Sewer Pipes

The McAlpine Waste Valve 1.1/4" Tundish Macvalve-3 is a plumbing component used in waste and drainage systems. The valve is designed to allow waste water to flow out of a plumbing system while preventing gases and odors from entering the living space. The valve includes a tundish, which is a small device that allows air to enter the system and prevents the waste water from siphoning back into the plumbing fixtures. The Macvalve-3 model is specifically designed for use with a 1.1/4" waste pipe. It is made by McAlpine, a leading manufacturer of plumbing products in the UK. Installation of the McAlpine Waste Valve 1.1/4" Tundish Macvalve-3 should be done by a qualified plumber, following local …

The McAlpine WC-CON4A is a rigid WC (water closet) connector used to connect a toilet pan to a soil pipe. It has a 97-107mm inlet that fits the outlet of the toilet pan and a 4"/110mm outlet that fits the soil pipe. The 40mm offset allows the connector to be installed at a slight angle if necessary, to accommodate the position of the soil pipe. Here are some additional details about the McAlpine WC-CON4A: It is made from durable, high-quality materials to ensure a long lifespan. The connector is easy to install and is compatible with most toilet pans and soil pipes. It features a secure, leak-proof seal to prevent any water or waste from escaping. The 40mm offset can be adjusted to suit your …

The McAlpine WC-CON4B is a rigid WC (water closet) connector designed to connect a toilet pan to a 4"/110mm soil pipe. It has a 97-107mm inlet, which means it can fit a toilet pan with a spigot diameter within that range. The outlet of the connector is 4"/110mm, which is the standard size for a soil pipe in the UK. The 40mm offset refers to the distance between the centre of the inlet and the centre of the outlet. This offset allows the connector to be used in situations where the toilet pan outlet is not directly above the soil pipe. The offset enables the pan to be positioned slightly to the side, which can be useful when dealing with awkward plumbing layouts. Overall, the McAlpine WC-CON4B …

component used to prevent foul smells and gases from entering a building through the drain pipes. This trap is suitable for use in domestic and commercial plumbing applications and is designed to be fitted below a sink or basin. The trap has a 38mm water seal which effectively blocks gases and odors from passing through the trap and into the building. It also features a 1.5" multifit outlet which allows it to be connected to a wide range of waste pipes and fittings. The McAlpine G10 38mm Water Seal Bottle Trap is made from durable materials and is designed to withstand the pressures and demands of regular use. It is easy to install and maintain and can be cleaned quickly and easily when required.…

The McAlpine DC1GR-OS 4"/110mm 14mm Offset Drain Connector with 'O' Seal Socket is a plumbing component designed to connect a 4"/110mm pipe to a drain. The 'O' Seal Socket provides a secure and watertight connection between the connector and the pipe. The 14mm offset design of the connector allows for some flexibility in the positioning of the pipe in relation to the drain, making it easier to install in tight spaces or awkward angles. The BS 4514 specification refers to a British Standard for unplasticized polyvinyl chloride (PVC-U) pipes and fittings for the conveyance of water under pressure, including drainage and sewerage applications. Overall, the McAlpine DC1GR-OS 4"/110mm 14mm Offset …

The McAlpine WC-CONQ is a rigid WC (water closet) connector designed to connect the toilet pan to the soil pipe (drainage pipe). It is a space-saving bend connector that allows for easy installation of toilets in tight spaces. The WC-CONQ has a 97-107mm inlet and a 4"/110mm outlet, and it features a 90 bend that can be adjusted in length to fit various toilet pan positions. The adjustable length feature allows for flexibility in installation and ensures a secure and watertight connection between the toilet and the soil pipe. Overall, the McAlpine WC-CONQ is a high-quality and reliable solution for connecting toilets to the drainage system, especially in situations where space is limited. 102mm …

The McAlpine WC-CONQP is a toilet pan connector that is designed to connect a horizontal outlet toilet to a vertical soil stack or to a drain pipe. It has a 97-107mm inlet and a 4"/110mm outlet, and it features a 90 space-saving bend that allows for a more compact installation. One of the key benefits of the McAlpine WC-CONQP is its adjustable length. This feature allows you to customize the connector to fit your specific installation requirements, making it a versatile option for a wide range of toilet installations. In addition to its adjustable length, the McAlpine WC-CONQP is also made from rigid materials, which ensures that it maintains its shape and integrity over time. This helps to …

The McAlpine MACLINK is an adjustable length linking WC (water closet) connector designed to connect two toilet pans to a soil pipe. The connector has a 4"/110mm outlet, which means that it can fit a range of different soil pipe sizes. The main feature of the MACLINK is its adjustable length, which allows the connector to extend between 200mm to 350mm. This feature can be useful when the distance between the toilet pans and soil pipe is longer than usual, or when there is an unusual layout of the bathroom. The MACFIT technology used in the McAlpine MACLINK connector makes installation quick and easy. The connector simply pushes into the soil pipe and onto the toilet pans without the need for …

The McAlpine MINIFLEX-4 Miniflex Connectors are a type of plumbing connector that offer maximum flexibility when conventional fittings cannot be used. They are designed to connect pipes of different materials and sizes, making them ideal for use in a wide range of plumbing applications. The MINIFLEX-4 connectors are made from high-quality, flexible PVC material that allows them to bend and twist easily without kinking or collapsing. They can be used to connect pipes with diameters ranging from 32mm to 50mm, and can be used with pipes made from PVC, ABS, copper, and steel. The connectors feature push-fit ends that make installation quick and easy, and they can be installed in tight spaces where …

The McAlpine 2" X 2" Self Sealing Valve is a plumbing fitting used to provide a secure and reliable connection between two pipes of the same size. The valve is designed to be self-sealing, which means that it automatically seals when the connection is broken, preventing the flow of water or other fluids. The valve is commonly used in plumbing systems where a quick and easy shut-off is required, such as in washing machines or other appliances. The self-sealing feature of the valve prevents leaks and minimizes the risk of water damage in the event of a malfunction or repair. The McAlpine 2" X 2" Self Sealing Valve is made from high-quality materials such as brass or plastic, depending on the specific …

The McAlpine WC-CON16 is a rigid WC (water closet) connector that is designed to connect a toilet pan to a drainage pipe. It has a 97-107mm inlet and a 4"/110mm outlet with a 45 angle. The 97-107mm inlet is designed to fit standard toilet pan spigots, while the 4"/110mm outlet is compatible with standard drainage pipes. The 45 angle helps to ensure that the connector fits comfortably and securely in tight spaces. This connector is made from high-quality, durable materials that are designed to last for a long time. It is easy to install and provides a secure, leak-free connection between the toilet and the drainage pipe. Overall, the McAlpine WC-CON16 is a reliable and high-quality connector …

John Guest Speedfit female coupler tap connector push-fit fitting for the connection of plastic or copper pipes to a male thread fixture or appliance. The female coupler is ideal for the connection of taps and toilets. Simply push the push-fit fitting fully onto the pipe and hand turn onto the thread. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The John Guest Speedfit female coupler tap connector is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit and hand-tighten connection …

The McAlpine 3/4" In-Line Screened/Filter Pipe Coupling is a plumbing fitting that is designed to connect two 3/4" pipes together while also incorporating a filter screen into the connection. The filter screen is designed to prevent debris and other particles from entering the pipes and causing blockages or damage to the plumbing system. This type of coupling is commonly used in residential and commercial plumbing applications, particularly in situations where there is a risk of debris or sediment entering the pipes, such as in areas with hard water or where there is a high concentration of minerals in the water supply. The McAlpine 3/4" In-Line Screened/Filter Pipe Coupling is made from durable …

The McAlpine WP2H is a white plastic plug with a rubber seal and handle designed for use in plumbing systems. Like the WP2 plug, it is designed to fit into the end of a waste pipe or other plumbing fixture to prevent the flow of water or other fluids. The WP2H plug is made from high-quality plastic material that is resistant to corrosion and damage from chemicals. The rubber seal provides a watertight and secure fit, preventing any leaks or smells from escaping the pipe or fixture. The handle on the plug allows for easier installation and removal of the plug, making it a convenient solution for plumbing maintenance and repairs. The WP2H plug has a larger diameter than the WP1 plug, making it …

The McAlpine WP4T is a high-quality white PVC plug designed for use in plumbing applications. The plug has a diameter of 1 3/4 inches and is made from durable PVC material that is resistant to corrosion and chemical damage. The plug is designed to fit snugly into standard sized pipes to provide a watertight seal. One of the key features of the WP4T plug is its triangle shape, which allows for easy installation and removal with a suitable tool. The triangle shape also provides a secure grip for the plug, making it easy to tighten and remove as needed. This plug is suitable for use in a wide range of plumbing applications, including in domestic, commercial and industrial settings. It is also suitable …

The McAlpine 1 3/4" X 1 1/2" Bsp Female X Bsp Male Coupling T12B is a plumbing fitting used to connect two pipes of different sizes. It has a female end with a 1 3/4" BSP (British Standard Pipe) thread and a male end with a 1 1/2" BSP thread. This coupling is made of durable and corrosion-resistant materials to ensure long-lasting performance in plumbing systems. It is easy to install and provides a secure, leak-free connection between pipes. This coupling can be used in various plumbing applications, such as in water supply systems, heating systems, and waste systems. Available in 9 sizes Waste Outlet Reducer

The McAlpine BATHTRAP50-CPB is a bath trap designed to prevent odours and gases from entering the bathroom through the waste pipe. It has a 50mm water seal to prevent the backflow of gases from the drainage system, and a chrome-plated brass finish for an aesthetically pleasing appearance. The bath trap features a 1.5" universal outlet, which means it can be connected to most standard waste pipes. The universal outlet also allows for easy installation and maintenance. Overall, the McAlpine BATHTRAP50-CPB is a high-quality bath trap that provides effective protection against unpleasant odours and gases. Its chrome-plated brass finish also makes it a stylish addition to any bathroom. Available …

The McAlpine Adaptor 50mm Pushfit to 2" Solvent Waste Hcup50Ukadap is a plumbing component used to connect a 50mm pushfit waste pipe to a 2-inch solvent waste pipe. The adaptor is made from durable plastic and has a push-fit connection on one end and a solvent weld connection on the other. The push-fit end of the adaptor is designed to fit snugly onto the end of a 50mm waste pipe without the need for any additional fixings or adhesives. The solvent weld end of the adaptor is designed to be glued or welded onto the end of a 2-inch solvent waste pipe. The McAlpine Adaptor 50mm Pushfit to 2" Solvent Waste Hcup50Ukadap is a versatile plumbing component that can be used in a wide range of applications.…

The McAlpine STW4-RB is a 50mm water seal resealing shower trap with a multifit outlet. It is designed to provide a reliable and efficient way to prevent unpleasant odors and gases from entering your home through your plumbing system, particularly in shower installations. The trap features a 50mm water seal to prevent gases and odors from escaping, and a resealing mechanism that allows water to pass through while closing off the trap when not in use. This mechanism helps to prevent foul smells from entering your home, while also ensuring that the trap remains clear and free-flowing. The McAlpine STW4-RB shower trap also features a multifit outlet, which allows it to be used with a variety of …

The McAlpine STW8-RB is a 50mm water seal resealing shower trap with a multifit outlet. It is designed to be used in conjunction with standard 1.5" UK plumbing and is suitable for use with most shower trays and enclosures. The water seal on the STW8-RB trap prevents foul odours from escaping from the drainage system, while the resealing feature ensures that the trap remains effective even if the water in the trap evaporates. The multifit outlet on the trap allows it to be connected to a variety of waste pipes, making it a versatile option. The trap is constructed from high-quality materials to ensure durability and long-lasting performance, and is easy to install. It has a low profile design,…

The McAlpine STW4M-95 is a shower trap designed to provide a reliable and efficient drainage solution for showers. It features a 50mm water seal and a universal outlet, making it suitable for use with a range of plumbing systems and shower configurations. The trap design of the McAlpine STW4M-95 ensures that water is quickly and efficiently drained away, preventing any blockages or water damage. The trap also helps to prevent any unpleasant odours from escaping. When installing the McAlpine STW4M-95 shower trap, it is important to ensure that the trap is securely fitted and sealed to prevent any leaks or water damage. The trap should be installed with appropriate tools and materials, following …

The McAlpine TSG50WH 50mm Water Seal Trapped Gully is a plumbing component that is used to collect wastewater from various sources and channel it into the drainage system. It is suitable for use in both commercial and residential plumbing installations. The TSG50WH gully features a water seal of 50mm that prevents unpleasant smells and gases from entering the living space. The gully also has a two-piece design consisting of a clamp ring and cover plate that can be easily removed to access the gully for maintenance and cleaning purposes. The gully is designed with a 2" horizontal outlet and a 2" x 1.5" socket reducer that makes it compatible with different types of waste pipe sizes. This versatility …

The McAlpine TSG50SS is a 50mm water seal trapped gully that is designed for use in wet room and shower installations. It is made from high-quality materials and features a clamp ring and cover plate that provide a secure and watertight seal. The gully has a 2" horizontal outlet and a 2" x 1.5" socket reducer that makes it easy to connect to the waste pipe. The water seal design prevents foul odours and gases from entering the room, making it a hygienic and safe option for wet room installations. The McAlpine TSG50SS trapped gully is easy to install, and the removable trap makes it easy to clean and maintain. The clamp ring and cover plate are also designed to be easily removed for cleaning …

The McAlpine TSG50-T150SS is a 50mm water seal trapped gully designed for use in wet room and shower installations. This model features a tile/grating design with a removable grid, allowing for easy access to the trap for cleaning and maintenance. Like other McAlpine trapped gully models, the TSG50-T150SS features a 2" horizontal outlet and a 2" x 1.5" socket reducer for easy connection to the waste pipe. The water seal design prevents foul odours and gases from entering the room, ensuring a hygienic and safe environment for users. The tile/grating design of this model provides a customizable look that can match the surrounding tiles or decor, and the removable grid makes cleaning and maintenance …