Routers & Trimmers

Plunge Router / 1,010 Watt / 20,000 rpm Idle Speed (max.) / Max. Cutting Depth 59 mm

Slot Milling Machine / 1,700 Watt / 4,000 rpm Idle Speed (max.) / Max. Cutting Depth 40 mm / Disc Diameter 150 mm

Milling Accessories

Plunge Router / 1,020 Watt / 34,000 rpm Idle Speed (max.) / Max. Cutting Depth 40 mm

Milling Accessories

Biscuit Jointer / 900 Watt / 1,200 rpm Idle Speed (max.) / Max. Cutting Depth 19 mm

Plunge Router / 2,050 Watt / 23,000 rpm Idle Speed (max.)

The Trend WRT Workshop Router Table has a steel leg frame with adjustable feet, a large, laminated MDF table and a quick-release aluminium extrusion back fence with sliding MDF cheeks. Its removable 6.35mm thick aluminium insert plate has a 98mm diameter aperture pre-drilled for Trend TBC routers, T11 and T14 routers. There is also a quick raiser and quick-release facility for the Trend T11 and T14 routers. The high back fence with a fully adjustable guard assembly and the no-volt release switch provide increased user safety. Other features include fully adjustable side finger pressure, front and side adjustable feather pressure guards, lead on pin for bearing guided curved work and a mitre …

WORKTOP SCRIBER M/KWS01

Allows grooves and tenons to be cut using a router. Working length based on 30 mm guide bush and 12 mm diameter cutter being used:- Max. without end stops used 412 mm Max. with one end stop used 397 mm Max. with two end stops used 382 mm Max. working width using end stops* (12mm dia. cutter) 18 mm Max. width adjustment depending on router base diameter 70 mm *Due to end stop length

Pair of sliding friction clamps with 32mm clamping thickness.

Plunge router base base accessory for the Varijig clamp guides. Plate length 228 mm Plate width 229 mm Plate thickness 6 mm This product includes: 1 x 2mm A/F hex key

VJS/CG/50 VARIJIG CLAMP GUIDE 50IN

VJS/CG/36 CLAMP GUIDE 36IN

For accurate guiding of router, saws and jigsaws. Max clamp length 24 inches (610 mm) Min clamp length 1/2 inch (12.7 mm) Extrusion width 54mm Extrusion height 15.8mm Overall length 835mm Length fixed jaw to end of handle 125mm Length max position of sliding jaw to clamp end 98mm Sliding jaw finger wing width 73mm

Trend VARIJIG Varijig System Adjustable Frame The Varijig from Trend is an adjustable frame and guide for use with a router for cutting rectangles and squares. Using the Varijig allows a router to cut recesses, slots and face panel moulds with a maximum working area of 600mm x 600mm. It can also be used to create panel doors for kitchens etc. Features: Four lengths of 700mm extrusion with dual metric/imperial measuring scales Working area 600mm x 600mm. Includes router anti-tilt block Cross cut accuracy to 0.1mm, a square is required to square frame before use Use with a guide bush with minimum 8mm spigot length, or use Unibase as guide Secure with standard clamps or use optional clamp kit

This adjustable frame & guide system allows you to make the most of a portable router. Simple to use, it provides a template for rectangles & squares, plus it enables recesses, slots & face panel moulds to be routed more easily & more accurately.

UNIVERSAL SUB BASE C/W PINS & BUSH

UNI/CS COUNTERSINK

T-SQUARE

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc. Overall length 703 mm Blade length 645 mm Blade thickness 3 mm Blade width at butt 70 mm Blade width at end 42 mm Butt length 280 mm Butt thickness 8 mm Butt width 58 mm Butt length from guiding edge 140 mm Square tolerance 1mm per metre

TR40D X 1/2 TCT TWO FLUTE CUTTER LONG SHANK 15 X 25MM

TR37 X 1/2 TCT TWO FLUTE CUTTER LONG SHANK 12 X 63MM

TR35 X 1/4 TCT BISCUIT JOINTER SET 4.0 X 37.2MM