Circulation Pumps

Stainless steel housing, 90 degrees rotated flanges, three speed motor (Low/Med/High) - Max head: 21 feet Built-in motor protection for longer life and better performance. - 24/30 months warranty on material/workmanship Suitable for a wide range of applications, including water and glycol radiant floor heating, hydronic heating, fan coil heating, solar water heating, etc... Whisper-quiet operation for sound sensitive installations Includes (2) Gaskets (O-rings) / UL/CSA listed - Made in France

Grundfos 15-50 | 15-60 Genuine OEM Replacement Universal Pump Head - Hanicks Fits: See full description below, or alternatively if you are still unsure please contact our Hanicks Heating & Spares Tech Team on 01302 279234 with your boiler GC No. to hand. Genuine Part

Grundfos COMFORT pumps, are specifically designed for recirculating domestic hot water in pressurised systemsThe pump is equipped with a spherical motor. Unlike the conventional canned-rotor motors, the spherical motor does not have a rotating bearing shaft. The stator transfers the magnetic field to the rotor in the water-conducting part of the pump. The pump is only suitable for pressurised hot water systems.The water-conducting part of the pump is hermetically separated from the stator with a stainless steel spherical separator.Features and BenefitsThe pump is characterised by:Lowest energy consumption and highest comfort due to the unique AUTOADAPT (only AUTO version)High-quality bearing

With the addition of the MAGNA1 range Grundfos can now deliver the required high energy efficiency, but with a reduced set of features. These pumps can offer the perfect solution in a refurbishment situation where you need to either replace a Grundfos UPS product or one of the smaller models from the original Magna family. These pumps are designed for circulating liquids in heating systems with variable flows where it is desirable to optimise the settings of the pump duty point, thus reducing energy costs.The MAGNA1 range of circulators comes complete with electronically controlled motors that are based on permanent magnet (PM) and stator technology. They are designed for circulating liquids

Grundfos Amazon 2 0 Bar Negative Brass Twin Shower Pump Product type: WATER PUMP

power saving and economy of boiler fuel ease of installation and use long failure-free performance materials and parts are resistant agains aggressive water enviroment and do not require additional maintenance pump design allows to separate control unit from the pump in case of failure or maintenance

1/2" bronze union sweat fitting set for use with UP15 18SU & UP25 64SU

Wet rotor circulation pump for hot water heaters of all systems and air conditioning applications The green button technology provides maximum user comfort with new intelligent settings, intuitive user interface and new features Increased energy efficiency thanks to an improved energy efficiency index, insulation shells included and accuracy settings of 0.1 m Quick and easy installation and hassle-free replacement thanks to new, optimized design High operational safety thanks to automatic and/or manual restart (deflection function) and manual ventilation function

Grundfos Magna1 D 40-150 F 250 1X230V Pn6/10 Grundfos circulating pump Product measurements: 51.2 x 25 x 37.2 centimeters Manufacturer reference: Grundfos 99221311 Grundfos stands out within the sector for the manufacture and sale of water pumping systems for heating

Wet rotor circulation pump for hot water heaters of all systems and air conditioning large LC display for displaying the current power consumption, cumulative kWh and volume flow Wilo connector for a fast electrical wiring - without tools Precise adjustment options thanks to functions and modes on the LC Display and enabled directly by green button technology Optimized Dynamic ADAPT function, manual vent routine and automatic debrocking function for efficient and secure operation

High-efficiency pump with EC permanent magnet motor technology (electronically commutated motor) Suitable for use in solar systems with variable or constant flow rate Speed can be controlled via a signal supplied by the solar system controller Without PWM signal, the Alpha Solar can be set to one of four constant speeds Quick and easy installation - easy installation and maintece-

Cast iron housing, 90 degrees rotated flanges, three speed motor (Low/Med/High) - Max head: 16 feet Built-in motor protection for longer life and better performance. - 24/30 months warranty on material/workmanship Suitable for a wide range of applications, including water and glycol radiant floor heating, hydronic heating, fan coil heating, solar water heating, etc... Whisper-quiet operation for sound sensitive installations Includes (2) Gaskets (O-rings) / UL/CSA listed - Made in France

Grundfos UPM3 Car High Efficiency Pump 25-70 180 230 V Type: UPM 3 car 25-70. power consumption P1:5 .. 52 W. rated voltage: 230 V/50 Hz. diameter/nominal dimension: 1 1/2 inch / DN 25 1 inch Protection class (according to IEC 34-5): IP44. energy efficiency index (EEI): 0.20. approvals: VDE Pump housing: grey cast iron, maximum ambient temperature: 70 °C, density: 965.3 kg/m³ Max. Operating pressure: 10 bar. installation length: 180 mm. media temperature range: 2 - 110 °C. terminal box position: 9H

The Grundfos UPA 15-90 N is a small stainless steel circulator pump designed for water pressure boosting in domestic properties to provide additional pressure to hot and cold water taps and similar outlet points.The UPA 15-90 N is mainly for use in open vented systems, but may also be installed directly on the incoming water mains supply to feed a combination boiler, provided approval has been obtained from the local water company.Features:Automatic or manual operationTypically adds between 0.5 bar and 0.75 bar of pressure to the inlet pressure at the pumpSuitable for water temperatures up to 70°CLow noise levelThe pump incorporates a flow switch which starts and stops the pump according to

The latest additions to the Grundfos UPS2 circulator family of British built pumps the UPS2 32-80 and 25-80. These pumps have been specially designed to augment the current range and provide 8 metre options.Offering a number of distinct benefits, these pumps deliver enhanced efficiency that meets the latest EuP/ErP requirements, while the dimensions will ensure straightforward replacement with older UPS generations. These circulators have new more powerful motors and improved hydraulics which makes them perfect for use in a range of large domestic and small commercial applications as they can deal with a flow rate of 5.7 m/h and a system pressure up to 10 bar.

Pump

Grundfos UPS3 15 50 65 130 Model A Domestic Heating Circulating Pump 99199622 Genuine Part Brand : Grundfos Product type: BUILDING MATERIAL

Ceramic rotor shaft Installation height: 180 mm Delivery head: 6 m Diameter of connections: 1 ½ inch / 1 inch Box contents include the screw connections

Wilo A-rated Pump + Mixer Set Blending Valve Thermostatic control the flow temperature of water to the underfloor heating pipe Temperature range: 35C - 65C Max working pressure: 10 bar Compression type connections for ease of installation DELIVERY TO UK MAINLAND ONLY

Original Wilo quality