Car Bulbs

Technology transfer: We transfer our OE know-how directly to the independent parts market Original equipment quality with high market coverage: Suitable spare parts for many vehicles Lamp Type: LED - for trailer ECE approved paired article number: 2PT 010 680-011

Lamp Type: LED - Number of LEDs: 2 - without holder Light functions: 2 - with reflector/with side marker light (LED) ADR/ GGVS Checked - Appr. stamp: E17 0072/ECE

The innovative Light Guide technology has been applied for the first time in a side marker luminaire. It creates a slim, linear night design. The homogeneous light distribution is pioneering Sealed to withstand high pressure cleaning: Tested according to HELLA standard 67101, IP 6K9K, protected against high pressure and steam jet cleaning LED technology offers maximum reliability and vibration resistance. An extremely long service life of the luminaire is therefore achieved By combining efficient light-emitting diodes (LEDs) and precision optics in Light Guide design, the luminaires achieve an optimum signal pattern with extremely low power consumption The Light-Guide optics create a continuous …

The innovative Light Guide technology has been applied for the first time in a side marker luminaire. It creates a slim, linear night design. The homogeneous light distribution is pioneering Sealed to withstand high pressure cleaning: Tested according to HELLA standard 67101, IP 6K9K, protected against high pressure and steam jet cleaning LED technology offers maximum reliability and vibration resistance. An extremely long service life of the luminaire is therefore achieved By combining efficient light-emitting diodes (LEDs) and precision optics in Light Guide design, the luminaires achieve an optimum signal pattern with extremely low power consumption The Light-Guide optics create a continuous …

2 holes for fixing screws B4.2 Flash function suitable

All signal functions of this luminaire series are equipped with a wide-beam optic, which provides excellent lateral visibility and thus contributes to road safety True to HELLA's "Fit and Forget by Design" philosophy, the Slimline product range is characterised by low power consumption, robust design and resistant Grilamid lens These luminaires are tested to IP 6K7 and IP 6K9K and protected against the ingress of dust and water when temporarily submerged The luminaires are tested according to HELLA standard 67101 and meet the requirements for buses, commercial vehicles, trucks and tractors over 6.5 tonnes Reverse polarity protection: Incorrect contact between poles ensures that the luminaire …

LED brake light for surface mounting - with ECE / CCC approval The brake light has 1 light function: Brake light Red light, with 6 LEDs and 500 mm cable, clear lens with optics Lamp Type: LED - Number of LEDs: 6 Light functions: 1 - with stop light (LED) ECE approved/CCC approved

Length: 198.1mm - Width: 40mm - Height: 25mm - Lamp Type: LED - Number of LEDs: 2 Light functions: 1 - with indicator (LED) Appr. stamp: E24 5974/ECE Fastening Type: for horizontal fastening

Halogen indicator position light for front surface-mounting (left / right, horizontal) - with ECE approval The flashing light has 2 light functions: Flashing light / position light. flashing light yellow, position light white Lamp type: P21W/R5W, without bulbs, without plug-in connection, 2 fixing screws M5, black plastic housing Width: 80mm - Height: 55mm - Lamp Type: R5W/P21W - without bulbs/without plug Light functions: 2 - with position light/with indicator Housing Colour: Black

Halogen indicator position light for front surface-mounting (left / right, horizontal) - with ECE approval The flashing light has 2 light functions: Flashing light / position light. flashing light yellow, position light white Lamp type: C5W/P21W, without bulbs, 2 holes Ø 5.2 mm for fixing screws Ø: 82mm - Height: 48mm - Lamp Type: C5W/P21W - without bulbs Light functions: 2 - with indicator/with position light Prot.type (IP Code): IPX9K/IP5KX Colour: Yellow

Halogen indicator position light for front surface-mounting (left / right, horizontal) - with ECE approval The flashing light has 2 light functions: Flashing light / position light. flashing light yellow, position light white Lamp type: P21W/R5W, without bulbs, without gasket, with grommet, 2 fixing screws B3.9 x 16 Length: 158mm - Width: 64mm - Height: 51mm - Lamp Type: R5W/P21W - without gasket/seal - without bulbs Light functions: 2 - with position light/with indicator ECE approved Housing Colour: Black - Colour: Yellow/White

Halogen indicator for front, side or rear installation (left / right, horizontal) - with ECE approval The flashing light has 1 light function: Flashing light Lamp type: P21W, without bulbs, 2 holes for fixing screws B4,s or M4, black plastic housing Length: 166mm - Width: 73mm - Height: 59mm - Lamp Type: P21W - without bulb - without bulbs Light functions: 1 - with indicator ECE approved Housing Colour: Black - Colour: Yellow

Halogen indicator light Ø 122.5 mm for rear surface-mounting / flush-fitting (left / right) - with ECE approval, ADR/GGVS-tested The flashing light has 1 light function: Flashing light Lamp type: P21W, without bulbs, with grommet, with 2 fixed fixing screws M6 x 25, housing made of black plastic Attention: Depending on the mounting position, the water drainage opening must be broken out! See assembly instructions. Housing made of black plastic. Ø: 123mm - Height: 83mm - Lamp Type: P21W - without bulbs Light functions: 1 - with indicator ADR/GGVS approved

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E4 6550/ECE Fastening Type: for vertical fastening/for horizontal fastening

fits e.g. Landini (please check exact vehicle application) - Light Design: Bulb - Lamp Type: PY21W Light functions: 1 - with indicator paired article number: 2BA 247 016-041 with bulb/with bulb holder Indicator lamp (left) - with ECE approval The flashing light has 1 light function: Flashing light Lamp type: PY21W, lens crystal clear, with lamp holder

Light Design: Bulb - Lamp Type: PY21W Light functions: 1 - with indicator paired article number: 2BA 247 015-031 with bulb/with bulb holder Indicator lamp (right) - with ECE approval The flashing light has 1 light function: Flashing light Lamp type: PY21W, with 24V bulb, with lamp holder

State-of-the-art LED technology enables an optimum signal image with low power consumption Reverse polarity protection: Incorrect contact between poles ensures that the luminaire is not damaged Tested according to HELLA standard 67101,IP 6K9K, protected against high pressure / steam jet cleaning. The luminaires are tested according to HELLA standard 67101 class 4.1. The high vibration resistance makes this product ideal for use in heavy construction machinery. Ø: 55mm - Height: 64mm - Lamp Type: LED - Number of LEDs: 3 Light functions: 1 - with indicator (LED) Prot.type (IP Code): IP6K9K

Stylish, contemporary clear glass design Optimised light output Reverse polarity protection prevents damage due to faulty contacting Extremely long service life thanks to the use of high-performance LEDs Ø: 66mm - Height: 42mm - Lamp Type: LED - Number of LEDs: 12 - without screw Light functions: 1 - with indicator (LED) Prot.type (IP Code): IP5KX/IPX9K

Stylish, contemporary clear glass design Optimised light output Reverse polarity protection prevents damage due to faulty contacting Ø: 66mm - Height: 79mm - Lamp Type: P21W - without screw Light functions: 1 - with indicator Prot.type (IP Code): IP5KX/IPX9K Housing Colour: Silver

Halogen indicator for rear or front installation (left / right, horizontal) - with ECE approval The flashing light has 1 light function: Flashing light Lamp type: PY21W, without bulbs, lens crystal clear, without optics, indicator colour yellow Width: 133mm - Height: 133mm - Lamp Type: PY21W - without bulbs Light functions: 1 - with indicator SAE approved - Prot.type (IP Code): IPX9K/IP5KX Housing Colour: Grey

LED indicator light (tail lift light) for rear mounting on tail lifts - with ECE approval, without indicator failure check The flashing light has 1 light function: Flashing light With 12 yellow LEDs, 2 fixing screws M6, with moulded leads, zinc die-cast housing Length: 108mm - Height: 75mm - Lamp Type: LED - Number of LEDs: 12 - without indicator failure control Light functions: 1 - with indicator (LED) ADR/GGVS approved/ECE approved - Prot.type (IP Code): IPX9K/IP6K7 Colour: Yellow

Lamp Type: PY21W - with bulb Light functions: 1 - with indicator Appr. stamp: E1 878/ECE

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E1 42764/ECE

Lamp Type: P21W - without bulbs Light functions: 1 - with indicator Appr. stamp: E1 42763/ECE