For a complete list of compatible models, refer to the product description below
Scope of Delivery: 1x Adapter, Height 280 mm x Width 190 mm x Depth 15 mm

20 V 2000 mAh battery, interchangeable with CecoRaptor Perfect series tools.No load speed of 2700 rpm, which allows you to be very versatile in your DIY work.The cutting depth that can be achieved is 80 mm in wood, 12 mm in aluminum and 5 mm in metal.With a stroke length of 20 mm, the saw allows easy and comfortable sawing, with very fine cut finishes.It allows miter cuts to be made very easily on both sides with a maximum angle of 45º, with steps at 15º, 30º and 45º.Includes a set of 4 saw blades for wood and 4 saw blades for metal.LED work light, which allows its use in areas with poor lighting.Autonomy of up to 20 minutes guaranteeing the complete execution of all your DIY projects.

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 98 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 105 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …