Car Bulbs

Valeo Headlamp to be mounted on the Right Side of the car Valeo Headlamp suitable for right hand drive vehicles Original equipment quality Headlamp and produced in Europe with the same requirements than an original product Xenon technology headlamp equipped with the high quality optic to provide a better driving comfort and road safety Valeo Service recommands you to confirm the fitting with your car, please check the detaiLED car models below and the car selector. Valeo is one of the leaders in the global lighting market and offers premium solution and technology on the independant aftermarket

Installation: links Left/right traffic: only suitable for right-hand traffic Manufacturer's item number: 046754

16 high-power LEDs with an enormous light output of 3,000 lumen provide better visibility than with xenon. This is made possible by a light colour similar to daylight. Particularly resistant to mechanical impact due to nylon diffusing disc. Die-cast aluminium housing, stainless steel holder No interference with electronic devices such as radio. Overheating protection through integrated thermosensor Lamp Type: LED - Number of LEDs: 16 - Power consumption: 43W - Colour Temperature: 5700K Clear diffusing lens

quality brand

quality brand

Made by Magneti Marelli Left Side, Driver Rear Lamp Backup Light / Rear Fog Light Bumper Position / Upper

The K-LED 2.0 R can switch between a rotating or flashing warning signal by programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED for indicator (LED)/With flashing warning signal - Lens Colour: Yellow - LED colour: White

The K-LED 2.0 F can switch between a rotating or flashing warning signal by switch or programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED - Number of LEDs: 20 - Power consumption: 30W With flashing warning signal - Lens …

Made by Magneti Marelli Rear Lamp

Made by Magneti Marelli Left Side, Driver Rear Lamp

OSRAM LED fog lights with projection lenses similar to Xenon are innovative all-rounders Can be used either as front fog lamps for improved visibility or as a daytime running light for more safety on the road

Made by Magneti Marelli Left Side, Driver Rear Lamp Station Wagon

Made by Magneti Marelli Right Side, Passenger Rear Lamp Station Wagon

Made by Magneti Marelli Left Side, Driver Rear Lamp

PIAA gen 2 LED headlight bulb kits provide a plug and play modern upgrade to existing headlight bulbs. The LED bulbs have been engineered to maximise the light output from the factory lamp unit, focusing the beam with less scatter for vastly improved nigh time visibility.Direct replacement 'plug and play' fitmentUp to 380% improvement over halogen bulbs making night driving saferIntegral heat sink and cooling fan to maintain optimum light output at all timesInstant light when switched on. No warm up period as with HID bulbs6000k light colour which is close to daylight for excellent clarity of visionPIAA gen 2 LED bulbs are precision engineered to not only produce the best possible light

Thanks to its powerful light output of 3,800 lumen, the Modul 90 LED can replace xenon worklights. The black aluminium housing is equipped with cooling fins that provide the necessary heat dissipation for the four high-power LEDs. In addition, temperature sensors protect the worklight from overheating. Only in this way can the long service life of the LEDs and safe working at night be guaranteed. Due to its low power consumption, it is ideally suited for use on battery-powered vehicles and vehicles whose alternator is already under heavy load. The light is distributed by a specially developed multi-facetted reflector and ensures homogeneous illumination. Lamp Type: LED - Number of LEDs: …

HELLA 2LT 980 740-201 Work Light

Can be synchronised with two or more units Besides continuous light, four different flash patterns (single, double, triple and quadruple flash) can be set Tested and approved according to the European Directive for beacons (ECE-R65 ) Integrated day / night mode Slim version with an installation height of only 12.8 mm Lamp Type: LED - Number of LEDs: 3 - Power consumption: 14W With flashing warning signal - Lens Colour: Crystal clear - LED colour: Blue - Fastening Type: for horizontal fastening

Active thermal management: The use of thermally conductive materials and the special arrangement of the components means that the heat is carried away from the LEDs and their service life is extended An innovative electronic concept enables the lighting function without moving parts The impact-resistant and dirt-resistant light dome ensures an optimum warning effect at all times Previous models KL 700 Halogen or KL 7000 Halogen can easily be converted to the KL 7000 LED The beacon has low power consumption and a high light output ratio thanks to the rotating lighting function Lamp Type: LED - Number of LEDs: 8 - Power consumption: 9W With rotating warning signal - Lens Colour: Blue

Made by Magneti Marelli Right Side, Passenger Rear Lamp Backup Light / Rear Fog Light / Without Bulb Holder

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 13W With rotating warning signal …

The light output is a powerful 1,700 lumens. The light is distributed by a specially developed multi-facetted reflector and ensures homogeneous illumination. The black housing of this worklight is made of aluminium and is equipped with cooling fins. These ensure the necessary heat dissipation of the 8 high-power LEDs. The integrated electronics protect the device in case of reverse polarity and guarantee constant brightness even with fluctuating operating voltage. A sensor also protects the worklight from overheating. Only in this way can the long service life of the LEDs be fully exploited. The integrated electronics are protected against polarity reversal and equipped with an LED error …