Chimneys

This external version of the Grant high level and vertical flues is compatible with all Grant Vortex models. Available in a modular form, the system can cater for most installations. The flue is manufactured from a high grade stainless steel, to ensure longevity. CE mark approved Easy to install Adaptable to any installation Suitable for all Grant oil boilers up to 26kW

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

The Baxi Multifit 93 degree flue bend is for in-line use for internal flue systems for use with Baxi and Potterton boilers. Increases options for boiler locations Designed to be used in conjunction with Baxi 60/100 multifit flue system for Baxi and Potterton ERP Combi and System boiler ranges Easy to install Fixings included

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

This adjustable Wall band is used to provide lateral support for a vertical flue, giving between 50mm -100mm clearance from a non-combustable wall.

Plume management kit suitable for use with Ideal's Logic and Vogue boiler ranges. Suitable for use with all Ideal Logic condensing boilers Extend the flue system to the desired exit spot Aesthetically pleasing design Quick and simple to install Aesthetically pleasing design

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

This adjustable Roof Plate (Flashing) is designed to be installed under your roof slates or tiles to help maintain a weatheproof seal around the flue. Should be used in conjunction with a Storm Collar to complete the installation.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Most commonly used in vertical flue installations, the 1000mm flue extension, from Baxi, allows you to increase the length of a standard flue pipe, permitting further control over where plume is released from the property, avoiding neighbouring properties and other unsuitable areas. The flue extension is both quick to install and aesthetically pleasing, allowing it to blend in with the rest of the boiler system. Suitable for use with all Baxi condensing boilers Extend the flue system to the desired exit spot Aesthetically pleasing design Quick and simple to install

Greenstar Oilfit range the easy fit fluing solution. Multiple fluing options with the ability to flue internal floor standing boilers from the top, rear or side and external boilers from the rear and side. The Oilfit range is quick to install thanks to its push fit connection and forms a gas tight seal. In most cases, it will also eliminate the need to cut the flue. The Greenstar Oilfit range provide an easy fit installation that requires no special tools when fitting flue extensions, elbows and adaptors. Compatible with all Greenstar oil-fired condensing boilers Quick and simple to install Aesthetically pleasing design White-coated finish

Suitable for use with Ideal's Logic+ and Vogue range of boilers, this Flue Vertical Connector helps allow for the connection of a vertical flue pipe directly from a boiler. Easy to install, simply slot both the connector onto your boiler, and then the vertical flue pipes with the easy to use connections. The vertical connector helps funnel the flue fumes out from the boiler, stopping any acidic condensate from staying in the system and therefore causing issues within the system. The robust plastic design will provide a long lasting connection that will last just as long as the boiler. suitable for use with Ideal's Logic & Vogue boiler ranges. Suitable for Ideal Independent, Logic+ and Vogues …

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove.

Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Black painted stainless steel twin wall flue component supplied by colt cowls and manufactured by Roccheggiani.