Chimneys

Suitable for use with the Baxi Duo-tec, EcoBlue and Potterton Promax boilers the Baxi Multifit Telescopic Horizontal Flue provides an effective solution to expel acidic flue gases. With white aluminium on the main extension and a white terminal end, this robust telescopic flue is the standard choice for normal installation through a domestic property wall. Quick and easy to install, the flue pipe features push seal jointing and positive fixing screws providing a simple system to set up, and one which will last the life of the boiler. The flue can be extended to the length of choice, between 315 mm to 500mm. Compatible with Baxi Duo-tec, EcoBlue and Potterton Promax boilers Easy to install Efficient …

Comprised of a white aluminium pipe and a black terminal end, the horizontal boiler flue from Baxi is robust and the standard choice for normal installation through a domestic property wall. Quick and easy to install, the flue features push seal jointing and positive fixing screw creating a simple yet effective flue system. The Baxi Multifit is suitable for Baxi Platinum and Megaflo boiler ranges, providing a flue system that will last the life of the boiler. Compatible with Baxi Platinum and Megaflo boiler ranges Quick and easy to install Push-fit connections Aesthetically pleasing design Full flue kit

Designed for use with the Baxi Duo-Tec, Platinum, and Megaflo boiler ranges, the Baxi Vertical Boiler Flue provides a quick and easy solution to expelling flue gases from a central heating system. Designed to go vertically, it is best installed outside of the property once the flue has pipes have been fed outside. The design is quick and easy to install, with a simple push-fit connection and the anti-corrosive material means the system will last the life of the boiler. Compatible with Baxi Duo-Tec, Platinum, and Megaflo boiler ranges Vertical flue gas expulsion Anti-corrosive Quick and easy installation Push-fit connection

Multifit 135 Deg Bend 60/100 + Fixing Screws 720648501. Multifit 135 Deg Bend 60/100 + Fixing Screws 720648501.

Most commonly used in vertical flue installations, the 1000mm flue extension, from Baxi, allows you to increase the length of a standard flue pipe, permitting further control over where plume is released from the property, avoiding neighbouring properties and other unsuitable areas. The flue extension is both quick to install and aesthetically pleasing, allowing it to blend in with the rest of the boiler system. Suitable for use with all Baxi condensing boilers Extend the flue system to the desired exit spot Aesthetically pleasing design Quick and simple to install

Rear fitting Horizontal Flue Kit 600/100mm for Baxi Heat Only 400 Series Boilers Only. Part of Baxi Multifit flue system Positive screw fixings for all connections

The Baxi Multifit 93 degree flue bend is for in-line use for internal flue systems for use with Baxi and Potterton boilers. Increases options for boiler locations Designed to be used in conjunction with Baxi 60/100 multifit flue system for Baxi and Potterton ERP Combi and System boiler ranges Easy to install Fixings included

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed to connect, and firmly join the Clarke stoves listed below with standard 5" flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

This adjustable Roof Plate (Flashing) is designed to be installed under your roof slates or tiles to help maintain a weatheproof seal around the flue. Should be used in conjunction with a Storm Collar to complete the installation.

This Storm Collar should be fitted above the flashing (Roof Plate) to prevent water entering between the outter skin of the flue and the flashing. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

This adjustable radiation shield may be extended to suit the joist height and is set at a diameter to fit between the outter flue casing and the joist box. Should be used in conjunction with a Ventilated Fire Stop. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick, whilst extending between 75-150mm. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. The Extension Length comes complete with a special locking band and provides an extension of 75mm to 150mm when slipped over a standard length. This can be used

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick, whilst extending between 75-350mm. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. The Extension Length comes complete with a special locking band and provides an extension of 75mm to 350mm when slipped over a standard length. This can be used