Security Sensors

▶ Uses infrared energy as a precise control signal for reliable performance
▶ Activates devices as soon as they enter the 120-degree detection area for quick action
▶ Detection range up to 12 meters for comprehensive security and monitoring
▶ Adjustable delay time from 10 seconds to 15 minutes for flexible control options
▶ Twilight sensor detects day and night. Choose between night only or day only for maximum customization
▶ Prevents false triggers from small animals up to 20 kg for hassle-free functionality

The LED wall light with motion sensor from Brennenstuhl can be flexibly mounted on the wall without any cables. Regardless of whether simple installation indoors or outdoors is required, the wall spotlight has IP44 protection and is therefore ideally suited for both locations. In addition, the wall lamp has the following convincing.Features:- LED spotlight with batteries for easy wall mounting completely without cable - lighting duration with one set of batteries approx. 800 days with 6 switches daily- Wall Light with a switch-on time of up to 30sec adjustable - lamp head can be tilted and swivelled- The LED Lamp with motion sensor is suitable for all indoor and outdoor applications, e.g. garages,…

Luminaires activated by sensor mode or conventional wall switch
Operating mode easily changed by three clicks of wall switch
Motion sensor (microwave technology) with adjustable detection parameters
Easy and quick installation
Corridors, entrance areas
Newest and sustainable LED technology. no regular bulb included
This product is a containing product. containing products are luminaires that can be disassembled for a separate check of the light source(s) they contain

Energy savings of up to 90% compared to halogen lamp floodlights
Rugged IP65 protected daylight and motion sensor with adjustable sensor head
Opal toughened safety glass cover for even illumination with low glare
Easily configure distance, daylight and motion detection, and disable the sensor
Ready to connect product with 1 m cable length and prepared wire ends
This product is a containing product. containing products are luminaires that can be disassembled for a separate check of the light source(s) they contain

The Philips LED ceiling fan light offers a quiet motor, circulating the air in the room without loud noise.
Say goodbye to spinning shadows on the ceiling: this fan has transparent blades that can be folded into the light and out of sight when not in use.
The Philips LED ceiling fan light is designed to ensure powerful air circulation and continued reliability over time. Its wide blade design allows a large coverage of air volume to ensure maximum airflow for cooling.

This is also why the L 560 S wall SensorLight is such a popular choice for home and garden
The classic design is underlined by extra detailing, such as the glass shades with decorative bubble effect and hand-blown by craftsmen
The motion sensor has a 140° detection zone and up to 12 m reach
The detetcion zone can be adapted by adjusting the sensor, which tilts through 65° and turns through 130°
The angle of detection can also be redued by using the shrouds provided
Time and twilight threshold can easily be adjusted by control dials underneath the sensor
The outdoor sensorlight L 560 S is perfect for building fronts and entrances. Bulbs are not included…

Keep an eye out from anywhere. No matter where you are, you can keep an eye on your home. Get real-time alerts directly on your mobile device when a sensor is opened. Feel suspicious? Trigger a light alarm with the Hue app. You can even see what time the sensor was last triggered and if someone has tampered with it.
Trigger your lights. Use the Secure contact sensor to turn your lights on when it opens – perfect for frequently used areas. Have the hallway light turn on when the front door opens, for example.
Get it all with the Philips Hue Bridge. A Bridge gives you the full suite of smart home security features: light and sound alarms, the Mimic presence automation and the ability to expand yo…

Weather-proof design
Set timers for your convenience
High-quality aluminum and superior synthetics

Light up a room simply by walking in and control the intensity by the time of day, such as a gentle, warm nightlight to help you navigate your home at night.
Battery powered, wireless, and installation free, this Hue Motion Sensor requires the Hue hub (sold separately) to work, connecting to your Hue system with control via the Philips Hue App.
Place it anywhere in your home including your hallway, bathroom, kitchen, and more. The integrated light sensor saves energy by detecting when rooms are vacant and automatically turning off lights.
Make it part of your Hue home lighting system with Hue accessories (sold separately) such as the Hue Tap or Hue Motion Sensor. Control by voice with Amazon …

Compatible with Z-Wave plus
Low battery warning
Wireless Control Button
Mini remote control with 6 buttons
Voltage: 3.0
24 different actions: 1x / 2x / 3x push and hold down for every button
Supports Z-Wave network security mode with AES-128 encryption
FGKF-601

Allows for contactless gesture detection
Gesture controlled menu allows you to operate the device without dismantling it
Battery and/or VDC powered
Compatible with any Z-Wave or Z-Wave+ Controller
Supports protected mode with AES-128 encryption

door guard with alarm
Sequential Logic Input (SLI)
Vertical positioning inside
Surveillance cameras, surveillance cameras, LCD screens

Compatible with any Z-Wave or Z-Wave+ Controller
Supports protected mode (Z-Wave network Security Mode) with AES-128 encryption
Works with other Z-Wave network devices, but as a battery device doesn’t take part in signal routing
Door/window opening detected through separation of Sensor’s body and a magnet
Built-in temperature sensor

Works with LED Lamps
Power metering
Acts as a Z-Wave range extender. Compatible with any Z-Wave or Z-Wave+ Controller.
Dimmable LED lamps. Power Consumption is lesser than 0.8W
Use with any dimmable light source up to 250W

Thanks to the smart Zigbee motion sensor, you will receive notifications via the free Brennenstuhl Connect app on your smartphone or tablet as soon as motion has been detected - for even more safety
The practical history function allows accurate time representation of the detected movements, so you can track the detected movements at any time and from anywhere
The Zigbee motion sensor can not only be used as a warning detector, but also allows you to control the lighting - control other smart Brennenstuhl Connect products depending on this motion detector
The Zigbee motion sensor is suitable for indoor use and detects movements in a detection range of maximum 10 m
For setting up and controlling …

Features: Alarm activates upon detection of motion Wireless accessory Easy to fit Suitable for pets under 25kg Detection range 110degrees with a 12m radius Compatible with HSA Alarms only 2yr guarantee Specifications: Colour: White Guarantee:2 Years Batteries Required: Yes Model Number: 666021001001 Self Assembly Required: Yes

Somfy Remote Serenity io Tahoma compatible
The TaHoma remote is used to control security products which you can combine with TaHoma
You can choose full or partial activation of programmed zones within your home
The easy to use interface allows the creation of zones to be assigned to your TaHoma remote for better control over your connected security products
This remote is equipped with a panic button to be used in case of an emergency or when an intruder is detected
The buttons are placed securely so it won't be activated accidentally

High energy saving sensor
Safe outdoor use thanks to IP55 protection class
Built-in light and motion sensor
Detection threshold of daylight sensor 1 to 1000 lx and controllable switching time 2 seconds to 15 minutes
Detection angle: 180 degrees.
Newest and sustainable LED technology. no regular bulb included
This product is a containing product. containing products are luminaires that can be disassembled for a separate check of the light source(s) they contain

Presence Detector / Range 10 m / Automatic Shutoff 15s - 30 min / For Indoor / Ceiling Installation

Technische Daten Nennspannung: 240 VMontageart: DeckeneinbauFarbe: weißAusführung: PräsenzmelderUnterkriechschutz/Rückfeldüberwachung: jaFrequenz: 50 - 60 HzWerkstoffgüte: sonstigeMax
Reichweite zu einer Seite: 12mMax
Schaltleistung: 2300 WTemperature: -25 - 50 °CMax
Einschaltstrom: 165 AWerkstoff: KunststoffAnsprechempfindlichkeit einstellbar: jaAnsprechhelligkeit: 20 - 2000 lxErfassungsfeld Durchmesser auf Fußboden: 24 mFernbedienbar: jaNebenstelleneingang: jSteuaaSteuerm: 2 mATeach-Funktion für Ansprechhelligkeit: jaSchutzart (IP): IP20Ausführung der Oberfläche: mattMin
Size: 15 sMax

PIR Sensor / Range 15 m / Automatic Shutoff 5s - 15 min / For Indoor & Outdoor / Recommended Installation Height 250 cm

Motion Detector / Range 15 m / Automatic Shutoff 5s - 15 min / Recommended Installation Height 250 cm

Z-Wave MultiSensor with 6 integrated sensors (motion, temperature, light, humidity, vibration and UV).
Built with Z-Wave 700 series - higher range, more efficient and better performance compared to older generation series
Z-Wave Plus V2, SmartStart, S2 Security
With a 10 metre range and a 120° field of view
USB cable or battery operated