Power Saws

Bi-metal Fast Cut holesaws combine a brand new tooth material, boasting enhanced durability and a new tooth design that provides a smoother, faster cut on a wide range of materials, when compared against the previous Constant Pitch saw. Specifically suited to cutting stainless and mild steel sheet, the Fast Cut will also cut through tubes with a wall thickness of up to 3mm (1/8"). Features and Benefits New tooth design, providing a smoother, faster cut on almost all materials Enhanced heat and wear resistance Specifically suited to cutting stainless and mild steel sheet Will also cut through tubes with a wall thickness of up to 3mm Notes Images for illustrative purposes only

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-111-C Carded Size: 111mm.Additional Information:• Size: 111mm• Material: TCT

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. The Special for Sheet Metal Hole Saw features Bosch's unique power-change …

Diamond Hole Saws - Metric Continuous, brazed edge lasts longer in tile and stone. Robust design for greater durability in tough applications. Low torque, little pressure required.Over-sized slot in hole saw for easy plug removal. Compatible with standard and Snap Back arbors. IMAGE IS FOR ILLUSTRATIVE PURPOSES ONLY. PLEASE REFER TO PRODUCT DESCRIPTION.

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

This Starrett Holesaw Kit is ideal for cutting stainless and mild steel sheeting, plasterboard, wood and thin plastics. The holesaws are constructed from heat-resistant, hardened steel with constant pitch teeth for exceptionally smooth cuts. Completely assembled ready for use. A safety stop collar at the base of the holesaw prevents travel beyond the holesaw depth. Supplied in a plastic carry case with the following sizes: 20, 25 and 32mm.Additional Information:• Material: Bi-Metal• Pitch: ConstantFeatures & Benefits• Integrated hex shank arbors • Optimised for cordless tools • Requires less energy and saves battery power • Safety stop prevents drilling beyond maximum …

Base Blade Made Of Dimensionally Stable Sk5 Hardened Steel (> 40 Hrc) Ensures Accuracy Expansion Slots Lower Vibration During Use, Which Dampens Noise And Reduces Heat Development Optiline Wood Circular Saw Blades Have Atb Tooth Geometry: High Tooth Count For Clean Results, Low Tooth Count For Solid Depending On The Number Of Teeth, Different Results Can Be Achieved With All Optiline Wood Circular Saw Blades, Which Feature Atb (Alternate Top Bevel) Tooth Geometry: When Equipped With A High Tooth Count, The Blade Delivers Clean Cuts, Whereas A Low Number Of Teeth Guarantees Solid And Efficient Cuts. It Is Compatible With Table Saws.High-Quality Precision-Ground Carbide Teeth Enable Clean Cuts …

Replacement bar and chain for the DeWalt DCM575 chainsaw. Specifications • Length: 400mm

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…