Circulation Pumps DAB Pumps

The DAB VS 65/150-3 M is a circulation pump suitable for hot water circulation in a pressurired closed or open circuit, domestic heating and air conditioning systems. The pumps operates at three speeds Single body consisting of the cast iron hydraulic section and the wet rotor motor. Die-cast aluminium motor casing. Technopolymer impeller. Tempered stainless steel motor shaft on graphite bushings lubricated by the pumped liquid. Stainless steel rotor liner, stator liner and closing flange. Ceramic thrust ring, silicon seal rings, and brass air breather plug. The wet rotor asynchronous two-pole motor is protected as far as resistance, and does not require overload protection.

The Vortex BWO155 R ZM ½” domestic hot water pump incorporates a mechanical timer that can be rotated through 360° to set a daily programme in 15-minute increments. The pump housing is made of brass and the easy-clean rotor is of stainless steel. Pump max. delivery head: 1.3 metresMax. delivery rate: 950 l/hrCompression strength: 10 barTemperature resistance: 95°CMotor voltage: 230v/50 HzProtection class: IP 42

Evosta 3, DAB first own Smart circulator, offers unique features thanks to the DAB 4.0 factory which represents a great leap forward in terms of assisting the installer and improving the performance of the domestic cooling or heating systems.TECHNICAL DATAOperating range: 0,4-4,2 m3/h with head up to 8+ metres.Pumped liquid temperature range: from -10 °C to +110°CWorking pressure: 10 bar (1000 kPa)Protection class: IPX5Insulation class: FInstallation: with horizontal motor axis.Standard power input: single-phase 1x230 V~ 50/60 HzPumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

Evosta 3, DAB first own Smart circulator, offers unique features thanks to the DAB 4.0 factory which represents a great leap forward in terms of assisting the installer and improving the performance of the domestic cooling or heating systems.TECHNICAL DATAOperating range: 0,4-4,2 m3/h with head up to 8+ metres.Pumped liquid temperature range: from -10 °C to +110°CWorking pressure: 10 bar (1000 kPa)Protection class: IPX5Insulation class: FInstallation: with horizontal motor axis.Standard power input: single-phase 1x230 V~ 50/60 HzPumped liquid Clean, free of solids and mineral oils, non-viscous, chemically neutral, with properties similar to water (glycol max 30%)

This DAB Bronze VS 65/150 Class F Hot Water Circulating Pump is for hot water circulation in hot water domestic systems of the closed and pressurised or open tank type.Construction features Single body formed of the bronze hydraulic unit.Diecast aluminium motor casing.Technopolymer impeller.Ceramic driving shaft mounted on graphite brushings lubricated by the pumped liquid itself.Stainless steel protective rotor sleeve, stator sleeve and closing flange.Ceramic thrust bearing, E.P.D.M. O rings.The two-pole or four-pole asynchronous motor with wet rotor is self-protected for resistance.No overload protection required.Protection level: IP 44 Insulation class: F Cable grommet: PG 11 Installation: …