TV Antennas

CB LEMM AT-3001 Turbostar 200 cm antenna, with 4 m RG58 cable and PL259-GR plug, 26.5 - 28 MHz, folding.Specifications:- Working tape: ? BGeneral Features:- Working frequency: 26.5 - 28.0 MHz- Maximum power applied: 2000W- Minimum SWR in the center of the band: 1.1- 1.2- Length: 200 cm- Impedance: 50 Ohm- Material: Stainless steel- Connector tip: PL259- Cable length: 4m- Weight: 940 g- Size: 2000 x 80 x 50 mm- Polarization: vertically- Working distance: 20 km- Tiltable: Yes, up to 90 degreesThe package contains:- Radio station antenna: Yes- RG58 cable: Yes, 4m- PL259 plug: Yes

Specifications:Electrical Data:- Type: Base loaded- Radiation: Omnidirectional- Polarization: Linear vertical- Frequency range: 27 … 30 MHz Tunable- Systems: CB 27MHz, 10m-HAM- Bandwidth: ≥ 2MHz SWR ≤ 2- Max Power: 1500 Watts (CW) continuous 5000- Watts (CW) short time- Grounding protection: DC-GroundCable lenght / type: - PERFORMER-5000: 4 m (13.12 ft) / RG58- PERFORMER-5000 PL: Not supplied- TURBO-5000: 4 m (13.12 ft) / RG58- TURBO-5000 PL: Not suppliedConnector: - PERFORMER-5000: Not supplied- PERFORMER-5000 PL: UHF-male (PL-259)- TURBO-5000: Not supplied- TURBO-5000 PL: UHF-male (PL-259)

Panasonic (Panasonic) Set of 4 L-shaped film antennas and cords for navigation. Installation is easy as a coupler-on installation manual is included with the navigation body!! Designed specifically for repairs such as windshield replacement, almost equivalent to genuine Achieves reception sensitivity *Measured by our company (reception sensitivity varies depending on the region, just like the genuine product) 6-month warranty for peace of mind!! (Please refer to the warranty section) Product contents L-type film antenna [I] x 2 L-type film antenna [ II ] x2 Antenna cable (with double-sided tape) x4 Instruction (installation) manual and warranty x1

[Application] Used when distributing TV signals indoors. This device is a high-performance 4-band divider that supports the HF band to the CS-IF band (10MHz to 3224MHz). It also supports 4K8K broadcasting. [Features] The valve seat and housing are made of die-cast zinc, and the back cover is press-fitted, providing a high shielding effect and preventing radio wave leakage and interference. It can be easily mounted to a wall using the mounting screws temporarily fixed to the main body. [Features] A 7C plug can also be attached to the F terminal. (If the outer diameter of the core wire is thicker than 1.5 mm, please use a connector with a pin.) The yellow insulator allows you to identify the input …

[Application] An antenna used when receiving terrestrial digital broadcasting. It is exclusively for horizontal polarization. [Features] Thin and has a highly designed appearance. The beige color makes it a perfect match for the exterior walls of your stylish home. [Features] Compared to conventional Yagi antennas, it is difficult for snow to accumulate and poor reception due to snow is less likely to occur. [Features] Since it uses multi-metal fittings, it can be installed in various locations such as walls, masts, and balconies. [Caution] This product is intended for use in areas with strong or medium electric fields, so if you live in areas with weak radio waves such as areas with weak electric …

Specifications: Outdoor use, horizontal polarization only, for strong/medium electric field areas

The body and cover material is made of nylon resin, which has heat resistance, tracking resistance, etc., and is flame retardant (UL94 V-0) and does not contain harmful substances. Ideal for color-coding and identifying power supply circuits. Wire connections can be made using the crimp terminal method by tightening the terminal screws. NEMA standard number: NEMA 5-15 Color: blue Applicable wire: 2PNCT/VCT 2mm² Wire connection method: Crimp terminal type Applicable crimp terminal: R2-4 Body flame retardant: UL94 V-0/Material: Nylon cover/RoHS compliant

It has a clean design that does not spoil the appearance, and can be installed anywhere other than on the roof. The easy slide multi-metal fittings allow it to be installed in a variety of locations, including walls and balcony handrails, and there are only a few mounting parts, making it easy to install. Due to its excellent front-to-front ratio characteristics, the structure is less likely to cause problems with poor reception due to wall reflections, etc. It is possible to adjust the left and right directions by 60 degrees, and by combining the adjustment function and the half width of the antenna performance, it is also possible to receive radio waves from 180 degrees. For horizontal polarization …

[Application] Used outdoors to separate TV waves into two (compatible with 3224MHz) [Features] Achieved the smallest size in the industry. [Features] The appearance is a resin case with drip-proof structure. The interior has a shield structure that is effective in preventing radio wave leakage and intrusion. [Performance] Current passing between all output terminals and input terminals (maximum DC15V/0.8A) [Specifications] Compatible mast diameter: Φ22-50mm

【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. [Applications] Indoor TV plug that can be attached to 4C and 5C size antenna cables. Connect the cable to the connection terminal of the TV and TV outlet. [Features] Cable processing size is engraved on the main body. It reduces the hassle of measuring cable size, making it easier and more…

[Features] Compatible with FM, VHF, UHF, BS, up to CS2150MHz, CATV10~770MHz. All Dentsu type. [Performance] Distribution loss: (222~770MHz) 8.5dB, (770~2150MHz) 9.5~11.5dB [Note] Cannot be used with AC power. [Accessories] F type plug (for 5C cable) number of terminals, 5 mounting screws (already installed on the main unit)

Country of origin: China Assembly type Reception channel: 13~52ch, reception frequency: 470~710MHz, antenna gain: 6.5~8.5dB, booster performance: 17~21dB amplification, total gain: 23~28dB Output level: 90dBμV, impedance: 75, (F type) Ω, voltage standing wave ratio: 3 or less, power half width: 80 degrees or less, front/rear ratio: 20 or more dB, power supply: DC15V/0.03A, swept area: 0.116m2, mast diameter used: φ22, ~49mm, square column: 25×25~45×45mm ●Power supply (power inserter/AC adapter)/Reception frequency: 13~52MHz, Insertion loss: 1.0 dB or less, Impedance: 75 (F type) Ω, AC adapter input: AC100 (50/60Hz) V, AC adapter output: DC15V/0.35A Accessories: Stand: 1 piece, Mounting bracket …

Country of origin: China [Application] CS/BS/UHF/V-Low/FM booster 4K8K (3224MHz) compatible [Features] CS/BS/UHF/V-Low/FM booster for small and medium scale. [Features] Highly shielded type with unnecessary radiation of 34dBμV/m or less [Specifications] Gain ●FM/V-Low 33~38dB (with cut function) ●UHF35~40dB●BS/CS-IF (1000MHz) 28~33dB (/2150MHz) 32~37dB (/3224MHz) 35~40dB [Specification] Power supply voltage: AC100±10(50/60Hz) [Accessories] 2 mounting screws (one is already attached to the main unit)

【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. [Compatible with many standards] This coaxial cable has a cable diameter based on the JIS standard commonly used in terrestrial digital antenna and parabolic antenna installation work. Compatible with a wide range of broadcasting standards including UHF, CATV, BS, CS, 2K, 4K, and 8K (~322…

【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. This is a mixer that mixes digital terrestrial broadcasting signals (UHF) and BS/CS satellite signals and transmits them indoors using a single cable with low loss. [Industry's smallest and lightest, yet strong weather resistance and durability] The external casing (outer case) is small and …

Antenna type: 9-element Yagi antenna Frequency: 1260MHz~1300MHz Gain: 15.1dBi Application: For fixed stations Input impedance: 50Ω Input resistance: 50W Voltage standing wave ratio: 1.5 or less Plug: NJ (with coaxial cable 30cm) Mounting bracket (compatible mast diameter): φ16-34

Antenna type: 3-element Yagi antenna Frequency: 351MHz band (digital simple radio) Gain: 8.15dBi Use: Handy Input impedance: 50Ω

This is a set product that includes a mobile antenna (for 144/430 MHz) and a magnetic base (coaxial cable 5m). The antenna is a flexible soft type, so you can easily park it in a multi-storey parking lot without worrying about the height of your vehicle!　 The antenna base is a strong magnet type, so you can use it with confidence. In addition, the cable length is 5m, making it easy to maneuver even in large vehicles. Antenna: Gain 2.15 / 3.0db, Maximum output 100W, VSWR 1.5 or less, Impedance 50Ω, 38cm Magnetic base: Diameter 9cm, height 27mm (excluding connector part), Coaxial cable: RG-58, 5m, Plug MJ-MP ★☆ Soft mobile antenna and magnet base (coaxial cable 5m tangent MJ-MP) ☆★ ◆ This is a…

The MLA-30+ (plus) loop antenna is compact in size, which makes it convenient and stable to set up, can be installed on balconies, rooftops, and other places easily. It is an effective antenna for short-wave listeners (SWL) and amateur radio enthusiasts (HAM) to receive medium-wave and short-wave in limited living areas to receive medium and short-wave. Frequency coverage is from 0.5MHz to 30 MHz. You can have a try. Features: The MLA-30+ (plus) loop antenna is compact in size, which makes it convenient and stable to set up, can be installed on balconies, rooftops, and other places easily. It is an effective antenna for short-wave listeners (SWL) and amateur radio enthusiasts (HAM) to receive …

This is a set of antenna, include a 500KHz-2000KHz MediumWave antenna, and a 4MHz-24MHz ShortWave antenna. Features: Easy to Install and Use: Our circular antenna is designed for easy installation and simple operation. Fine Workmanship and No Burrs: Our circular antenna is finely crafted with no burrs, ensuring a smooth and safer user experience. Dual-color for Frequency Differentiation: Our loop antenna Features dual-color design, which distinguishes different frequencies and allows users to choose the frequency that suits their needs. Fine Quality Material: Our loop antenna is made of fine quality material that ensures durability and longevity, providing users with long-lasting

The 10 element aerial is perfect for strong signal areas. Complete with everything you need to mount the aerial & route to a TV. Features: Mast clamp – includes universal clamp to fit most masts Direct dipole connection – simple cable connection into dipole Receives all available digital terrestrial TV signals Designed & tested for indoor & outdoor use Can be mounted externally or in a loft space High quality, durable & robust construction Specifications: Dimensions: H:48.0 x W:18.0 x D:6.7 cm Colour: Silver Guarantee:1 year Material: Aluminium Model Number: MX0100

mass production electrician

For horizontal polarization Equivalent to 20 element antenna outdoor Built-in booster

For horizontal polarization Equivalent to 20 element antenna outdoor Built-in booster